journal article·2025-04

Reliability analysis and optimization design of hydrogen storage composite pressure vessel with hybrid random-fuzzy uncertainties

Wenbo Li, Hong Lv, Lijun Zhang, Pengfei He, Cunman Zhang

Publisher page

Abstract

In this study, a progressive failure model for hydrogen storage composite pressure vessel (CPV) burst is established. The burst pressure and progressive damage behavior of the CPV are analyzed. Besides, kriging and response surface (RS) surrogate models for CPV burst are established. The verification and the comparative analysis of the surrogate models are carried out. Then, the reliability of the CPV is analyzed with hybrid random-fuzzy uncertainties, and the influence of longitudinal tensile strength, hoop layer thickness, and helical layer thickness on the hybrid reliability is explored. Finally, a unified reliability index is established with hybrid random-fuzzy uncertainties, and the modified particle swarm optimization (PSO) algorithm is applied to carry out reliability-based optimization design. The minimum weight of the composite shell is set as the objective, and the reliability of the CPV with hybrid random-fuzzy uncertainties is set as the constraint. The results show that the hoop layer of the CPV is the main load-bearing structure. The kriging and RS surrogate models are effectiveness to surrogate the burst pressure of the CPV, and the RS model is simpler and more computationally efficient than kriging model, which is more suitable for reliability analysis and optimization design. Under the condition of hybrid random-fuzzy uncertainties, the reliability of the hydrogen storage CPV exhibits fuzzy uncertainty, and there is a possibility of reliability equal to 0 under the low λ -cut level, making it difficult to meet reliability requirements. Increasing the longitudinal tensile strength, the hoop layer thickness and the helical layer thickness can improve the reliability of the hydrogen storage CPV. Furthermore, the optimization method proposed in this study improves its reliability from 0.7043 to 1. This study establishes reliability analysis and optimization design methods for hydrogen storage CPV with hybrid random-fuzzy uncertainties, which contributes to further improvement on the safety of CPV.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Probabilistic and Robust Engineering Design · Fatigue and fracture mechanics · Structural Integrity and Reliability Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Tongji University

Funding

National Key R&D Program of China

References (84)

