journal article·2025-12

Characterization of 3D printable Polyethylene Terephthalate Glycol composite filament reinforced with agricultural waste derived from pineapple plant

Jitendra Kumar, Vishal Mishra, Avinash Kumar, Sushant Negi

Publisher page

Abstract

The aim of the current research is to develop a 3D printable PETG composite filament reinforced with pineapple fiber particulate (PALF-P). These filaments were produced using an extrusion technique, incorporating varying weight percentages (1.5%, 2.5%, 5%, and 7.5%) of PALF particles treated with a 5% NaOH chemical solution. Analytical techniques like Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Diffraction (XRD) evaluated the impact of this treatment. A comprehensive study of the resulting composite filaments’ mechanical and physical attributes revealed improved cohesion between the PETG matrix and PALF particles, enhancing the overall properties. Specifically, the incorporation of 5 wt % PALF particles showed the highest ultimate tensile strength (53.54 ± 2.7 MPa), Young’s modulus (1443 ± 72.22 MPa), and load-bearing capacity (104.97 ± 5.25 N). In contrast, 2.5% of particles had the least noticeable effect on mechanical properties. Moreover, the developed sustainable composite filament showed significant promise in advancing bio-composites through additive manufacturing, potentially contributing to sustainable manufacturing practices.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Innovations in Concrete and Construction Materials · Advanced Cellulose Research Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

National Institute of Technology Silchar

References (40)

Show source-provided references
1. 10.1002/app.5146510.1002/app.51465 ↗
2. 10.1177/073168441454678210.1177/0731684414546782 ↗
3. Saha A, Kumar S, Zindani D, et al. Micro-mechanical analysis of the pineapple-reinforced polymeric composite by the inclusion of pineapple leaf particulates. Proc Inst Mech Eng Part L 2021; 235: 1112–1127.
4. 10.1016/j.jclepro.2021.12806810.1016/j.jclepro.2021.128068 ↗
5. 10.1007/s10965-021-02435-y10.1007/s10965-021-02435-y ↗
6. Kumar A, Sharma AK, Yadav RK, et al. Government of India, Ministry of Agriculture and Framers Welfare. Agricultural statistics at a glance 2022. (accessed January 10, 2024), 2023. https://desagri.gov.in/wp-content/uploads/2023/05/Agricultural-Statistics-at-a-Glance-2022.pdf.
7. 10.1016/j.ijadhadh.2021.10282310.1016/j.ijadhadh.2021.102823 ↗
8. 10.1177/089270571880553510.1177/0892705718805535 ↗
9. 10.1177/089270572094537110.1177/0892705720945371 ↗
10. 10.3390/fib1007005610.3390/fib10070056 ↗
11. 10.1088/1757-899X/290/1/01203010.1088/1757-899X/290/1/012030 ↗
12. 10.1016/j.compstruct.2018.06.06810.1016/j.compstruct.2018.06.068 ↗
13. 10.1016/j.jmrt.2020.01.05810.1016/j.jmrt.2020.01.058 ↗
14. 10.1016/j.matchemphys.2022.12698810.1016/j.matchemphys.2022.126988 ↗
15. 10.1016/j.matchemphys.2024.12893710.1016/j.matchemphys.2024.128937 ↗
16. 10.1177/073168441880730010.1177/0731684418807300 ↗
17. Sheet TD. SKYGREEN PETG SK Chemicals - Polyethylene Terephthalate Glycol Comonomer 2007 (accessed January 10 2024) https://petropackaging.com/wp-content/uploads/2014/04/PETG-S2008.pdf
18. 10.1021/acsomega.6b0017510.1021/acsomega.6b00175 ↗
19. 10.1002/pc.2725610.1002/pc.27256 ↗
20. Mahakur VK, Bhowmik S, Patowari PK, et al. Effect of alkaline treatment on physical, mechanical, and thermal characteristics of jute filler reinforced epoxy composites. J Vinyl Addit Technol 2022; 29: 1–13.
21. 10.1038/s41598-017-17713-310.1038/s41598-017-17713-3 ↗
22. 10.4236/jtst.2021.7401310.4236/jtst.2021.74013 ↗
23. 10.1016/j.msea.2012.05.10910.1016/j.msea.2012.05.109 ↗
24. 10.1002/pc.2761610.1002/pc.27616 ↗
25. Kumar J, Mishra V, Negi S. An overview of research on FFF based additive manufacturing of polymer composite. In: Sudarshan TS, Sharma AK, Misra RD (eds) Recent advancements in mechanical engineering. Singapore: Springer Nature Singapore, 2024, 215–227.
26. 10.1016/j.matchemphys.2023.12831710.1016/j.matchemphys.2023.128317 ↗
27. 10.1177/0731684423122568610.1177/07316844231225686 ↗
28. 10.3390/molecules2509215810.3390/molecules25092158 ↗
29. 10.1016/j.jcomc.2022.10024310.1016/j.jcomc.2022.100243 ↗
30. 10.1016/j.matlet.2023.13549310.1016/j.matlet.2023.135493 ↗
31. 10.1002/pc.2616310.1002/pc.26163 ↗
32. 10.1007/s10924-019-01544-610.1007/s10924-019-01544-6 ↗
33. 10.1016/j.wasman.2017.07.04410.1016/j.wasman.2017.07.044 ↗
34. 10.1007/s10965-023-03742-210.1007/s10965-023-03742-2 ↗
35. 10.1016/j.jmrt.2022.04.07610.1016/j.jmrt.2022.04.076 ↗
36. 10.1021/acssuschemeng.3c0268510.1021/acssuschemeng.3c02685 ↗
37. 10.1016/j.coco.2020.04.00210.1016/j.coco.2020.04.002 ↗
38. 10.1016/j.rineng.2022.10084210.1016/j.rineng.2022.100842 ↗
39. Mittal M, Chaudhary R. Experimental study on the water absorption and surface characteristics of alkali treated pineapple leaf fibre and coconut husk fibre thermogravimetric analysis of natural fiber view project experimental study on the water absorption and surface characteri. Int J Appl Eng Res 2018; 13: 12237–12243.
40. 10.3390/POLYM1204078210.3390/POLYM12040782 ↗