journal article·2025-08Open access

Mechanothermal assessment of outdoors aged hybrid glass fibre reinforced polymer composite filled with fly ash as industrial waste

Dibyajyoti D. Pradhan, Ananta P. Chakraverty, Ajit Behera, Subhrajit Beura, Upendra K. Mohanty

Abstract

Industrial fly ash impregnated glass fibre reinforced polymer (GFRP) composites were examined to assess their overall characteristics in adverse ambient conditions, keeping in mind that use of filler materials in FRP composites was expected to enhance the strength properties of the material. GFRP composite specimens with 2–10 wt % industrial fly ash were fabricated in the laboratory. These were exposed to open ambient ageing for 120 days. The samples impregnated with 8 wt % fly ash and aged for 120 days were seen to absorb the minimum moisture and exhibited the maximum ILSS of 35.19 MPa and flexural strength of 690 MPa, respectively. These samples also exhibited the highest T g of 101.53°C as revealed through low temperature DSC. It was also observed that the 8 wt% fly ash containing samples aged in the open for 120 days showed the ILSS to be 5.83% higher and T g to be 21.95% higher as compared to the unaged GFRP samples without fly ash. FTIR spectra confirm the trend of thermo-mechanical properties. Both optical and scanning electron microscopy of the fractured surfaces of the test samples revealed the modes of mechanical failure of the hybrid GFRP composite with their indicative properties at optimized extent of fly ash dispersion.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Physics, Gangadhar Meher University, Sambalpur, India

Department of Metallurgical and Materials Engineering, National Institute of Technology, Rourkela, India

Department of Mechanical Engineering, ITER, Sikhya O Anusandhan (SOA) University, Bhubaneswar, India

Funding

World Bank Project

References (48)

Show source-provided references
1. 10.1016/j.compscitech.2022.10976210.1016/j.compscitech.2022.109762 ↗
2. 10.1016/j.compositesa.2020.10578410.1016/j.compositesa.2020.105784 ↗
3. 10.1007/s10443-021-09943-610.1007/s10443-021-09943-6 ↗
4. 10.1177/073168441875435910.1177/0731684418754359 ↗
5. 10.1016/j.compositesb.2018.11.04710.1016/j.compositesb.2018.11.047 ↗
6. 10.1177/002199831141023710.1177/0021998311410237 ↗
7. 10.1016/j.mtcomm.2022.10505610.1016/j.mtcomm.2022.105056 ↗
8. 10.1016/j.jobe.2023.10598510.1016/j.jobe.2023.105985 ↗
9. 10.1016/j.matpr.2023.05.42210.1016/j.matpr.2023.05.422 ↗
10. 10.1002/app.5322310.1002/app.53223 ↗
11. 10.1016/j.compstruct.2008.04.01510.1016/j.compstruct.2008.04.015 ↗
12. Krauklis AE, Starkova O, Gibhardt D, et al. Reversible and irreversible effects on the epoxy GFRP fiber-matrix interphase due to hydrothermal aging. Composites Part C 2023; 12(Aug): 100395.
13. 10.1016/j.matpr.2022.04.96510.1016/j.matpr.2022.04.965 ↗
14. 10.1016/j.jcis.2005.12.02310.1016/j.jcis.2005.12.023 ↗
15. Swain S Beura S Thatoi DN et al. Durability of GFRP composite exposed to outdoors weathering. Compos Commun; 13(Jun): 22–29.10.1016/j.coco.2019.02.003 ↗
16. 10.1080/15440478.2022.206918310.1080/15440478.2022.2069183 ↗
17. 10.1007/s12221-021-0145-410.1007/s12221-021-0145-4 ↗
18. 10.1080/15685543.2014.87086610.1080/15685543.2014.870866 ↗
19. 10.1080/09243046.2016.118782110.1080/09243046.2016.1187821 ↗
20. 10.1177/0021998323120988110.1177/00219983231209881 ↗
21. 10.1016/j.pecs.2009.11.00310.1016/j.pecs.2009.11.003 ↗
22. 10.1016/j.compscitech.2006.02.00410.1016/j.compscitech.2006.02.004 ↗
23. 10.1016/j.matpr.2017.02.19310.1016/j.matpr.2017.02.193 ↗
24. Devendra K, Rangaswamy T. Strength characterization of E-glass fiber reinforced epoxy composites with filler materials. J Miner Mater Char Eng 2013; 1: 353–357.
25. 10.1016/j.matpr.2020.02.50110.1016/j.matpr.2020.02.501 ↗
26. 10.1007/s10163-021-01196-610.1007/s10163-021-01196-6 ↗
27. 10.1016/j.compositesb.2019.10730110.1016/j.compositesb.2019.107301 ↗
28. 10.4028/www.scientific.net/AMM.592-594.18610.4028/www.scientific.net/AMM.592-594.186 ↗
29. 10.1016/j.compositesb.2015.09.04910.1016/j.compositesb.2015.09.049 ↗
30. 10.1002/pc.2322210.1002/pc.23222 ↗
31. 10.1016/j.matpr.2023.01.14010.1016/j.matpr.2023.01.140 ↗
32. 10.1016/j.matdes.2013.10.02610.1016/j.matdes.2013.10.026 ↗
33. 10.1016/j.compscitech.2020.10820710.1016/j.compscitech.2020.108207 ↗
34. 10.1080/15376494.2023.224581710.1080/15376494.2023.2245817 ↗
35. 10.1177/096739112097350510.1177/0967391120973505 ↗
36. Elkington M, Bloom D, Ward C, et al. Hand layup: understanding the manual process. Adv Manuf Polym Compos Sci 2015; 1(3): 138–151.
37. Hull D, Clyne TW. Introduction to composite materials” Cambridge Solid State Science Series. 2nd ed. Cambridge University Press, 1996.
38. 10.1002/app.1986.07032080410.1002/app.1986.070320804 ↗
39. 10.1106/NUYP-PARA-RA5R-7NUE10.1106/NUYP-PARA-RA5R-7NUE ↗
40. Kumar DS, Shukla MJ, Mahato KK, et al. Effect of post-curing on thermal and mechanical behavior of GFRP composites. In IOP conference series. Mater Sci Eng 2015; 75: 012012.
41. 10.1016/j.compositesb.2009.03.00410.1016/j.compositesb.2009.03.004 ↗
42. 10.1016/j.fuel.2008.07.02710.1016/j.fuel.2008.07.027 ↗
43. Chakraverty AP. Some aspects of Evaluation of GFRP composite depending on its end Use, PhD thesis. Rourkela: NIT, 2015.
44. 10.3390/app1307417110.3390/app13074171 ↗
45. 10.1016/j.coco.2016.11.00110.1016/j.coco.2016.11.001 ↗
46. 10.1680/emr.12.0000910.1680/emr.12.00009 ↗
47. 10.1007/s11705-021-2042-110.1007/s11705-021-2042-1 ↗
48. 10.1177/152808371559498010.1177/1528083715594980 ↗