3D printing of continuous fiber reinforced cellular structural composites for the study of bending performance
Source abstract
Abstract
Optimization of 3D printing factors has been the underlying issue for the last decade. Herein, a 3D-printing procedure was operated to fabricate continuous fiber-reinforced composites in various shape-filled cellular structures based on Kevlar fiber and polylactic acid The efficient processing parameters in bending performance have been systematically studied, such as printing path, fiber orientation, infill density, cell length, and layer thickness. A three-point bending test revealed that, as the effective density increased, there was an irrefutable rise in strength and stiffness of CFRCs with different infill structures. Structural parameters like cell length could improve bending performance; this effect was evaluated by adjusting the fiber orientations along the stretching direction. Furthermore, a finite element model was developed, and its results were verified with the experimental results. The sample of the rhombus-filled cellular CFRCs with a layer thickness of 0.1 mm was found to have the highest bending strength and modulus of 53.61 MPa and 2728.41 MPa, respectively. Since mechanical behavior mostly depends on numerous microstructural factors, plenty of prototypes should be designed to achieve the required bending strength and flexural modulus—this work is a pattern guide to reduce the number of printed samples.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Innovations in Concrete and Construction Materials · Cellular and Composite Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory of Eco-Textiles, Ministry of Education, Jiangnan University, Wuxi, China
School of Mechanical Engineering, Jiangnan University, Wuxi, P.R. China
School of System Design and Intelligent Manufacturing, Southern University of Science and Technology, Shenzhen, China
Department of Industrial and Systems Engineering, The Hong Kong Polytechnic University, Hong Kong, China
Funding
Fibre materials and products for emergency support and public safety · National Natural Science Foundation of China
References (32)
Show source-provided references
1. 10.1016/j.compstruct.2019.11114710.1016/j.compstruct.2019.111147 ↗
2. 10.1016/j.matdes.2020.10930310.1016/j.matdes.2020.109303 ↗
3. 10.1016/j.matdes.2019.10788410.1016/j.matdes.2019.107884 ↗
4. 10.1002/suco.20170022510.1002/suco.201700225 ↗
5. 10.1016/j.compstruct.2018.10.00910.1016/j.compstruct.2018.10.009 ↗
6. 10.1016/j.apsusc.2016.04.07510.1016/j.apsusc.2016.04.075 ↗
7. 10.1007/s42114-018-0072-z10.1007/s42114-018-0072-z ↗
8. 10.1007/s42114-018-0065-y10.1007/s42114-018-0065-y ↗
9. 10.3390/polym1002016910.3390/polym10020169 ↗
10. 10.1016/S0266-3538(01)00164-610.1016/S0266-3538(01)00164-6 ↗
11. 10.1016/j.compstruct.2006.04.09010.1016/j.compstruct.2006.04.090 ↗
12. ASTM F2792, 12a standard terminology for additive manufacturing technologies, (withdrawn 2015) 2015. https://link.springer.com/article/10.1007/s00170-016-9036-z
13. 10.1016/j.compositesb.2018.02.01210.1016/j.compositesb.2018.02.012 ↗
14. 10.1016/j.compstruct.2017.08.08810.1016/j.compstruct.2017.08.088 ↗
15. 10.1016/j.bushor.2017.05.01110.1016/j.bushor.2017.05.011 ↗
16. 10.1016/j.compstruct.2020.11261010.1016/j.compstruct.2020.112610 ↗
17. 10.1016/j.compositesb.2016.11.03410.1016/j.compositesb.2016.11.034 ↗
18. 10.1021/acsaelm.1c0053410.1021/acsaelm.1c00534 ↗
19. 10.1016/j.addma.2018.01.00210.1016/j.addma.2018.01.002 ↗
20. 10.1002/app.5212510.1002/app.52125 ↗
21. 10.1021/acsaelm.1c0109810.1021/acsaelm.1c01098 ↗
22. 10.1016/j.compositesb.2021.10899410.1016/j.compositesb.2021.108994 ↗
23. 10.1007/s00397-019-01151-110.1007/s00397-019-01151-1 ↗
24. 10.1108/RPJ-08-2015-009810.1108/RPJ-08-2015-0098 ↗
25. 10.1016/j.compositesa.2016.05.03210.1016/j.compositesa.2016.05.032 ↗
26. 10.1016/j.addma.2017.06.00410.1016/j.addma.2017.06.004 ↗
27. 10.1038/srep2305810.1038/srep23058 ↗
28. 10.1016/j.addma.2018.09.01910.1016/j.addma.2018.09.019 ↗
29. 10.1016/j.compositesa.2018.07.02910.1016/j.compositesa.2018.07.029 ↗
30. 10.1016/j.compositesa.2022.10694610.1016/j.compositesa.2022.106946 ↗
31. 10.1007/s11665-016-2459-810.1007/s11665-016-2459-8 ↗
32. 10.1007/s10853-017-1624-210.1007/s10853-017-1624-2 ↗