journal article·2021-04

A new strategy of reusing abandoned carbon fiber reinforced plastic: Microstructures and properties of C/C composites based on recycled carbon fiber

Wenjian Guo, Shuxin Bai, Yicong Ye

Publisher page

Abstract

A new strategy of recycling and reusing abandoned carbon fiber reinforced plastics (CFRP) is proposed: CFRPs are first fully carbonized to CF reinforced carbon (C/C) preforms, and then are manufactured into high value-added C/C composites. The results showed that the carbon residue rate of epoxy-resin (EP) matrix was fully recovered as the decomposition route of EP matrix was changed by charring agent. The recycled CF (rCF) was not markedly oxidized or thermally damaged, and possessed comparable properties with those of the virgin CF (vCF) after pyrolysis. The pyrolytic char had no obvious negative effect on the densification efficiency of the rCF reinforced carbon (rCF/C) composites. Both of the rCF/C and vCF reinforced carbon (vCF/C) composite bodies were quite dense, and exhibited almost no difference in their microstructures. The rCF/C and vCF/C composites therefore had quite close interface bonding strength (12.6 MPa and 13.0 MPa, respectively), and bending strength (106.4 MPa and 111.5 MPa, respectively). Furthermore, the rCF/C composites possessed comparable ablative rate with that of the vCF/C composites. The rCF/C composites derived from abandoned CF/EP composites present a great potential to be used as substitutes for vCF/C composites owing to their indistinguishable properties.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Recycling and Waste Management Techniques · Graphene research and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Advanced Materials, East China Jiao Tong University, Nanchang, China

College of Aerospace Science, National University of Defense Technology, Changsha, China

References (37)

Show source-provided references
1. 10.1016/j.compositesa.2013.02.00910.1016/j.compositesa.2013.02.009 ↗
2. 10.1016/j.jaap.2011.01.00510.1016/j.jaap.2011.01.005 ↗
3. 10.1016/j.jmatprotec.2005.02.22610.1016/j.jmatprotec.2005.02.226 ↗
4. Kraus T · The Global CRP Market · 2014
5. 10.1016/j.compositesa.2010.05.00510.1016/j.compositesa.2010.05.005 ↗
6. 10.1002/pc.1046810.1002/pc.10468 ↗
7. 10.1016/j.compositesa.2009.02.00210.1016/j.compositesa.2009.02.002 ↗
8. 10.1016/j.compositesa.2005.05.03010.1016/j.compositesa.2005.05.030 ↗
9. 10.1177/002199830809773710.1177/0021998308097737 ↗
10. 10.1016/j.materresbull.2004.04.03110.1016/j.materresbull.2004.04.031 ↗
11. 10.1016/j.jhazmat.2009.05.06510.1016/j.jhazmat.2009.05.065 ↗
12. 10.1016/j.jaap.2013.04.01210.1016/j.jaap.2013.04.012 ↗
13. 10.1016/j.wasman.2010.09.01910.1016/j.wasman.2010.09.019 ↗
14. 10.1016/j.matdes.2009.07.05710.1016/j.matdes.2009.07.057 ↗
15. 10.1016/j.supflu.2008.02.00810.1016/j.supflu.2008.02.008 ↗
16. 10.1016/j.polymer.2004.12.03510.1016/j.polymer.2004.12.035 ↗
17. 10.1016/j.compositesa.2012.06.00810.1016/j.compositesa.2012.06.008 ↗
18. 10.1016/j.polymdegradstab.2011.12.02810.1016/j.polymdegradstab.2011.12.028 ↗
19. 10.1021/acssuschemeng.8b0102610.1021/acssuschemeng.8b01026 ↗
20. 10.1016/j.compositesa.2018.03.01110.1016/j.compositesa.2018.03.011 ↗
21. 10.1016/j.compositesa.2017.05.00810.1016/j.compositesa.2017.05.008 ↗
22. 10.1021/acs.est.7b0406910.1021/acs.est.7b04069 ↗
23. 10.1016/j.pmatsci.2015.01.00410.1016/j.pmatsci.2015.01.004 ↗
24. 10.1016/j.compositesa.2010.01.01210.1016/j.compositesa.2010.01.012 ↗
25. Elghazzaoui H. Contribution à l’étude de la dégradation des composites carbone/époxy par solvolyse dans l’eausubcritique et supercritique en vue de leur recyclage . PhD Thesis, Université de Nantes, France, 2012.
26. Connor ML. Characterization of recycled carbon fibers and their formation of composites using injection molding. Master Thesis, North Carolina State University, USA, 2008.
27. Szpieg M. Development and characteristics of a fully recycled CF/PP composite . PhD Thesis, Luleå University of Technology, Sweden, 2011.
28. 10.1016/j.compscitech.2012.02.01310.1016/j.compscitech.2012.02.013 ↗
29. 10.1016/j.compscitech.2016.11.00110.1016/j.compscitech.2016.11.001 ↗
30. 10.1016/j.compositesa.2019.01.01210.1016/j.compositesa.2019.01.012 ↗
31. 10.1016/S0016-2361(03)00129-710.1016/S0016-2361(03)00129-7 ↗
32. 10.1016/S0016-2361(99)00220-310.1016/S0016-2361(99)00220-3 ↗
33. 10.1016/j.polymdegradstab.2016.01.01110.1016/j.polymdegradstab.2016.01.011 ↗
34. 10.1016/j.polymdegradstab.2015.11.01810.1016/j.polymdegradstab.2015.11.018 ↗
35. 10.1016/0008-6223(93)90056-G10.1016/0008-6223(93)90056-G ↗
36. 10.1016/j.ceramint.2019.05.19110.1016/j.ceramint.2019.05.191 ↗
37. 10.1007/s10853-012-6694-610.1007/s10853-012-6694-6 ↗