journal article·2025-05Open access

Three-dimensional printing with waste acrylonitrile butadiene styrene: Processing and characterization

Vishal Mishra, Sushant Negi, Simanchal Kar

Abstract

Three-dimensional (3D) printing of waste plastic such as acrylonitrile butadiene styrene (ABS) is challenging because multiple heating cycles and irregular cooling cause accumulation of stress in 3D-printed structures, which significantly affects mesostructured and fiber-to-fiber bond strength. Hence, this study demonstrates the ability to print high-quality parts via 3D printing using ABS waste. The different weight proportions (100, 90/10, 80/20, 70/30, 60/40, 50/50) of recycled ABS (RABS)/virgin ABS (VABS) are selected for experimentation. It is found that increasing VABS content in RABS significantly improved the physical properties of samples. Due to VABS blending in RABS, the average enhancement in flexural strength (Sf), flex modulus (Ef), and work of fracture (WOF) are 11.49%, 5.45%, and 17.31%, respectively, when compared with 100% RABS samples. Similarly, the average increase in Young’s modulus (E), tensile strength at yield (Ty), and ultimate tensile strength (UTS) are 7.71%, 5.19%, and 3.51%, respectively. The samples printed with 50% RABS/50% VABS blends show superior mechanical properties than others, also the properties of 90% RABS/10% VABS and 80% RABS/20% VABS are very close to 100% VABS samples. Hence, this study provides unique opportunities for the sustainable use of waste ABS using 3D printing technology.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · 3D Printing in Biomedical Research · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

FMS Lab, National Institute of Technology Silchar, Silchar, India

References (40)

Show source-provided references
1. 10.1016/j.jclepro.2021.12982710.1016/j.jclepro.2021.129827 ↗
2. 10.1007/s10163-020-01106-210.1007/s10163-020-01106-2 ↗
3. 10.1016/j.wasman.2020.09.04910.1016/j.wasman.2020.09.049 ↗
4. 10.1016/j.addma.2021.10251810.1016/j.addma.2021.102518 ↗
5. 10.3390/polym1419415310.3390/polym14194153 ↗
6. 10.1016/j.resconrec.2021.10577610.1016/j.resconrec.2021.105776 ↗
7. 10.1098/rstb.2008.031110.1098/rstb.2008.0311 ↗
8. 10.1016/j.polymertesting.2023.10796910.1016/j.polymertesting.2023.107969 ↗
9. 10.1016/j.compositesb.2023.11058110.1016/j.compositesb.2023.110581 ↗
10. 10.1007/s42452-023-05344-510.1007/s42452-023-05344-5 ↗
11. 10.1007/s10163-023-01653-410.1007/s10163-023-01653-4 ↗
12. 10.3390/bioengineering909043210.3390/bioengineering9090432 ↗
13. 10.1002/biot.20220052110.1002/biot.202200521 ↗
14. 10.1002/pol.2019026110.1002/pol.20190261 ↗
15. 10.1108/RPJ-10-2022-036110.1108/RPJ-10-2022-0361 ↗
16. 10.1002/pen.2633010.1002/pen.26330 ↗
17. 10.1016/j.techfore.2015.07.02310.1016/j.techfore.2015.07.023 ↗
18. 10.1108/1355254131130297810.1108/13552541311302978 ↗
19. 10.1177/0892705722110285710.1177/08927057221102857 ↗
20. Mishra V, Negi S, Kar S. Additive manufacturing : an emerging tool to fabricate bioinspired structures. In: Sudarshan TS, Pandey KM, Misra RD, et al. (eds). Recent Advancements in Mechanical Engineering, ICRAME 2021. Springer Singapore, 2021; pp. 297–312.
21. 10.3390/recycling304005710.3390/recycling3040057 ↗
22. 10.1007/s11665-022-06657-z10.1007/s11665-022-06657-z ↗
23. 10.1016/j.promfg.2017.09.15110.1016/j.promfg.2017.09.151 ↗
24. 10.1007/s40964-018-00072-410.1007/s40964-018-00072-4 ↗
25. 10.3390/app1116733810.3390/app11167338 ↗
26. 10.1177/2634983321100006310.1177/26349833211000063 ↗
27. 10.1016/j.addma.2018.03.00710.1016/j.addma.2018.03.007 ↗
28. 10.1016/j.jclepro.2020.12368910.1016/j.jclepro.2020.123689 ↗
29. 10.3390/ma1402046610.3390/ma14020466 ↗
30. 10.1108/RPJ-03-2017-004210.1108/RPJ-03-2017-0042 ↗
31. 10.1177/089270572092513510.1177/0892705720925135 ↗
32. 10.1021/acssuschemeng.8b0228310.1021/acssuschemeng.8b02283 ↗
33. 10.1177/089270571986462810.1177/0892705719864628 ↗
34. 10.1002/app.1083310.1002/app.10833 ↗
35. 10.1088/1757-899X/310/1/01210310.1088/1757-899X/310/1/012103 ↗
36. 10.3390/polym1102034710.3390/polym11020347 ↗
37. 10.1002/mame.20190010710.1002/mame.201900107 ↗
38. Mohammed MI, Das A, Gomez-Kervin E, et al. Ecoprinting: investigating the use of 100% recycled acrylonitrile butadiene styrene (ABS) for additive manufacturing. In: Solid free fabr 2017 proc 28th annu int solid free fabr symp - an addit manuf conf SFF 2017 532–542, 2020.
39. 10.1016/j.polymertesting.2021.10740510.1016/j.polymertesting.2021.107405 ↗
40. 10.1007/s11668-014-9803-910.1007/s11668-014-9803-9 ↗