Spray-coating of graphene nanoplatelets on sisal fibers and its influence on electromechanical behavior of biocomposite laminates
Source abstract
Abstract
Spray coating and vacuum-assisted resin infusion processes were implemented in this work to develop multifunctional biocomposite laminates. The biocomposites were fabricated using a bio-based epoxy resin reinforced with natural sisal fibers coated with graphene nanoplatelets (GNPs). A systematic characterization of material properties was performed to evaluate the mechanical, thermomechanical, electrical, and piezoresistive behavior of biocomposites with different GNPs contents (0, 1, 4, 6, and 8 wt.%). The mechanical tests revealed that adding GNPs to biocomposites has a slight positive effect on their flexural properties compared to the neat biocomposites (without GNPs). The electrical and thermomechanical tests showed that the electrical conductivity and glass transition temperature of biocomposites containing GNPs were enhanced significantly, achieving average values of 5.19 x 10 -4 S/m and 63.29°C (26%), respectively. Regarding electromechanical tests, the biocomposites with 8 wt.% GNPs exhibited an excellent piezoresistive behavior under monotonic loading conditions, achieving a gage factor (strain sensitivity) of 3.56. Bending tests with cyclic loading were also performed, and cyclic reproducibility of the piezoresistive response of the biocomposites after 10 cycles was demonstrated, evidencing that the incorporation of GNPs onto sisal fibers by spray-coating produces an effective formation of conductive networks into biocomposites suitable for sensing applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Carbon Nanotubes in Composites · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Centro de Ingeniería y Desarrollo Industrial, Querétaro, México
Funding
Consejo Nacional de Ciencia y Tecnología
References (31)
Show source-provided references
1. 10.1016/j.jmrt.2021.06.01410.1016/j.jmrt.2021.06.014 ↗
2. 10.3144/expresspolymlett.2022.4110.3144/expresspolymlett.2022.41 ↗
3. Franco-Urquiza EA · 2022 · 1
4. 10.1002/mame.20130000810.1002/mame.201300008 ↗
5. 10.1016/j.conbuildmat.2018.04.14310.1016/j.conbuildmat.2018.04.143 ↗
6. 10.3390/polym1212284110.3390/polym12122841 ↗
7. 10.1177/152808372096568910.1177/1528083720965689 ↗
8. 10.3390/polym1319343510.3390/polym13193435 ↗
9. 10.1201/b1079510.1201/b10795 ↗
10. 10.1126/science.115799610.1126/science.1157996 ↗
11. 10.1021/nl073187210.1021/nl0731872 ↗
12. 10.1021/acsami.9b0469610.1021/acsami.9b04696 ↗
13. 10.1080/09243046.2019.170967910.1080/09243046.2019.1709679 ↗
14. 10.1016/j.matpr.2021.06.33210.1016/j.matpr.2021.06.332 ↗
15. 10.3390/polym1409184110.3390/polym14091841 ↗
16. 10.1080/19475411.2020.171609410.1080/19475411.2020.1716094 ↗
17. 10.3390/polym1210218910.3390/polym12102189 ↗
18. 10.1002/adsu.20200022810.1002/adsu.202000228 ↗
19. 10.1007/s12221-019-8711-810.1007/s12221-019-8711-8 ↗
20. 10.1088/1361-665X/aae96310.1088/1361-665X/aae963 ↗
21. ASTM D7264 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials. West Conshohocken, PA: ASTM International.
22. ASTM D7028 Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer matrix composites by dynamic mechanical analysis (DMA). West Conshohocken, PA: ASTM International.
23. 10.1016/j.proeng.2015.01.19710.1016/j.proeng.2015.01.197 ↗
24. Guezzout Z · J Polym Res · 2017 · 24 · 1
25. 10.1016/0008-6223(88)90157-110.1016/0008-6223(88)90157-1 ↗
26. 10.1016/j.physrep.2009.02.00310.1016/j.physrep.2009.02.003 ↗
27. 10.1088/2053-1591/aa99e310.1088/2053-1591/aa99e3 ↗
28. 10.1155/2013/12435410.1155/2013/124354 ↗
29. 10.1002/pc.2297210.1002/pc.22972 ↗
30. 10.1080/20550324.2017.136541410.1080/20550324.2017.1365414 ↗
31. Sierra-Chi CA · Synthetic Metals · 2022 · 289