Interval-based uncertainty models for micromechanical properties of composite materials
Source abstract
Abstract
Extensive work has been done in the past few decades to quantify the uncertainties associated with the micromechanics of composite materials in the presence of uncertainties in constituent material properties using probabilistic approaches. However, the probabilistic approaches require a knowledge of the probability distributions of the input parameters which are not known in most cases. This work presents interval-based uncertainty analysis using probabilistic approach with three sigma band about the mean, interval analysis method and the universal grey system (number) theory. Since the interval analysis predicts wider ranges and, in some cases, might violate the physical laws of the problem, the truncation-based interval analysis is presented to overcome the overestimation caused in the computed quantities by the so-called dependency problem associated with the interval analysis. The uncertainties exhibited in the micromechanics characteristics of composite materials due to the presence of uncertainties in the constituent material properties are investigated. The propagation of these uncertainties to the response characteristics of an angle-ply lamina is also studied. In the numerical study, two types of composite materials are considered – the graphite/epoxy and glass/epoxy systems – to demonstrate and compare the influence of the uncertainty models on the results. This work shows that improved and more meaningful results can be obtained using the universal grey system theory compared to the interval analysis, truncation-based interval analysis and probabilistic method for the micromechanics of composite materials and the response of an angle-ply lamina when the fiber and matrix properties are uncertain.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Probabilistic and Robust Engineering Design · Topology Optimization in Engineering · Structural Health Monitoring Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical and Aerospace Engineering, University of Miami, Coral Gables, FL, USA
References (39)
Show source-provided references
1. Lenoe EM, Neal DM. Effect of variability of design parameters on stress concentration estimates.In: Proceeding of the army symposium on solid mechanics , Watertown, MA, 14-16 September 1976, pp.171–191. Watertown, MA: Army Materials and Mechanics Research Center.
2. Stock TA, Bellini PX, Murthy PLet al. A probabilistic approach to composite micromechanics. In: 29th structure, structural dynamics and materials conference , Williamsburg, Virginia, 18-20 April 1988, NASA-TM-101366.10.2514/6.1988-2375 ↗
3. Mase GT, Murthy PL, Chamis CC. Probabilistic micromechanics and macromechanics of polymer matrix composites. In: 14th annual energy-sources technology conference and exhibition, Houston, TX, 20-24 January 1991, NASA-TM-103669.
4. Chamis CC, Murthy PL. Probabilistic composite analysis. In: 1st NASA advanced composites technology conference , Seattle, WA, USA, 29 October - 1 November 1990, Part 2, pp.891–900. United States: NASA Langley Research Center.
5. Murthy PL, Mital SK, Shah AR. Probabilistic micromechanics and macromechanics for ceramic matrix composites. J Compos Mater 1998; 32: 679-699.10.1177/002199839803200705 ↗
6. 10.2514/1.903910.2514/1.9039 ↗
7. Shiao MC, Singhal SN, Chamis CC. A method for the probabilistic design assessment of composite structures. In: 24th international SAMPE technical conference , Toronto, Ontario, 20-22 October 1992, NASA-TM-106384.
8. Rao SS. Reliability engineering . Upper Saddle River, NJ: Pearson, 2015.
9. Moore RE. Interval analysis. Englewood Cliffs, NJ: Prentice-Hall, 1966, pp.5–39.
10. 10.2514/2.16410.2514/2.164 ↗
11. 10.1016/j.mechrescom.2012.04.00410.1016/j.mechrescom.2012.04.004 ↗
12. 10.1142/S021987620600077110.1142/S0219876206000771 ↗
13. 10.1016/j.ijsolstr.2016.11.02210.1016/j.ijsolstr.2016.11.022 ↗
14. 10.1111/0885-9507.0013410.1111/0885-9507.00134 ↗
15. 10.1061/(ASCE)0733-9399(2005)131:10(1102)10.1061/(ASCE)0733-9399(2005)131:10(1102) ↗
16. 10.1007/s11155-006-9024-310.1007/s11155-006-9024-3 ↗
17. 10.2514/3.1291010.2514/3.12910 ↗
18. 10.1016/j.ijmecsci.2016.11.02010.1016/j.ijmecsci.2016.11.020 ↗
19. 10.1016/j.cma.2017.08.02310.1016/j.cma.2017.08.023 ↗
20. 10.1007/s00158-017-1824-z10.1007/s00158-017-1824-z ↗
21. 10.1002/stc.196510.1002/stc.1965 ↗
22. 10.1016/j.jsv.2018.01.02710.1016/j.jsv.2018.01.027 ↗
23. 10.1016/S0167-6911(82)80025-X10.1016/S0167-6911(82)80025-X ↗
24. LiU S, Lin Y. Grey information: theory and practical applications. Springer, London, 2006, pp.23–43.
25. 10.1016/S0196-8904(02)00248-010.1016/S0196-8904(02)00248-0 ↗
26. 10.4304/jcp.7.1.284-29110.4304/jcp.7.1.284-291 ↗
27. Zhongmo L. · J Seismol · 1986 · 4 · 27
28. Hong G. · Explorat Nat · 1986 · 4 · 69
29. 10.2514/1.J05600410.2514/1.J056004 ↗
30. Mallick PK. Fiber-reinforced composites: materials, manufacturing, and design. 1st ed. New York: Marcel Dekker Inc. 1987, pp.105–109.
31. Barbero EJ. Introduction to composite materials design. 2nd ed. Boca Raton, FL: Taylor Francis Group, 2011, pp.91–140.
32. 10.1017/CBO9780511547140.01210.1017/CBO9780511547140.012 ↗
33. Gibson RF. Principles of composite material mechanics. New York: McGraw-Hill, Inc. 1994, pp.62–98.
34. Tsai SW, Hahn HT. Introduction to composite materials. Westport, CT: Technomic Publishing Co., Inc. 1980, pp.379–430.
35. Chamis CC. · SAMPE Quart · 1984 · 15 · 41
36. Chamis CC. Simplified composite micromechanics equations for hygral, thermal and mechanical properties. In: 38th Annual conference of the society of the plastics industry (SPI), Houston, TX, 7-11 February 1983, United States: Reinforced Plastics/Composites Inst., NASA-TM-83320.
37. Neumaier A. Interval methods for systems of equations. Cambridge, England, UK: Cambridge University Press, 1990, pp.1–76.
38. Chamis CC. · Compos Mater · 1997 · 13 · 23
39. Chamis CC, Murthy PL, Liaw DG. Probabilistic simulation of stress concentration in composite laminates. In: 34th structures, structural dynamics, and materials (SDM) conference , La Jolla, CA, 19-22 April 1993, NASA-TM-106712.10.2514/6.1993-1442 ↗