Mechanical and Microstructural Evaluation of Polymer Matrix Composites Filled with Recycled Industrial Waste
Source abstract
Abstract
In this study, the influence of the addition of industrial waste of polyester and EVA (ethylene vinyl acetate) on the mechanical properties of polyester resin was studied. Specimens were fabricated and tested for the evaluation of flexural properties and Charpy impact resistance. Properties of the filled materials were measured and compared to those of the plain resin. The effect of particle size and filler content was also investigated. Then, fracture surfaces were analyzed by scanning electron microscopy (SEM). The results indicate reductions in flexural strength and strain to failure with the addition of particulate fillers. However, an increase of about 6% in impact resistance was observed in composites with 12.5 wt% of EVA.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Polymer crystallization and properties · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade Federal do Rio Grande do Norte, Department of Materials Engineering, Natal - RN, CEP 59072-970, Brazil,
Universidade Federal do Rio Grande do Norte, Department of Materials Engineering, Natal - RN, CEP 59072-970, Brazil
References (20)
Show source-provided references
1. 10.1016/S1359-8368(96)00042-X10.1016/S1359-8368(96)00042-X ↗
2. Barros, G.A.
3. 10.1177/073168440606206010.1177/0731684406062060 ↗
4. 10.1002/pi.69110.1002/pi.691 ↗
5. 10.1002/(SICI)1097-4628(20000624)76:13<1929::AID-APP10>3.0.CO;2-H10.1002/(SICI)1097-4628(20000624)76:13<1929::AID-APP10>3.0.CO;2-H ↗
6. 10.1016/S0142-9418(00)00018-010.1016/S0142-9418(00)00018-0 ↗
7. 10.1016/S0014-3057(98)00223-710.1016/S0014-3057(98)00223-7 ↗
8. 10.1177/073168440403286910.1177/0731684404032869 ↗
9. 10.1016/S0032-3861(02)00187-810.1016/S0032-3861(02)00187-8 ↗
10. 10.1016/S0014-3057(01)00082-910.1016/S0014-3057(01)00082-9 ↗
11. 10.1016/j.compstruct.2003.09.02110.1016/j.compstruct.2003.09.021 ↗
12. 10.1016/j.compositesa.2005.05.03010.1016/j.compositesa.2005.05.030 ↗
13. 10.1016/S0165-2370(02)00161-410.1016/S0165-2370(02)00161-4 ↗
14. ASTM D 6110-05a, Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics, 2005.
15. ASTM D 790-03, Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials, 2003.
16. Raghavan, J. · , and Manufacturing of Polymers and Polymer Composites, Journal of Applied Polymer Science · 1999 · 71 · 775
17. 10.1177/089270570504956010.1177/0892705705049560 ↗
18. 10.1177/08927057940070010410.1177/089270579400700104 ↗
19. 10.1007/BF0061716010.1007/BF00617160 ↗
20. 10.1177/08927057940070010510.1177/089270579400700105 ↗