journal article·2023-12

Simple stitch-assisted carbon fiber-aluminum laminates via out-of-autoclave process

Yongtak Kim, Wonjin Na, Minkook Kim, Min Wook Lee

Publisher page

Abstract

Fiber–metal laminates (FMLs) are hybrid materials that provide the advantages of both metal and fiber-reinforced polymer composite (FRP) such as improved damage tolerance and impact strength, particularly in aerospace and automotive applications. However, the production of FMLs remains expensive because the manufacturing process is performed in an autoclave. In addition, delamination failure due to low interfacial adhesive strength between the metal and fiber layer is a problem that must be solved to improve the mechanical properties of FMLs. In this study, simple stitch-assisted carbon fiber-aluminum laminates were developed using vacuum-assisted resin transfer molding (VARTM). The FMLs produced through vacuum-assisted resin transfer molding were stitched with aramid fibers through holes on Al sheets for the resin flow associated with the VARTM. The mechanical properties of the FMLs were investigated by impact and compression after impact tests as well as double cantilever beam and flexural tests. The stitching effectively improved the interfacial strength and toughness owing to the anchoring between the aluminum and carbon fiber layers, thus preventing delamination crack propagation. As a result, the stitched FML with significantly improved interfacial adhesive and toughness was developed by the VARTM process, which will accelerate the application of FML to various lightweight structures.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Fiber-reinforced polymer composites · Epoxy Resin Curing Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Advanced Composite Materials, Korea Institute of Science and Technology, Bongdong-eub, Korea

Funding

Ministry of Trade, Industry & Energy · Korea Institute of Science and Technology

References (55)

Show source-provided references
1. Caspari T · Euro Hybrid Mater Struct · 2016 · 2016 · 81
2. 10.1007/s11837-012-0424-z10.1007/s11837-012-0424-z ↗
3. Shea SB
4. 10.1016/j.egypro.2016.06.10610.1016/j.egypro.2016.06.106 ↗
5. 10.1080/15440478.2020.178791910.1080/15440478.2020.1787919 ↗
6. 10.1016/j.compstruct.2019.03.07910.1016/j.compstruct.2019.03.079 ↗
7. 10.1016/j.jmrt.2019.04.00510.1016/j.jmrt.2019.04.005 ↗
8. 10.1016/j.polymertesting.2018.09.01710.1016/j.polymertesting.2018.09.017 ↗
9. Sultan M, Worden K, Staszewski W, et al. Impact damage detection and quantification in CFRP laminates; a precursor to machine learning. In: 7th International Workshop on Structural Health Monitoring, Stanford, CA, 9–11 September 2009, p. 11.
10. 10.1002/pc.1021110.1002/pc.10211 ↗
11. 10.1080/1042691940893490510.1080/10426919408934905 ↗
12. 10.1016/S0266-3538(00)00002-610.1016/S0266-3538(00)00002-6 ↗
13. 10.1016/S0924-0136(00)00411-810.1016/S0924-0136(00)00411-8 ↗
14. 10.1016/j.matdes.2011.03.01110.1016/j.matdes.2011.03.011 ↗
15. 10.1016/S0924-0136(96)02652-010.1016/S0924-0136(96)02652-0 ↗
16. 10.1016/S1290-0958(01)90050-410.1016/S1290-0958(01)90050-4 ↗
17. Vlot A · 2011
18. 10.1016/S1005-0302(10)60053-910.1016/S1005-0302(10)60053-9 ↗
19. 10.1016/j.compositesa.2011.04.00110.1016/j.compositesa.2011.04.001 ↗
20. 10.1016/0010-4361(91)90672-410.1016/0010-4361(91)90672-4 ↗
21. 10.1080/15440478.2020.173959410.1080/15440478.2020.1739594 ↗
22. 10.1016/j.compstruct.2019.02.04710.1016/j.compstruct.2019.02.047 ↗
23. 10.1007/s00170-019-04103-410.1007/s00170-019-04103-4 ↗
24. Jensen BJ, Cano RJ, Hales SJ, et al. (eds) Fiber metal laminates made by the VARTM process. In: 17th International Conference on Composite Materials, ICCM-17, Edinburgh, UK, 27–31 July 2009.
25. Tuncol G, Loos A, Cano R (eds) Simulation of resin infusion in the manufacture of fiber metal laminates by VARTM. In: Proceedings of the ICCM, Jeju Island, South Korea, 21–26 August 2011.
26. 10.1111/j.1460-2695.2010.01509.x10.1111/j.1460-2695.2010.01509.x ↗
27. Cano RJ · SAMPE J · 2011 · 47 · 50
28. Jensen BJ, Cano RJ, Hales SJ, et al. Fabrication of fiber metal laminates by non -autoclave processes. In: SAMPE Technical Conference. Baltimore, MD, 5–7 June 2007.
29. Seemann WH · 1990
30. 10.1016/1359-835X(95)98788-D10.1016/1359-835X(95)98788-D ↗
31. 10.1016/j.compscitech.2003.09.02410.1016/j.compscitech.2003.09.024 ↗
32. 10.1016/j.compstruct.2015.12.02610.1016/j.compstruct.2015.12.026 ↗
33. 10.1016/j.ijfatigue.2006.07.00610.1016/j.ijfatigue.2006.07.006 ↗
34. 10.1016/j.ijfatigue.2016.11.00110.1016/j.ijfatigue.2016.11.001 ↗
35. 10.1177/152808372094710610.1177/1528083720947106 ↗
36. 10.1016/j.polymertesting.2019.02.00210.1016/j.polymertesting.2019.02.002 ↗
37. 10.1080/1042691100374791510.1080/10426911003747915 ↗
38. 10.1002/jbm.a.3209710.1002/jbm.a.32097 ↗
39. 10.1016/j.jmatprotec.2007.11.14710.1016/j.jmatprotec.2007.11.147 ↗
40. 10.1590/S1516-1439201100500004410.1590/S1516-14392011005000044 ↗
41. 10.1016/j.surfcoat.2004.07.07610.1016/j.surfcoat.2004.07.076 ↗
42. 10.1016/0266-3538(94)90103-110.1016/0266-3538(94)90103-1 ↗
43. 10.1016/S0266-3538(97)00229-710.1016/S0266-3538(97)00229-7 ↗
44. 10.1016/j.euromechsol.2005.10.00410.1016/j.euromechsol.2005.10.004 ↗
45. 10.1016/j.compscitech.2006.03.03210.1016/j.compscitech.2006.03.032 ↗
46. ASTM International · 2020
47. ASTM International · 2017
48. ASTM International · 2013
49. ASTM International · 2017
50. 10.1016/j.compstruct.2018.01.02010.1016/j.compstruct.2018.01.020 ↗
51. Vlot A · J Phys IV · 1997 · 07 · 1045
52. 10.1016/j.acme.2014.09.00710.1016/j.acme.2014.09.007 ↗
53. 10.1016/j.polymertesting.2018.02.00910.1016/j.polymertesting.2018.02.009 ↗
54. Safri S · IJES · 2014 · 3 · 50
55. 10.1016/j.compstruct.2016.11.01510.1016/j.compstruct.2016.11.015 ↗