journal article·2025-11Open access

Investigating competition of strong interfacial interaction and chain scission in PBAT/EVOH/GO composite by rheological measurements

Mehdi Elhamnia, Parsa Dadashi, Ghodratollah Hashemi Motlagh

Abstract

The blends of poly(butylene-adipate-co-terephthalate)/poly(ethylene-vinyl alcohol) (PBAT/EVOH) with varying amounts of graphene oxide (GO) were prepared by melt mixing. The localization of GO in PBAT and at the interface was confirmed by morphological evaluation. The dual effect of GO in degradation of PBAT phase and interface improvement of PBAT/EVOH was examined by rheological measurements and models. The results showed that the improved interfacial interaction induced by GO dominates its degradation effect in PBAT. Rheological analysis revealed that the interfacial elasticity originating from GO dominates the total elasticity of the system, resulting in an increase in the final elasticity. Generalized Fractional Zener (GFZ) model was used to analyze elasticity of the polymer blend and its nanocomposites with a well fit to the experimental results. Also, the Lee–Park model was used to distinguish the effects of particle interactions as well as interface strengthening from deterioration of matrix modulus due to PBAT degradation by GO. The increased elasticity of the interface showed that the strengthening effect of GO at the interface overcomes its degradation effect. Also, the application of Coran model to analyze phase homogeneity revealed a linear increase in interfacial interaction with GO concentration.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer crystallization and properties · biodegradable polymer synthesis and properties · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

University of Tehran

Qale-e-Hassan Khan

References (46)

Show source-provided references
1. 10.1007/s10924-011-0317-110.1007/s10924-011-0317-1 ↗
2. 10.1038/s41529-022-00277-710.1038/s41529-022-00277-7 ↗
3. 10.1007/s00289-021-04065-210.1007/s00289-021-04065-2 ↗
4. 10.1016/j.progpolymsci.2021.10139510.1016/j.progpolymsci.2021.101395 ↗
5. 10.1007/s10924-021-02279-z10.1007/s10924-021-02279-z ↗
6. 10.1088/2053-1591/ac55c710.1088/2053-1591/ac55c7 ↗
7. 10.1039/D2PY01495E10.1039/D2PY01495E ↗
8. 10.1039/D2SM01577C10.1039/D2SM01577C ↗
9. Elhamnia M Motlagh GH Jafari SH. A multiple approach in determination of interfacial tension of biodegradable melt-mixed PBAT/EVOH blends: correlation of morphology rheology and mechanical properties. Polym Test; 82: 106301. DOI: 10.1016/j.polymertesting.2019.106301 Epub ahead of print 2020.10.1016/j.polymertesting.2019.106301 ↗
10. 10.1002/app.5385510.1002/app.53855 ↗
11. 10.1016/j.eurpolymj.2016.02.02310.1016/j.eurpolymj.2016.02.023 ↗
12. 10.1016/j.msec.2019.01.08110.1016/j.msec.2019.01.081 ↗
13. 10.1016/j.polymertesting.2015.05.00710.1016/j.polymertesting.2015.05.007 ↗
14. 10.1016/j.sna.2019.05.04010.1016/j.sna.2019.05.040 ↗
15. Dadashi P, Babaei A, Khoshnood M. Investigating the role of PA6/GO interactions on the morphological, rheological, and mechanical properties of PA6/ABS/GO nanocomposites. Polym Technol Mater 2023; 62: 756–770.
16. 10.3390/polym1410210210.3390/polym14102102 ↗
17. 10.1016/j.mtcomm.2021.10258610.1016/j.mtcomm.2021.102586 ↗
18. Feng P, Shen S, Shuai Y, et al. PLLA grafting draws GO from PGA phase to the interface in PLLA/PGA bone scaffold owing enhanced interfacial bonding. Sustain Mater Technol 2023; 35: e00566.
19. 10.1016/j.compscitech.2018.01.00810.1016/j.compscitech.2018.01.008 ↗
20. 10.1021/nn201717a10.1021/nn201717a ↗
21. 10.3390/nano904059010.3390/nano9040590 ↗
22. 10.1016/j.polymdegradstab.2018.10.00710.1016/j.polymdegradstab.2018.10.007 ↗
23. 10.3390/nano1221377210.3390/nano12213772 ↗
24. Salehiyan R Nofar M Malkappa K et al. Effect of nanofillers characteristics and their selective localization on morphology development and rheological properties of melt-processed polylactide/poly(butylene adipate-co-terephthalate) blend composites. Polym Eng Sci; 60: 2749–2760. DOI: 10.1002/pen.25505 Epub ahead of print 5 November 2020.10.1002/pen.25505 ↗
25. 10.1007/s00396-022-05043-410.1007/s00396-022-05043-4 ↗
26. 10.1021/acs.macromol.5b0067910.1021/acs.macromol.5b00679 ↗
27. 10.1007/978-3-030-45085-4_16710.1007/978-3-030-45085-4_167 ↗
28. 10.1016/j.compositesb.2018.08.05810.1016/j.compositesb.2018.08.058 ↗
29. Dadashi P, Babaei A, Rostami A. A new modified emulsion model for immiscible binary polymeric blends containing nanoparticles distributed in droplets. Iran J Polym Sci Technol 2021; 34: 83–94.
30. 10.1002/pen.2589310.1002/pen.25893 ↗
31. 10.3139/217.350810.3139/217.3508 ↗
32. Utracki LA, Wilkie CA. Polymer blends handbook. 2nd ed. Dordrecht: Springer, 2002.
33. 10.1002/app.4846610.1002/app.48466 ↗
34. 10.1002/app.1122010.1002/app.11220 ↗
35. 10.1002/app.5175010.1002/app.51750 ↗
36. 10.1002/polb.2203410.1002/polb.22034 ↗
37. 10.1016/j.polymer.2020.12336910.1016/j.polymer.2020.123369 ↗
38. 10.1016/S0016-2361(03)00065-610.1016/S0016-2361(03)00065-6 ↗
39. Aid S, Eddhahak A, Ortega Z, et al. Experimental study of the miscibility of ABS/PC polymer blends and investigation of the processing effect. J Appl Polym Sci; 134: 322–328.
40. 10.1002/pen.2610010.1002/pen.26100 ↗
41. 10.1007/s00397000013710.1007/s003970000137 ↗
42. 10.1007/s00397020001010.1007/s003970200010 ↗
43. 10.1007/BF0036900010.1007/BF00369000 ↗
44. 10.1007/BF0039632810.1007/BF00396328 ↗
45. 10.1002/app.1976.07020110810.1002/app.1976.070201108 ↗
46. 10.1002/app.4471910.1002/app.44719 ↗