journal article·2022-01

Improvement of interface anchoring by ultrasonic vibration for adhesively bonded CFRP/Al joints

Hui Wang, Xuetong Tong, Wei Ji, Yizhe Chen, Lin Hua, Min Wu

Publisher page

Abstract

Adhesively bonded carbon fiber reinforced polymer (CFRP)/Al joints have been widely used in engineering field. However, the bonding strength still needs to be improved. In this study, ultrasonic vibration was applied during the adhesive bonding to promote the micromechanical anchoring at the interface of CFRP/Al joints. Ultrasonic vibration was exerted on the CFRP laminate to transmit the vibration to the adhesive bonding area once the joint was assembled. The strength and the strength consistency of the joints were increased by 45% and 50%, respectively. Scanning electron microscope (SEM) and energy dispersive spectrometer (EDS) results showed that the ultrasonic vibration promoted the filling of the adhesive into the microstructures of the adherends and achieved a more compact bonding. Viscosity and contact angle of the adhesive were measured, and both of them were decreased greatly under the ultrasonic vibration, indicating that the ultrasonic vibration can increase the fluidity of the adhesive and force the wetting between the materials. Ultrasonic capillary experiment was then conducted. The adhesive in the capillary tube was prompted to rise obviously, and the meniscus was inverted with ultrasonic vibration, showing that the ultrasonic vibration produced a driving effect on filling of the adhesive in the microstructures. Therefore, the joints exhibited improved bonding strength owing to the enhanced micromechanical anchoring and physical adsorption at the bonding interface. This study is of great significance for understanding and optimization of the ultrasonic vibration strengthened adhesive bonding.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Advanced ceramic materials synthesis · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Hubei Key Laboratory of Advanced Technology for Automotive Components, Wuhan University of Technology, Wuhan, China

Hubei Collaborative Innovation Center for Automotive Components Technology, Wuhan, China

Hubei Research Center for New Energy & Intelligent Connected Vehicle, Wuhan University of Technology, Wuhan, China

Funding

Natural Science Foundation Council of China · 111 Project · Innovative Research Team Development Program of Ministry of Education of China · Natural Science Foundation of Hubei Province

References (17)

Show source-provided references
1. 10.1016/j.ijadhadh.2016.06.00710.1016/j.ijadhadh.2016.06.007 ↗
2. 10.1016/j.compositesa.2017.06.00710.1016/j.compositesa.2017.06.007 ↗
3. 10.1016/s0924-0136(99)00361-110.1016/s0924-0136(99)00361-1 ↗
4. 10.1016/j.ijadhadh.2010.05.00610.1016/j.ijadhadh.2010.05.006 ↗
5. 10.1121/1.203357410.1121/1.2033574 ↗
6. 10.1016/j.compositesa.2011.12.00610.1016/j.compositesa.2011.12.006 ↗
7. 10.1016/j.matdes.2019.10805310.1016/j.matdes.2019.108053 ↗
8. 10.1080/13621718.2018.148359810.1080/13621718.2018.1483598 ↗
9. 10.1179/174329308x27174210.1179/174329308x271742 ↗
10. 10.1016/j.ijadhadh.2009.10.00210.1016/j.ijadhadh.2009.10.002 ↗
11. 10.1016/j.compstruct.2019.11132510.1016/j.compstruct.2019.111325 ↗
12. 10.1080/01694243.2019.167831110.1080/01694243.2019.1678311 ↗
13. 10.7567/1347-4065/ab4dfa10.7567/1347-4065/ab4dfa ↗
14. 10.3390/polym1204094710.3390/polym12040947 ↗
15. 10.1016/j.ultsonch.2015.04.02910.1016/j.ultsonch.2015.04.029 ↗
16. 10.29391/2019.98.01710.29391/2019.98.017 ↗
17. 10.1515/polyeng-2019-021710.1515/polyeng-2019-0217 ↗