journal article·2018-10

Enhanced lightweight design by composites – Results of the EU project ENLIGHT

Dirk Mayer, Thilo Bein, Hendrik Buff, Benedict Götz, Oliver Schwarzhaupt, Dominik Spancken

Publisher page

Abstract

Over recent decades, cars have become larger and heavier with every new generation. The main drivers of such a weight increase have been the improved safety and comfort requirements. Decades of R&D investments to tackle this tendency have resulted in a substantial increase in the weight-specific performance of components and assemblies in terms of cost, strength and stiffness. However, the need for weight reduction in future electric vehicles, without unduly compromising performance and safety, is even stronger since additional weight translates into either reduced driving range or in larger, heavier and more expensive batteries. Within this context, the European Green Vehicle project ENLIGHT developed highly innovative lightweight material technologies for application in structural vehicle parts of future volume produced electric vehicles. Among others, ENLIGHT developed thermoplastic matrix composite and associated manufacturing technologies to a stage that they were applicable at least in medium volume production. The material development was complemented by investigating the required manufacturing and assembly technologies as well. In this paper, a summary of the major results obtained during the four-year project year is presented. A special focus is given to a semi-active composite control arm with significant reduced weight but enhanced NVH properties.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aeroelasticity and Vibration Control · Composite Structure Analysis and Optimization · Mechanical Engineering and Vibrations Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Fraunhofer Institute for Structural Durability and System Reliability, Darmstadt, Germany

Funding

European Commission

References (28)

Show source-provided references
1. N.N: SEAM – Safe efficient advanced materials, www.seam-cluster.eu (accessed 27 September 2015).
2. N.N: ALIVE – Advanced high volume affordable lightweighting for future electric vehicles, www.project-alive.eu (accessed 27 September 2015).
3. N.N.: ELVA – Advanced electric vehicle architectures, www.elva-project.eu (accessed 27 September 2015).
4. 10.1016/j.trpro.2016.05.17310.1016/j.trpro.2016.05.173 ↗
5. 10.1016/j.ymssp.2015.08.02910.1016/j.ymssp.2015.08.029 ↗
6. 10.1016/j.compositesb.2016.01.02710.1016/j.compositesb.2016.01.027 ↗
7. Salloum R, Töws P, Schmidt S, et al. Vibration damping of a composite control arm through embedded piezoceramic patches shunted with a negative capacitance. In: Smarte strukturen und Systeme, Tagungsband des 4SMARTS Symposiums , Darmstadt, Germany, 2016, pp.182–193. De Gruyter Oldenbourg.10.1515/9783110469240-017 ↗
8. Bassan D. Scrutinizing manufacturing aspects for innovative lightweight composite components production: ENLIGHT project results presented at The Global Automotive Lightweight Materials (GALM) conference , Birmingham, UK, 26–28 April 2016. Available at: https://www.lbcg.com/media/downloads/events/545/daniele-bassan-fca.10137.pdf
9. 10.1007/978-3-319-32098-4_2910.1007/978-3-319-32098-4_29 ↗
10. Kosaka F, Mizuno H, Inoue T, et al. Road noise sensitivity analysis with respect to suspension geometry. In: INTER-NOISE and NOISE-CON congress and conference proceedings 249 , Melbourne, Australia, 16-19 November, 2014, pp.2127–2136, Institute of Noise Control Engineering.
11. 10.2514/3.2076310.2514/3.20763 ↗
12. 10.1016/j.jsv.2010.04.00310.1016/j.jsv.2010.04.003 ↗
13. 10.3390/app705049410.3390/app7050494 ↗
14. 10.1088/0964-1726/16/4/03810.1088/0964-1726/16/4/038 ↗
15. 10.2514/3.979210.2514/3.9792 ↗
16. Rajek M · Diagnostyka · 2014 · 15
17. Delpero T, Bergamini A, Ermanni P. Concurrent design of adaptively damped structures. In: International conference on adaptive structures and technologies (ICAST) , The Hague, Netherlands, 6–8 October 2014, Curran, 1–12. ISBN: 1634398084, 9781634398084.
18. Hansen J, Vizzini A. Fatigue response of a host structure with interlaced embedded devices. In: Thirty-eighth structures, structural dynamics, and materials conference , Kissimmee, FL, USA, 7–10 April 1997. Reston, VA: American Institute of Aeronautics and Astronautics: 1-810.2514/6.1997-1346 ↗
19. 10.1016/j.ijfatigue.2004.09.01210.1016/j.ijfatigue.2004.09.012 ↗
20. Den Hartog JP. · 1956
21. 10.1016/0022-460X(91)90762-910.1016/0022-460X(91)90762-9 ↗
22. Salloum R. Optimization of shunt damped composite structured using negative capacitances . PhD Thesis, Technische Universität Darmstadt, Germany, 2016.
23. Salloum R, Heuss O, Mayer D. Design of smart lightweight structures: simultaneous optimization of mechanical and shunt circuit parameters. In: International Conference on Adaptive Structures and Technologies (ICAST) , The Hague, Netherlands, 2014, pp.1–12.
24. Töws P. Konstruktion und Herstellung eines Leichtbauquerlenkers aus einem Kohlenstofffaser-Epoxid-Verbund . Master Thesis, Hochschule Darmstadt, Germany, 2014.
25. Salloum R, Mayer D. Arrangement and method for influencing and/or detecting a dynamic or static property of a support structure. Patent application WO2017037007 A1, 2015.
26. Lilov M, Siebel T. An electromechanical impedance-based mobile system for structural health monitoring and reliability check of bonded piezoelectric sensors. In: Smart Intelligent Aircraft Structures (SARISTU ), 2016, pp.529–43. Cham: Springer.10.1007/978-3-319-22413-8_23 ↗
27. 10.1088/0964-1726/13/1/02410.1088/0964-1726/13/1/024 ↗
28. 10.1177/1045389X1452385810.1177/1045389X14523858 ↗