An effective model for fiber breakage prediction of injection-molded long fiber reinforced thermoplastics
Source abstract
Abstract
Fiber length is an important factor affecting the mechanical properties of long fiber reinforced thermoplastic (LFRT). When LFRT is processed by injection molding, the strong shear flow usually leads to severe fiber breakage. Therefore, it is a crucial issue to reduce the loss of fiber length as much as possible during composite molding. Current work focused on constructing an effective model for predicting fiber breaking caused by shear stress during melt filling. Based on the Oseen formula, the disturbance of liquid flow caused by a single external force was studied, and the force acceptance formula of fiber immersed in flow field was derived. A mechanical model for characterizing the degree of fibers buckling and breaking and the shear stress was constructed by the Euler buckling criterion. To verify the model, glass fiber reinforced polypropylene (GF/PP) composites with initial fiber length of 3 mm and 6 mm was subjected to shear at the specific shear rate by using a rotating rheometer. The length of GF after sheared was measured by fiber length distribution analyser. The breaking ratio of fibers was predicted using the new model, and the predicted results were in good agreement with experiment, although more comparisons with experiments are necessary.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Composite Material Mechanics · Mechanical Behavior of Composites · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
National Engineering Research Center for Advanced Polymer Processing Technology, Zhengzhou University, Zhengzhou, China
State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian, China
Funding
the National Key Research and Development Program of China · the Natural Science Fund of Henan Province · the Key Research Project for Henan Universities · the Open Fund of State Key Laboratory of Structural Analysis for Industrial Equipment of DUT
References (39)
Show source-provided references
1. 10.1016/j.compstruct.2017.02.07710.1016/j.compstruct.2017.02.077 ↗
2. 10.1016/j.compscitech.2013.06.00910.1016/j.compscitech.2013.06.009 ↗
3. 10.3139/217.244210.3139/217.2442 ↗
4. 10.1016/j.compositesb.2017.12.00710.1016/j.compositesb.2017.12.007 ↗
5. 10.1016/j.compositesa.2008.05.01710.1016/j.compositesa.2008.05.017 ↗
6. 10.1016/S1359-835X(02)00179-310.1016/S1359-835X(02)00179-3 ↗
7. 10.1016/j.compositesa.2008.08.00110.1016/j.compositesa.2008.08.001 ↗
8. 10.1016/j.matdes.2015.07.09710.1016/j.matdes.2015.07.097 ↗
9. Steffens M, Himmel N, Maier M. Design and analysis of discontinuous long fiber reinforced thermoplastic structures for car seat applications. In: Proceedings of the International Conference on Computer Methods in Composite Materials, CADCOMP, Montreal, Canada, WIT Transactions on Engineering Sciences, 26–28 August 1998; pp: 35–44.
10. 10.1002/adv.2003510.1002/adv.20035 ↗
11. Huang CT, Tseng HC, Vlcek J, et al. Fiber breakage phenomena in long fiber reinforced plastic preparation. In: 2015 global conference on polymer and composite materials . Bristol: Iop Publishing Ltd 2015; 87: 012023.10.1088/1757-899X/87/1/012023 ↗
12. 10.1177/002199830808860610.1177/0021998308088606 ↗
13. Lopez de Armentia S, Enciso B, Mokry G, et al. Novel application of a thermoplastic composite with improved matrix-fiber interface. J Mater Res Technol 2019; 8(6): 5536–5547.10.1016/j.jmrt.2019.09.022 ↗
14. 10.1016/j.jiec.2019.08.01210.1016/j.jiec.2019.08.012 ↗
15. 10.1016/j.compstruct.2016.05.01110.1016/j.compstruct.2016.05.011 ↗
16. 10.1016/j.compositesa.2013.04.00210.1016/j.compositesa.2013.04.002 ↗
17. 10.1002/pc.2457110.1002/pc.24571 ↗
18. 10.1177/073168440403396010.1177/0731684404033960 ↗
19. 10.1016/S1359-835X(02)00150-110.1016/S1359-835X(02)00150-1 ↗
20. 10.1016/j.cjche.2015.12.01210.1016/j.cjche.2015.12.012 ↗
21. 10.1016/1359-835X(96)00066-810.1016/1359-835X(96)00066-8 ↗
22. 10.1016/1359-835X(95)00065-A10.1016/1359-835X(95)00065-A ↗
23. 10.1016/S1359-835X(96)00127-310.1016/S1359-835X(96)00127-3 ↗
24. 10.1002/pc.2121710.1002/pc.21217 ↗
25. 10.1002/pen.76023130910.1002/pen.760231309 ↗
26. 10.1016/S1359-835X(02)00114-810.1016/S1359-835X(02)00114-8 ↗
27. 10.1016/j.jnnfm.2018.10.00810.1016/j.jnnfm.2018.10.008 ↗
28. 10.3139/217.87009410.3139/217.870094 ↗
29. 10.1016/0266-3538(91)90032-K10.1016/0266-3538(91)90032-K ↗
30. 10.1002/pc.1041210.1002/pc.10412 ↗
31. 10.1016/j.compositesa.2012.12.01110.1016/j.compositesa.2012.12.011 ↗
32. 10.1002/pen.1157010.1002/pen.11570 ↗
33. Physik Z. Neuere methoden und ergebnisse in der hydrodynamik. Monatsh. Math. Phys. 1928; 35: A67–A68.10.1007/BF01707470 ↗
34. Burgers JM. On the motion of small particles of elongated form. Suspended in a viscous liquid . Netherlands: Springer, 1995, pp.209–280.10.1007/978-94-011-0195-0_9 ↗
35. 10.1016/0095-8522(59)90012-110.1016/0095-8522(59)90012-1 ↗
36. 10.1007/s00707-016-1586-510.1007/s00707-016-1586-5 ↗
37. 10.1098/rspa.1922.007810.1098/rspa.1922.0078 ↗
38. 10.1122/1.55036210.1122/1.550362 ↗
39. 10.1016/j.jnnfm.2008.08.00210.1016/j.jnnfm.2008.08.002 ↗