journal article·2011-02

Thermoplastic polyolefin nanocomposites: effect of mechanical, thermal, and morphological properties

R. Nalini, S. Nagarajan, B.S.R. Reddy

Publisher page

Abstract

The polymer nanocomposites were prepared by melt compounding from polypropylene/thermoplastic elastomer (PP-TPE) with sodium montmorillonite (Na-MMT) and cloisite 20A using maleic anhydride modified PP-grafted maleic anhydride (PP-g-MA) as a compatibilizer. Three different weight percentages (3, 5, and 7 wt%) of nanoclay (Na-MMT or C20A) were used to study the effect on the properties of nanocomposites. The optimized clay composition of 5% was tested by varying the wt% of compatibilizer (5, 10, 15, and 20) to obtain better performance properties of nanocomposites. The excellent improvements in mechanical properties were observed by the incorporation 5 wt% cloisite20A with 5% compatibilizer. TPO nanocomposites show higher melting point and thermal degradation temperature on heat loading. The good thermal stability was confirmed from DSC and TGA. The intercalated/exfoliated phenomenon was indicated by the increase in T g and storage modulus using DMA. Wide angle X-ray scattering (XRD) was employed to study the size and changes in the morphology; it is also provided conclusive evidence for the formation of exfoliated structures.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · Polymer Nanocomposite Synthesis and Irradiation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Central Institute Plastic Engineering and Technology, India

Industrial Chemistry Laboratory, Central Leather Research Institute, India

Industrial Chemistry Laboratory, Central Leather Research Institute, India,

References (16)

Show source-provided references
1. 10.1002/adma.1996008010410.1002/adma.19960080104 ↗
2. 10.1016/j.progpolymsci.2003.08.00210.1016/j.progpolymsci.2003.08.002 ↗
3. 10.1016/j.compscitech.2010.05.02110.1016/j.compscitech.2010.05.021 ↗
4. 10.1002/polb.110810.1002/polb.1108 ↗
5. 10.1016/j.matlet.2005.10.02010.1016/j.matlet.2005.10.020 ↗
6. 10.1021/ma961786h10.1021/ma961786h ↗
7. 10.1002/pen.1107910.1002/pen.11079 ↗
8. 10.1002/app.161110.1002/app.1611 ↗
9. 10.1002/app.1178210.1002/app.11782 ↗
10. 10.1016/S0142-9418(02)00085-510.1016/S0142-9418(02)00085-5 ↗
11. 10.1002/(SICI)1097-4628(19980103)67:1<87::AID-APP10>3.0.CO;2-210.1002/(SICI)1097-4628(19980103)67:1<87::AID-APP10>3.0.CO;2-2 ↗
12. Reichert P., Nitz H., Klinke S., Brandsch R., Thomann R. and Mulhaupt R. Macromol Mater Eng 2000; 275: 8 17.10.1002/(SICI)1439-2054(20000201)275:1<8::AID-MAME8>3.0.CO;2-6 ↗
13. 10.1016/S1089-3156(01)00014-910.1016/S1089-3156(01)00014-9 ↗
14. 10.1002/app.1369310.1002/app.13693 ↗
15. Tange Y. · Polymer · 2003 · 82 · 127
16. 10.1016/j.matlet.2006.02.00610.1016/j.matlet.2006.02.006 ↗