Measurement of viscoelastic constants and Poisson’s ratio of carbon fiber reinforced composites using in-situ imaging
Source abstract
Abstract
Dynamic Mechanical Analysis (DMA) is conducted to measure the viscoelastic nature of a material. The commercial DMA equipment calculates the complex modulus ( E*) by assuming a constant Poisson’s ratio. In this work, a method is developed for the simultaneous measurement of Poisson’s ratio and complex modulus ( E*) for carbon fiber (CF) reinforced Acrylonitrile Butadiene Styrene (ABS) composites using in-situ optical measurements and digital image correlation. The computation of E* includes shear deflection and relaxes the assumption of constant Poisson’s ratio to obtain accurate values. DMA was conducted on 3D printed CF-ABS composite specimens with oscillating displacement of 10 µm and static load of 1 N at 1 Hz loading frequency. The results in this work reveal that CF-ABS composite does not have a constant Poisson’s ratio over temperature. Additionally, applying the Poisson’s ratio correction results in higher values for the complex modulus. This work is beneficial for composites where the shear deflection component should not be neglected, and where variation of Poisson’s ratio with respect to temperature is important.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Optical measurement and interference techniques · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Composite Materials and Mechanics Laboratory, Department of Mechanical and Aerospace Engineering, Tandon School of Engineering, New York University, Brooklyn, NY, USA
Rheology Division, Anton Paar USA, Ashland, VA, USA
Funding
United States Agency for International Development
References (42)
Show source-provided references
1. Chung DDL · 2012
2. 10.1007/s10853-007-2333-z10.1007/s10853-007-2333-z ↗
3. 10.1016/j.compositesa.2012.08.02510.1016/j.compositesa.2012.08.025 ↗
4. 10.1016/S0266-3538(03)00119-210.1016/S0266-3538(03)00119-2 ↗
5. 10.1016/j.compositesb.2013.03.02310.1016/j.compositesb.2013.03.023 ↗
6. 10.1016/S1359-835X(00)00068-310.1016/S1359-835X(00)00068-3 ↗
7. 10.1016/S0167-577X(01)00260-910.1016/S0167-577X(01)00260-9 ↗
8. 10.1016/S1359-835X(01)00070-710.1016/S1359-835X(01)00070-7 ↗
9. 10.1016/S0266-3538(96)00072-310.1016/S0266-3538(96)00072-3 ↗
10. 10.1016/j.compscitech.2014.10.00910.1016/j.compscitech.2014.10.009 ↗
11. 10.1016/0266-3538(85)90075-210.1016/0266-3538(85)90075-2 ↗
12. 10.1016/j.compscitech.2020.10831810.1016/j.compscitech.2020.108318 ↗
13. 10.1007/s11837-021-04708-910.1007/s11837-021-04708-9 ↗
14. 10.1016/j.compositesb.2015.06.01310.1016/j.compositesb.2015.06.013 ↗
15. 10.1007/s42114-018-0026-510.1007/s42114-018-0026-5 ↗
16. 10.1016/j.polymer.2016.08.05310.1016/j.polymer.2016.08.053 ↗
17. 10.1016/j.compositesb.2017.03.06210.1016/j.compositesb.2017.03.062 ↗
18. 10.1016/j.compositesb.2018.10.01510.1016/j.compositesb.2018.10.015 ↗
19. 10.1016/j.polymer.2018.10.03610.1016/j.polymer.2018.10.036 ↗
20. 10.1016/j.mtla.2018.09.03410.1016/j.mtla.2018.09.034 ↗
21. 10.1007/s11837-019-03666-710.1007/s11837-019-03666-7 ↗
22. 10.1002/adts.20180013110.1002/adts.201800131 ↗
23. 10.1007/s10853-019-03481-010.1007/s10853-019-03481-0 ↗
24. 10.1177/0731684421105914510.1177/07316844211059145 ↗
25. 10.1016/j.polymertesting.2014.11.00410.1016/j.polymertesting.2014.11.004 ↗
26. 10.1002/pen.2106010.1002/pen.21060 ↗
27. 10.1016/j.polymer.2022.12456210.1016/j.polymer.2022.124562 ↗
28. Yanamandra K · 2022
29. CarbonX™ 3DXTECH. High-performance carbon fiber ABS+CF 3D printing filament, https://www.3dxtech.com/product/carbonx-abs-cf/ (2021, 15 October 2022).
30. 2021
31. 10.1007/s11340-014-9886-y10.1007/s11340-014-9886-y ↗
32. ASTM D638-14. Standard test method for tensile properties of plastics, https://www.astm.org/Standards/D638 (2014, 15 October 2022).
33. ASTM D790-17. Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials, https://www.astm.org/Standards/D790 (2017, 15 October 2022).
34. Groenewoud WM · 2001
35. Applications training: dynamic mechanical analysis, https://www.tainstruments.com/dynamic-mechanical-analysis-training/ (2021, 15 October 2022).
36. Anton‐Paarcom, https://www.anton-paar.com/us-en/ (2021, 15 October 2022).
37. 10.1111/str.1229410.1111/str.12294 ↗
38. 10.1016/0167-6636(94)90012-410.1016/0167-6636(94)90012-4 ↗
39. 10.1016/S0003-682X(99)00049-310.1016/S0003-682X(99)00049-3 ↗
40. 10.1007/s11340-006-8528-410.1007/s11340-006-8528-4 ↗
41. 10.1007/s11340-015-0009-110.1007/s11340-015-0009-1 ↗
42. 10.1109/LES.2022.314041710.1109/LES.2022.3140417 ↗