Show source-provided references
1. 10.1016/j.enconman.2007.08.01510.1016/j.enconman.2007.08.015 ↗
2. 10.1016/j.ijhydene.2021.11.14910.1016/j.ijhydene.2021.11.149 ↗
3. 10.1016/j.ijhydene.2022.02.11210.1016/j.ijhydene.2022.02.112 ↗
4. 10.1016/j.ijhydene.2022.10.05310.1016/j.ijhydene.2022.10.053 ↗
5. 10.1016/j.ijhydene.2019.04.06810.1016/j.ijhydene.2019.04.068 ↗
6. 10.1016/j.ijhydene.2019.03.04110.1016/j.ijhydene.2019.03.041 ↗
7. 10.1016/j.ijhydene.2016.03.17810.1016/j.ijhydene.2016.03.178 ↗
8. 10.1016/j.ijhydene.2019.08.00110.1016/j.ijhydene.2019.08.001 ↗
9. 10.1177/0731684422113274410.1177/07316844221132744 ↗
10. 10.1016/j.compstruct.2020.11191510.1016/j.compstruct.2020.111915 ↗
11. 10.1016/j.ijhydene.2022.09.02810.1016/j.ijhydene.2022.09.028 ↗
12. 10.1016/j.ijhydene.2009.05.00810.1016/j.ijhydene.2009.05.008 ↗
13. 10.4028/www.scientific.net/AMR.488-489.35810.4028/www.scientific.net/AMR.488-489.358 ↗
14. 10.1016/j.compstruct.2015.05.03610.1016/j.compstruct.2015.05.036 ↗
15. 10.1016/j.ijhydene.2020.06.26910.1016/j.ijhydene.2020.06.269 ↗
16. 10.1016/j.ijhydene.2012.06.04410.1016/j.ijhydene.2012.06.044 ↗
17. 10.1063/1.501048210.1063/1.5010482 ↗
18. 10.1016/j.ijhydene.2017.08.12310.1016/j.ijhydene.2017.08.123 ↗
19. 10.1016/S0263-8223(99)00133-610.1016/S0263-8223(99)00133-6 ↗
20. 10.1016/j.compositesb.2004.11.00310.1016/j.compositesb.2004.11.003 ↗
21. 10.1115/1.301382210.1115/1.3013822 ↗
22. 10.1016/j.compstruct.2020.11338710.1016/j.compstruct.2020.113387 ↗
23. 10.1016/j.compositesb.2020.10855010.1016/j.compositesb.2020.108550 ↗
24. 10.1016/j.compstruct.2015.08.10710.1016/j.compstruct.2015.08.107 ↗
25. 10.1016/j.ijhydene.2015.06.12110.1016/j.ijhydene.2015.06.121 ↗
26. 10.1177/002199831987058810.1177/0021998319870588 ↗
27. 10.1016/j.compositesb.2014.10.03010.1016/j.compositesb.2014.10.030 ↗
28. 10.1016/j.firesaf.2018.12.00410.1016/j.firesaf.2018.12.004 ↗
29. 10.1016/j.compstruct.2017.11.06810.1016/j.compstruct.2017.11.068 ↗
30. 10.1016/j.ijhydene.2015.06.15610.1016/j.ijhydene.2015.06.156 ↗
31. 10.1016/j.ijhydene.2019.03.08810.1016/j.ijhydene.2019.03.088 ↗
32. 10.1016/j.compstruct.2018.02.01110.1016/j.compstruct.2018.02.011 ↗
33. 10.1016/j.compstruct.2019.11175510.1016/j.compstruct.2019.111755 ↗
34. 10.1016/j.compstruct.2015.07.05910.1016/j.compstruct.2015.07.059 ↗
35. Bertin M Villalonga S Vernede M et al. Mechanical behaviour of 700 bar type IV high pressure vessel: comparison between simulations and experiments through Osirhys IV project. In: Proceedings of 15th European conference on composite materials Venice Italy 24–28 June 2012: The University of Naples “Parthenope. paper no.8. Naples.
36. 10.1016/S1359-8368(03)00021-010.1016/S1359-8368(03)00021-0 ↗
37. 10.1007/s11668-019-00581-610.1007/s11668-019-00581-6 ↗
38. 10.1088/1742-6596/1260/11/11200710.1088/1742-6596/1260/11/112007 ↗
39. 10.1007/s10443-017-9665-x10.1007/s10443-017-9665-x ↗
40. 10.1016/j.compstruct.2011.05.02010.1016/j.compstruct.2011.05.020 ↗
41. 10.1016/j.jlp.2010.02.00210.1016/j.jlp.2010.02.002 ↗
42. 10.1007/s11668-019-00616-y10.1007/s11668-019-00616-y ↗
43. 10.1007/s10443-012-9305-410.1007/s10443-012-9305-4 ↗
44. 10.1016/j.compstruct.2012.01.01810.1016/j.compstruct.2012.01.018 ↗
45. 10.1016/j.commatsci.2009.07.01510.1016/j.commatsci.2009.07.015 ↗
