Kink band evolution in polymer matrix composites under bending: A digital image correlation study
Source abstract
Abstract
Polymer matrix composites are attractive structural materials in automotive, defense, and aerospace industries due to their high strength to low weight ratios. However, due to their low shear strength, compression dominated failure mechanisms such as plastic microbuckling lead to the development of kink bands, which are a key strength-limiting factor in modern polymer matrix composites. This phenomenon has been studied extensively, particularly for uniaxial compression; however, experimental measurements of the strain fields leading to and developing inside these bands under bending are not well explored. In this study, digital image correlation is used to measure strains inside kink bands developing during three-point bending of cross-plied [0/90] laminated composite Dyneema™ HB80. Measurements indicated large normal and shear strains developed inside the band in a way that suggested systematic increases in ply rotation angle as the band evolved with increased bending deflection. Results also suggested intermittent buckling events involving fiber bundles that correlate with oscillations observed in the load–displacement curve. Optical microscopy of failed samples showed failure resulted from a combination of plastic microbuckling and axial splitting.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Response to Dynamic Loads · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanical and Aerospace Engineering, Arizona State University, Tempe, USA
BAE Systems Inc., Phoenix, USA
References (36)
Show source-provided references
1. Agarwal B · 2006
2. 10.1016/S0065-2156(08)70385-510.1016/S0065-2156(08)70385-5 ↗
3. Rosen BW · 1965
4. 10.1016/0266-3538(91)90064-V10.1016/0266-3538(91)90064-V ↗
5. 10.1016/0022-5096(93)90068-Q10.1016/0022-5096(93)90068-Q ↗
6. Argon AS · 1972
7. 10.1007/BF0056627710.1007/BF00566277 ↗
8. 10.1016/0020-7683(94)00157-R10.1016/0020-7683(94)00157-R ↗
9. 10.1016/0956-7151(95)00001-C10.1016/0956-7151(95)00001-C ↗
10. 10.1016/0001-6160(78)90023-810.1016/0001-6160(78)90023-8 ↗
11. 10.1177/00219983920260180410.1177/002199839202601804 ↗
12. 10.1016/j.compscitech.2009.02.01010.1016/j.compscitech.2009.02.010 ↗
13. Greszczuk LB. On failure modes of unidirectional composites under compressive loading. In: Shih GC and Tamuze UP (eds) Symposium on fracture of composite materials . Boston, MA: Martimus Nijhoff Publishers, 1982, pp.231–244.10.1007/978-94-009-7609-2_19 ↗
14. 10.1016/S0020-7683(00)00174-810.1016/S0020-7683(00)00174-8 ↗
15. 10.1016/j.compstruct.2017.05.04610.1016/j.compstruct.2017.05.046 ↗
16. 10.1016/j.compscitech.2019.10768510.1016/j.compscitech.2019.107685 ↗
17. 10.1023/A:101877930793110.1023/A:1018779307931 ↗
18. 10.1016/j.compstruct.2012.11.00510.1016/j.compstruct.2012.11.005 ↗
19. 10.1016/j.compstruct.2011.09.01210.1016/j.compstruct.2011.09.012 ↗
20. 10.1016/j.compstruct.2018.07.01010.1016/j.compstruct.2018.07.010 ↗
21. 10.1016/j.actamat.2017.04.05010.1016/j.actamat.2017.04.050 ↗
22. 10.1016/j.compositesb.2012.05.02110.1016/j.compositesb.2012.05.021 ↗
23. 10.1016/j.compscitech.2015.11.02610.1016/j.compscitech.2015.11.026 ↗
24. 10.1177/00219983940280010510.1177/002199839402800105 ↗
25. 10.1016/S1359-835X(97)00067-510.1016/S1359-835X(97)00067-5 ↗
26. 10.1016/S0266-3538(99)00053-610.1016/S0266-3538(99)00053-6 ↗
27. 10.1016/0266-3538(94)90041-810.1016/0266-3538(94)90041-8 ↗
28. Liu G, Thouless MD, Deshpande VS, et al. Collapse of a composite beam made from ultra-high molecular-weight polyethylene fibres . Master’s Thesis, Cambridge University, 2013.10.1016/j.jmps.2013.08.021 ↗
29. Patel J and Peralta P. Mechanisms for kink band evolution in polymer matrix composites: a digital image correlation and finite element study. In: ASME International Mechanical Engineering Congress and Exposition , Volume 9: Mechanics of Solids, Structures and Fluids; NDE, Diagnosis, and Prognosis, Phoenix, Arizona, USA, 11–17 November 2016, paper no. IMECE2016-67482, V009T12A055.10.1115/IMECE2016-67482 ↗
30. ASTM D7264/D7264M - 07. Standard test methods for flexural properties of polymer matrix composite materials . West Conshohocken, PA: ASTM International, 2015.
31. ARAMIS™. User's Manual, v6.1. GOM mbH, Braunschweig, Germany, 2009.
32. Greszczuk LB. Prediction of transverse strength and scatter in test data for unidirectional composites. West Conshohocken, PA: American Society for Testing and Materials, 1974, pp.311–316.10.1520/STP32316S ↗
33. 10.1007/BF0113292710.1007/BF01132927 ↗
34. 10.2514/3.635210.2514/3.6352 ↗
35. 10.1299/jsme1958.27.269410.1299/jsme1958.27.2694 ↗
36. 10.1016/B978-0-444-87285-2.50005-410.1016/B978-0-444-87285-2.50005-4 ↗