journal article·2024-05

Recycling effects on the bending, rheological, and structural properties of glass fiber-reinforced isotactic polypropylene composites

EO Achukwu, MM Owen, A Danladi, BM Dauda, AZ Romli, Solehuddin B Shuib, US Ishiaku, Akil Md Hazizan

Publisher page

Abstract

In the present work, a combination of virgin polypropylene and E-glass fiber was subjected to ten (10) reprocessing cycles via extrusion and compression molding techniques to mimic recycling and its impacts on the bending properties of the composites. The samples were characterized using Fourier transform infrared (FTIR) spectroscopy, x-ray diffraction (XRD), scanning electron microscopy (SEM), and melt flow index (MFI). The results revealed a gradual depreciation in flexural properties after each reprocessing cycle. The XRD analysis indicated a substantial reduction of peak intensities, degrees of crystallinities, and average crystallite sizes, explaining the lowered flexural properties in addition to a possible reduction in glass fiber lengths (fiber attrition). Melt-processing behavior shows a progressive increase of MFI from 7 to 19.16 g/10 min, confirming the probable damage in molecular weight and loss of complex viscosity. Chemical and structural analysis showed no alteration in the polypropylene major functional groups. It is concluded that the reductions in molecular weight and composites’ properties occurred due to chain scission from recycling effects; hence, glass fiber-reinforced polypropylene composites can be recycled only three (3) times unless it is refreshed by the addition of virgin parts to compensate for the lost property.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer crystallization and properties · Natural Fiber Reinforced Composites · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Polymer and Textile Engineering, Faculty of Engineering, Ahmadu Bello University Zaria, Nigeria

School of Mechanical Engineering, College of Engineering, Universiti Teknologi MARA (UiTM), Shah Alam, Selangor, Malaysia

Department of Industrial Chemistry, Federal University, Lokoja, Nigeria

Centre of Chemical Synthesis and Polymer Technology, Institute of Science, Universiti Teknologi MARA (UiTM), Shah Alam, Malaysia

Faculty of Applied Science, Universiti Teknologi MARA (UiTM), Shah Alam, Malaysia

School of Materials and Mineral Resources Engineering, Universiti Sains Malaysia Engineering Campus, Nibong Tebal, Penang, Malaysia

References (71)

