journal article·2025-10

Thermo-mechanical characterizations and erosion wear studies of fumed silica-reinforced jute/epoxy composites

Pramod Kumar Parida, Mohammad Irquam Alam, Ritwik Ghosh, Arun Kumar Pradhan, Mihir Kumar Pandit, Sunil Manohar Maharana

Publisher page

Abstract

This study investigates the influence of nano-fumed silica content on thermo-mechanical properties of jute/epoxy composites. The results reveal that jute composites without filler (JJJJ-0) exhibited highest tensile strength (33.01 MPa) and percentage elongation (1.9522%), while composites with 1.5% and 2.5% filler demonstrated the highest tensile modulus (1967 MPa) and flexural modulus (2432.9 MPa), respectively. The observation demonstrates that as the filler content increases in jute composites, tensile strength decreases but flexural strength increases. However, an exception is noted for sample containing excess filler (3.5%), which exhibited the lowest flexural strength (44.36 MPa). The composite with 2.5% filler exhibited the highest flexural strength (53.5 MPa). Thermal analysis indicated that the addition of nanofiller enhanced both the activation energy (E a ) and thermal stability of the jute composites. A four-layer carbon composite without filler (CCCC-0) was also fabricated in order to compare wear and thermal stability performance with jute composites. The wear study was performed at different temperatures and found that JJJJ-3.5 composite exhibited superior wear resistance at ambient temperature, while CCCC-0 composite had better wear resistance at high temperatures. Also, the surface morphology of the eroded surface was examined using a scanning electron microscope (SEM) to study the failure mechanism of composites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Tribology and Wear Analysis · Flame retardant materials and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Sciences, Indian Institute of Technology Bhubaneswar, Bhubaneswar, India

Department of Aerospace Engineering and Applied Mechanics, Indian Institute of Engineering Science and Technology, Shibpur, India

References (66)

