Experimental investigation of a novel connection for pultruded composites: Hybrid bolt-tooth connection
Source abstract
Abstract
Due to the insufficient connection efficiency of the bolted connection of pultruded composites, a novel composite connection technique called hybrid bolt-tooth connection was proposed. The paper presents a series of experiments studying the bearing capacity and the failure mode of the hybrid bolt-tooth connection by comparing with the pure bolted connection. Furthermore, the influences of the depth, the length and the number of the teeth on the connector’s failure mode and bearing capacity were studied. The results indicate that compared with the pure bolted connection, the hybrid bolt-tooth connection has a higher connection efficiency thanks to the load sharing of the teeth. The number, the depth and the length of the teeth exhibit a significant influence on the bearing capacity and failure modes. With the increase of the number and the length of the teeth, the bearing capacity is improved effectively; the bearing capacity of the connection with shallow teeth is significantly higher than that with deep teeth. Therefore, the hybrid bolt-tooth connection is an effective jointing method and has a good application prospect.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Mechanical stress and fatigue analysis · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Field Engineering, PLA Univ. of Sci. & Tech., Nanjing, China
Institute of Defense engineering, PLA Univ. of Sci. & Tech., Nanjing, China
The First Research Division, General Equipment Department of the PLA, Wuxi, China
Institute of Logistics engineering of PLA, Chongqing, China
References (29)
Show source-provided references
1. 10.1016/S0263-8223(00)00157-410.1016/S0263-8223(00)00157-4 ↗
2. Starikov R and Sch ONJ. Experimental investigation of fatigue behaviour in composite bolted joints. Licentiate Thesis (Report 99-24), Department of Aeronautics, The Royal Institute of Technology, Stockholm, Sweden 1999.
3. 10.1080/0021846960800995010.1080/00218469608009950 ↗
4. 10.1016/j.compstruct.2010.03.00510.1016/j.compstruct.2010.03.005 ↗
5. Fei L. Research on new type of composite connection and application in the truss, Vol. PhD thesis, PLA University of Science and Technology, Nanjing, 2012.
6. Deng AZ, Zhao QL, Li F, et al. Research on bearing capacity of single tooth to composite pre-tightened teeth connection. J Reinf Plast Compos 2013; 32(21): 1603–1613.10.1177/0731684413492575 ↗
7. 10.1016/j.compstruct.2013.09.05810.1016/j.compstruct.2013.09.058 ↗
8. 10.1061/(ASCE)1090-0268(2007)11:1(99)10.1061/(ASCE)1090-0268(2007)11:1(99) ↗
9. 10.2749/10168660477796370210.2749/101686604777963702 ↗
10. ASTM. D5961/D5961M – 13 Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates, 2013.
11. 10.1016/j.compstruct.2005.02.01610.1016/j.compstruct.2005.02.016 ↗
12. 10.1016/j.compstruct.2007.10.00310.1016/j.compstruct.2007.10.003 ↗
13. Hart-Smith LJ. Mechanically-fastened joints for advanced composites—Phenomenological considerations and simple analyses. In: Edward ML, Donald WO and John JB (eds) Fibrous Composites in Structural Design . Springer-Verlag, 1980, pp.543–574.10.1007/978-1-4684-1033-4_32 ↗
14. 10.1016/S0263-8223(01)00005-810.1016/S0263-8223(01)00005-8 ↗
15. 10.1016/j.compstruct.2007.06.00810.1016/j.compstruct.2007.06.008 ↗
16. 10.1016/j.compstruct.2010.09.01610.1016/j.compstruct.2010.09.016 ↗
17. 10.1177/002199830809199710.1177/0021998308091997 ↗
18. 10.1016/0010-4361(93)90266-B10.1016/0010-4361(93)90266-B ↗
19. 10.1016/0010-4361(93)90267-C10.1016/0010-4361(93)90267-C ↗
20. 10.1016/1359-8368(95)00021-610.1016/1359-8368(95)00021-6 ↗
21. 10.1016/j.compositesa.2007.11.00910.1016/j.compositesa.2007.11.009 ↗
22. 10.1016/j.compositesa.2007.08.01610.1016/j.compositesa.2007.08.016 ↗
23. 10.1016/j.compositesa.2006.05.00410.1016/j.compositesa.2006.05.004 ↗
24. 10.1016/j.compositesa.2009.11.00310.1016/j.compositesa.2009.11.003 ↗
25. 10.1016/j.compscitech.2008.12.00510.1016/j.compscitech.2008.12.005 ↗
26. 10.1016/j.ijadhadh.2010.01.00510.1016/j.ijadhadh.2010.01.005 ↗
27. Yu M · Acta Mater Compos Sin · 2011 · 4 · 39
28. 10.1007/978-3-642-01169-6_2710.1007/978-3-642-01169-6_27 ↗
29. 10.1016/0010-4361(82)90168-910.1016/0010-4361(82)90168-9 ↗