Numerical modelling of the flow in a swelling preform during LCM mould filling
Source abstract
Abstract
Composite industry increasingly uses natural fibres because of their environment-friendly advantages. These natural fibres may swell during the mould filling process when they absorb resin, and this swelling reduces the porosity and permeability of the preform. Hence, computational modelling of the flow in swelling porous media would be useful to model the different mould filling processes with the swelling effect. This paper demonstrates the possibility of using computational fluid dynamics to study the effect of swelling on liquid composite moulding mould filling in isotropic and orthotropic porous media. An empirical relation for local permeability changes is used to model the flow of resin under constant volume flow rate and constant injection pressure conditions. The flow front locations and inlet pressure predicted by the computational fluid dynamics simulations are in good agreement with the experimental data for 1D rectilinear flow case. Further, to capture the flow patterns, two different arrangements employing point injection are considered. It was observed that the volume fraction of resin in swelling porous medium is 6% less than rigid porous medium at any given time. It was also observed that the location of the inlet and outlet has a considerable effect on the flow front advancement.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Composite Material Mechanics · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Engineering and Environment, Northumbria University, Newcastle Upton Tyne, UK
School of Design and Engineering, Thomas Jefferson University, Philadelphia, PA, USA
References (27)
Show source-provided references
1. Wool RP, andKhot SN. Bio-based resins and natural fibers. In: Miracle DB and Donaldson SL (eds) Composites. ▪: ASM International vol. 21, 2001. p. 184–192.10.31399/asm.hb.v21.a0003356 ↗
2. 10.1002/9781118203699.ch310.1002/9781118203699.ch3 ↗
3. 10.1177/002199830403926910.1177/0021998304039269 ↗
4. 10.1016/j.compositesa.2007.08.02310.1016/j.compositesa.2007.08.023 ↗
5. 10.1016/j.matpr.2019.09.21210.1016/j.matpr.2019.09.212 ↗
6. Saad A, Echchelh A, Hattabi M, et al. An optimized control volume/finite element method (CV/FEM) for non-isothermal liquid composite molding (LCM) process. In: Driss Z, Necib B, Zhang H-C (eds) Thermo-mechanics applications and engineering technology. Cham: Springer International Publishing, 2018, pp.81–118.10.1007/978-3-319-70957-4_4 ↗
7. 10.1177/07316844880070030110.1177/073168448800700301 ↗
8. 10.1002/pc.1062310.1002/pc.10623 ↗
9. 10.1002/pen.76031110210.1002/pen.760311102 ↗
10. 10.1177/07316844980170020610.1177/073168449801700206 ↗
11. 10.1002/adv.1993.06012040110.1002/adv.1993.060120401 ↗
12. 10.1177/07316840302761210.1177/073168403027612 ↗
13. 10.1177/002199830303701100410.1177/0021998303037011004 ↗
14. 10.1002/fld.165019070410.1002/fld.1650190704 ↗
15. Masoodi R, Tan H, Pillai KM. Darcy's law–based numerical simulation for modeling 3D liquid absorption into porous wicks. AIChE journal 2011; 57(5): 1132–1143.10.1002/aic.12343 ↗
16. Porto JS, Letzow M, Santos ED, et al. Computational modeling of RTM and LRTM processes applied to complex geometries . ▪: ▪, 2012.10.5380/reterm.v11i1-2.62007 ↗
17. 10.1007/s10443-014-9402-710.1007/s10443-014-9402-7 ↗
18. 10.1177/002199831663180910.1177/0021998316631809 ↗
19. 10.1002/aic.1275910.1002/aic.12759 ↗
20. 10.1177/073168441243862910.1177/0731684412438629 ↗
21. 10.1177/002199831246999210.1177/0021998312469992 ↗
22. Mirnyy V, Clausnitzer V, Diersch HG, Rosati R, Schmidt M, Beruda H. Wicking in absorbent swelling porous materials. In Masoodi R, Pillai KM (eds). Wicking in Porous Materials Traditional and Modern Modeling Approaches . CRC Press. USA. 2012 Oct 26: 161–200.
23. Fluent A. Ansys fluent theory guide . USA: ANSYS Inc., vol. 15317, 2011, pp.724–746.
24. Masoodi R · AIChE J · 2010 · 56 · 225710.1002/aic.12163 ↗
25. Javadi A, Pillai KM, Sabo R. An experimental estimation of liquid absorption coefficient for cellulose nano-fiber films. In: 11th international conference on flow processes in composite materials (FPCM11), Auckland, July 2012, pp. 9–12.
26. Chattopadhyay K, andGuthrie RI. Single phase, two phase, and multiphase flows, and methods to model these flows. treatise on process metallurgy . ▪: Elsevier, 2014, pp.527–553.10.1016/B978-0-08-096984-8.00012-4 ↗
27. 10.1016/j.apm.2011.01.04010.1016/j.apm.2011.01.040 ↗