Show source-provided references
1. 10.1016/j.compositesa.2011.11.01910.1016/j.compositesa.2011.11.019 ↗
2. 10.1002/mame.20140008910.1002/mame.201400089 ↗
3. 10.1016/j.compositesa.2015.08.03810.1016/j.compositesa.2015.08.038 ↗
4. 10.1016/j.polymertesting.2020.10669210.1016/j.polymertesting.2020.106692 ↗
5. 10.1016/j.polymertesting.2008.06.00210.1016/j.polymertesting.2008.06.002 ↗
6. 10.1177/073168441663389810.1177/0731684416633898 ↗
7. 10.1007/s10853-013-7458-710.1007/s10853-013-7458-7 ↗
8. 10.1016/j.carbpol.2014.03.03910.1016/j.carbpol.2014.03.039 ↗
9. 10.1080/15440478.2010.52929910.1080/15440478.2010.529299 ↗
10. 10.1016/j.progpolymsci.2012.04.00310.1016/j.progpolymsci.2012.04.003 ↗
11. 10.1002/app.1046010.1002/app.10460 ↗
12. 10.1080/0040500730863041610.1080/00405007308630416 ↗
13. 10.1007/BF0232933010.1007/BF02329330 ↗
14. 10.1023/A:100101391377310.1023/A:1001013913773 ↗
15. 10.1002/app.1963.07007040310.1002/app.1963.070070403 ↗
16. Broutman LJ Sahu S. A new theory to predict cumulative fatigue damage in fiberglass reinforced plastics. In: Composite materials: Testing and design (second conference). ASTM International 1972.10.1520/STP27746S ↗
17. Suresha B, Guggare S, Raghavendra N. Effect of TiO2 filler loading on physico-mechanical properties and abrasion of jute fabric reinforced epoxy composites. Mater Sci Appl 2016; 7: 510–526.
18. 10.1016/S1359-835X(98)00157-210.1016/S1359-835X(98)00157-2 ↗
19. Kulaksızoğlu Z. Isı Yalıtım Sektör Araştırması. Istanbul: İstatistik Şubesi, 2006.
20. 10.1201/978142000598110.1201/9781420005981 ↗
21. 10.1016/j.cryogenics.2004.07.00210.1016/j.cryogenics.2004.07.002 ↗
22. 10.1016/j.polymer.2014.10.01810.1016/j.polymer.2014.10.018 ↗
23. 10.1016/j.matdes.2014.02.03410.1016/j.matdes.2014.02.034 ↗
24. 10.1557/mrs2003.12610.1557/mrs2003.126 ↗
25. 10.1016/j.compositesa.2013.09.00510.1016/j.compositesa.2013.09.005 ↗
26. 10.1039/C5NR01354B10.1039/C5NR01354B ↗
27. 10.1080/15440478.2020.177724610.1080/15440478.2020.1777246 ↗
28. 10.1177/073168441773518310.1177/0731684417735183 ↗
29. 10.1177/073168441142060610.1177/0731684411420606 ↗
30. 10.1016/j.compscitech.2010.03.00110.1016/j.compscitech.2010.03.001 ↗
31. 10.1177/073168441877711110.1177/0731684418777111 ↗
32. 10.1016/j.msea.2006.04.03110.1016/j.msea.2006.04.031 ↗
33. 10.1177/002199831351426010.1177/0021998313514260 ↗
34. 10.1002/(SICI)1097-4628(19980103)67:1<87::AID-APP10>3.0.CO;2-210.1002/(SICI)1097-4628(19980103)67:1<87::AID-APP10>3.0.CO;2-2 ↗
35. 10.1016/S0927-796X(00)00012-710.1016/S0927-796X(00)00012-7 ↗
36. 10.1016/j.polymer.2003.08.02110.1016/j.polymer.2003.08.021 ↗
37. 10.1016/j.coco.2019.11.00310.1016/j.coco.2019.11.003 ↗
38. 10.1002/14356007.a23_58310.1002/14356007.a23_583 ↗
39. 10.1016/j.compositesb.2010.09.02510.1016/j.compositesb.2010.09.025 ↗
40. 10.1016/j.conbuildmat.2019.03.25710.1016/j.conbuildmat.2019.03.257 ↗
41. 10.1016/j.compositesa.2008.09.01010.1016/j.compositesa.2008.09.010 ↗
42. 10.1021/cr400086v10.1021/cr400086v ↗
43. 10.1016/j.polymer.2007.12.03510.1016/j.polymer.2007.12.035 ↗
44. 10.1016/j.jclepro.2017.10.10110.1016/j.jclepro.2017.10.101 ↗
45. 10.1002/pc.2641310.1002/pc.26413 ↗
46. 10.1016/j.matpr.2019.12.18410.1016/j.matpr.2019.12.184 ↗
47. 10.1016/j.proeng.2014.12.44810.1016/j.proeng.2014.12.448 ↗
48. 10.1016/j.proeng.2013.01.07910.1016/j.proeng.2013.01.079 ↗
49. 10.1177/002199831349995510.1177/0021998313499955 ↗
50. 10.1016/j.matpr.2017.06.22910.1016/j.matpr.2017.06.229 ↗
51. 10.1177/00405175930630030310.1177/004051759306300303 ↗
52. 10.24874/ti.2018.40.03.0110.24874/ti.2018.40.03.01 ↗
53. 10.1016/j.matpr.2020.12.66010.1016/j.matpr.2020.12.660 ↗
54. 10.1016/j.matpr.2022.04.81210.1016/j.matpr.2022.04.812 ↗
55. 10.1080/15440478.2023.218126410.1080/15440478.2023.2181264 ↗
56. 10.1016/j.biotri.2019.10011310.1016/j.biotri.2019.100113 ↗
57. 10.1007/s12221-023-00020-210.1007/s12221-023-00020-2 ↗
58. 10.1007/s10570-023-05438-810.1007/s10570-023-05438-8 ↗
59. 10.1002/app.4715410.1002/app.47154 ↗
60. 10.1016/j.matpr.2021.04.59410.1016/j.matpr.2021.04.594 ↗
61. 10.1002/pol.1969.16007101210.1002/pol.1969.160071012 ↗
62. Tiwari N, Shaikh AA. Hybridization of carbon fiber composites with graphene nanoplatelets to enhance interfacial bonding and thermomechanical properties for shape memory applications. Polym Technol Mater 2022; 61: 161–175.
63. 10.1016/j.carbpol.2019.04.06310.1016/j.carbpol.2019.04.063 ↗
64. 10.1177/073168441664287710.1177/0731684416642877 ↗
65. 10.1002/app.4715410.1002/app.47154 ↗
66. 10.1007/s12649-021-01445-710.1007/s12649-021-01445-7 ↗