46. 10.1016/j.ijhydene.2017.03.03210.1016/j.ijhydene.2017.03.032 ↗
47. 10.1007/s12206-011-0721-410.1007/s12206-011-0721-4 ↗
48. 10.1016/j.cja.2013.02.01110.1016/j.cja.2013.02.011 ↗
49. 10.1016/S0894-9166(13)60043-910.1016/S0894-9166(13)60043-9 ↗
50. 10.15632/jtam-pl.52.4.101910.15632/jtam-pl.52.4.1019 ↗
51. 10.4028/www.scientific.net/AMR.945-949.115510.4028/www.scientific.net/AMR.945-949.1155 ↗
52. 10.1016/j.cja.2012.12.02210.1016/j.cja.2012.12.022 ↗
53. Aydin L, Aydin O, Artem HS, et al. Design of dimensionally stable composites using efficient global optimization method. P I Mech Eng L-J Mat 2019; 233: 156–168.
54. 10.1177/0021998321104768910.1177/00219983211047689 ↗
55. 10.1007/s11831-021-09699-z10.1007/s11831-021-09699-z ↗
56. 10.1016/j.compositesb.2015.09.02510.1016/j.compositesb.2015.09.025 ↗
57. 10.1007/s00158-003-0353-010.1007/s00158-003-0353-0 ↗
58. 10.1016/j.mtcomm.2022.10362710.1016/j.mtcomm.2022.103627 ↗
59. Monticeli FM, Neves RM, Ornaghi HLJr, et al. Prediction of bending properties for 3D-printed carbon fibre/epoxy composites with several processing parameters using ANN and statistical methods. Polym Bull (Heidelberg, Ger) 2022; 14: 3668.
60. 10.1002/pc.2657810.1002/pc.26578 ↗
61. 10.1016/j.measurement.2014.05.02510.1016/j.measurement.2014.05.025 ↗
62. 10.1080/15397734.2022.215983610.1080/15397734.2022.2159836 ↗
63. 10.1016/j.ress.2017.06.02810.1016/j.ress.2017.06.028 ↗
64. 10.1016/j.compstruct.2020.11278210.1016/j.compstruct.2020.112782 ↗
65. 10.1016/j.compstruct.2021.11468210.1016/j.compstruct.2021.114682 ↗
66. 10.1007/s10338-022-00366-910.1007/s10338-022-00366-9 ↗
67. 10.1016/j.compstruct.2016.04.01310.1016/j.compstruct.2016.04.013 ↗
68. 10.1016/j.compstruct.2020.11282110.1016/j.compstruct.2020.112821 ↗
69. 10.1007/s00158-022-03227-810.1007/s00158-022-03227-8 ↗
70. 10.1016/j.compstruct.2015.12.03110.1016/j.compstruct.2015.12.031 ↗
71. 10.1016/j.compstruct.2017.08.06510.1016/j.compstruct.2017.08.065 ↗
72. 10.1016/j.compstruct.2018.07.05310.1016/j.compstruct.2018.07.053 ↗
73. 10.1016/j.dt.2020.02.02010.1016/j.dt.2020.02.020 ↗
74. 10.1016/j.compositesb.2021.10922410.1016/j.compositesb.2021.109224 ↗
75. Kang K, Zu L, Wu Q, et al. Research on burst strength and fatigue performance of carbon fiber wound composite cylinder with aluminum alloy liner. Comput Sci Eng 2022; 9: 35–43.
76. ISO 11515. Gas cylinders — refillable composite reinforced tubes of water capacity between 450 L and 3000 L — design, construction and testing. 2013.
77. 10.1177/073168441456022110.1177/0731684414560221 ↗
78. 10.1016/j.ijhydene.2015.05.06110.1016/j.ijhydene.2015.05.061 ↗
79. Bachoc F. Parametric estimation of covariance function in Gaussian-process based kriging models. In: Application to uncertainty quantification for computer experiments. Paris: Universit Paris-Diderot-Paris VII, 2013. Ph.D. thesis.
80. 10.18637/jss.v051.i0110.18637/jss.v051.i01 ↗
81. Papilla M. Accuracy of response surface approximations for weight equations based on structural optimization. Gainesville: University of Florida, 2001. Ph.D. thesis.
82. 10.1017/aer.2020.210.1017/aer.2020.2 ↗
83. 10.1016/j.ijhydene.2023.04.31210.1016/j.ijhydene.2023.04.312 ↗
84. 10.1016/j.ymssp.2019.10658910.1016/j.ymssp.2019.106589 ↗