Show source-provided references
1. 10.1002/pen.2418210.1002/pen.24182 ↗
2. 10.1016/j.wasman.2015.08.04210.1016/j.wasman.2015.08.042 ↗
3. 10.1016/j.wasman.2012.11.01810.1016/j.wasman.2012.11.018 ↗
4. 10.1002/app.5358810.1002/app.53588 ↗
5. Karian HG · 2003 · 25
6. 10.1080/17518253.2018.149164510.1080/17518253.2018.1491645 ↗
7. Stephen M · 2019
8. 10.1016/j.conbuildmat.2020.11984510.1016/j.conbuildmat.2020.119845 ↗
9. 10.1002/pc.2686610.1002/pc.26866 ↗
10. 10.1016/j.heliyon.2022.e0872410.1016/j.heliyon.2022.e08724 ↗
11. 10.1186/s40691-018-0148-y10.1186/s40691-018-0148-y ↗
12. 10.1080/0360255090314916910.1080/03602550903149169 ↗
13. 10.1002/pc.2726010.1002/pc.27260 ↗
14. 10.1051/meca/201110410.1051/meca/2011104 ↗
15. 10.1080/15440478.2010.52929910.1080/15440478.2010.529299 ↗
16. 10.5923/j.textile.20120106.0510.5923/j.textile.20120106.05 ↗
17. 10.1177/073168440934332510.1177/0731684409343325 ↗
18. Achukwu EO · Niger J Sci Res · 2015 · 14 · 16
19. 10.1177/1528083722112744110.1177/15280837221127441 ↗
20. 10.1177/2041247922112267610.1177/20412479221122676 ↗
21. 10.1016/j.jaap.2011.10.00310.1016/j.jaap.2011.10.003 ↗
22. Aramide FO · Inter J Compos Mater · 2012 · 2 · 147
23. Ramzan E · J Faculty Eng Technol · 2009 · 16 · 33
24. 10.1177/073168441453079010.1177/0731684414530790 ↗
25. 10.1016/j.wasman.2009.04.00310.1016/j.wasman.2009.04.003 ↗
26. Nafchi HR · Maderas Ciencia Y Tecnología · 2015 · 17 · 45
27. 10.1016/j.compscitech.2014.02.01410.1016/j.compscitech.2014.02.014 ↗
28. 10.1016/j.matdes.2013.02.02710.1016/j.matdes.2013.02.027 ↗
29. 10.1016/j.engfracmech.2006.10.00210.1016/j.engfracmech.2006.10.002 ↗
30. 10.1177/089270571556982310.1177/0892705715569823 ↗
31. 10.1080/03602559.2014.88606610.1080/03602559.2014.886066 ↗
32. 10.1177/089270571561040710.1177/0892705715610407 ↗
33. 10.1016/j.compositesb.2020.10831610.1016/j.compositesb.2020.108316 ↗
34. 10.3139/217.377010.3139/217.3770 ↗
35. 10.1002/pi.247010.1002/pi.2470 ↗
36. 10.1016/j.compscitech.2005.01.00810.1016/j.compscitech.2005.01.008 ↗
37. 10.1177/089270571456311610.1177/0892705714563116 ↗
38. 10.1016/j.compositesa.2008.05.00810.1016/j.compositesa.2008.05.008 ↗
39. 10.1016/j.polymdegradstab.2016.12.00310.1016/j.polymdegradstab.2016.12.003 ↗
40. 10.1016/j.jclepro.2018.12.16010.1016/j.jclepro.2018.12.160 ↗
41. 10.1016/j.polymdegradstab.2008.12.01010.1016/j.polymdegradstab.2008.12.010 ↗
42. 10.1016/j.polymdegradstab.2007.02.01810.1016/j.polymdegradstab.2007.02.018 ↗
43. 10.1016/j.compositesa.2006.02.02010.1016/j.compositesa.2006.02.020 ↗
44. 10.1177/089270570708394910.1177/0892705707083949 ↗
45. 10.32604/jrm.2019.0175910.32604/jrm.2019.01759 ↗
46. 10.3390/polym1207144010.3390/polym12071440 ↗
47. Prachayawarakorn J · Songklanakarin J Sci Technol · 2005 · 27 · 344
48. 10.3390/polym1208162710.3390/polym12081627 ↗
49. 10.1016/j.compositesa.2008.08.00110.1016/j.compositesa.2008.08.001 ↗
50. 10.1016/j.compositesb.2006.10.00410.1016/j.compositesb.2006.10.004 ↗
51. 10.1016/j.polymertesting.2006.03.00810.1016/j.polymertesting.2006.03.008 ↗
52. 10.1016/j.matdes.2004.10.01310.1016/j.matdes.2004.10.013 ↗
53. ASTM · 2010
54. ASTM · 2003
55. ASTM · 2013
56. ASTM · 2008
57. ASTM · 2017
58. 10.1016/j.compositesa.2004.11.00410.1016/j.compositesa.2004.11.004 ↗
59. 10.1002/app.2817510.1002/app.28175 ↗
60. 10.1016/j.polymdegradstab.2011.03.01510.1016/j.polymdegradstab.2011.03.015 ↗
61. 10.1023/A:101798390726010.1023/A:1017983907260 ↗
62. 10.1016/j.jmrt.2019.12.06510.1016/j.jmrt.2019.12.065 ↗
63. 10.1002/mame.20160016610.1002/mame.201600166 ↗
64. 10.1016/j.polymdegradstab.2009.04.01210.1016/j.polymdegradstab.2009.04.012 ↗
65. 10.1016/j.polymer.2004.12.04410.1016/j.polymer.2004.12.044 ↗
66. 10.1016/j.polymer.2005.04.03810.1016/j.polymer.2005.04.038 ↗
67. 10.1016/j.polymer.2005.02.01810.1016/j.polymer.2005.02.018 ↗
68. 10.3390/polym1109145610.3390/polym11091456 ↗
69. 10.1002/pen.2521310.1002/pen.25213 ↗
70. 10.1016/j.fpsl.2019.01.00210.1016/j.fpsl.2019.01.002 ↗
71. 10.1016/j.polymdegradstab.2020.10939010.1016/j.polymdegradstab.2020.109390 ↗