journal article·2015-07

The effect of materials and surface preparation on joining methods: A review

Marcella D Carnes, Primus V Mtenga

Publisher page

Abstract

Materials have been the primary element of the structural community from the existence of ceramics to the more durable and efficient polymers. The uniqueness of these materials stems from a necessity of a particular era. Because of the uniqueness of each material, the study of damage is of key interest in materials research. In conjunction with the essential materials, proper joining techniques are also fundamental in infrastructure; however, joints represent one of the greatest challenges in the design of structures. Current forms of joining include mechanical and adhesive, where adhesive bonding is preferred. However, no joint can be properly designed without adequate surface preparation. Proper methods for surface preparation and joining techniques will be reviewed for composite materials. This review will highlight some of the common approaches used to enhance the strength of the joint and, therefore, the structure itself.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Smart Materials for Construction · Structural Load-Bearing Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil & Environmental Engineering, Florida A&M University, Tallahassee, FL, USA

References (72)

Show source-provided references
1. 10.1007/978-1-4615-5133-110.1007/978-1-4615-5133-1 ↗
2. Adams RD, Wake WC, Comyn J. Structural adhesive joints in engineering 1997; Vol 2: Netherlands: Springer.
3. 10.1016/j.ijadhadh.2004.11.00610.1016/j.ijadhadh.2004.11.006 ↗
4. 10.1016/S0263-8223(00)00052-010.1016/S0263-8223(00)00052-0 ↗
5. Strong AB. Fundamentals of composites manufacturing: materials methods and applications. Dearborn Michigan: Society of Manufacturing engineers 2008 p.640.
6. Banea MD, da Silva LFM. Adhesively bonded joints in composite materials: An overview. Proc Instit Mech Eng, Part L: J Mater Des Appl 2009; 223: 1–18.
7. 10.5402/2012/74630810.5402/2012/746308 ↗
8. 10.1163/15685610778043749910.1163/156856107780437499 ↗
9. 10.1016/j.compositesa.2004.03.00210.1016/j.compositesa.2004.03.002 ↗
10. 10.1243/PIME_PROC_1995_209_278_0210.1243/PIME_PROC_1995_209_278_02 ↗
11. Maxwell D and Bond D. Principles and practices of adhesive bonded structural joints and repairs. International Journal of Adhesion and Adhesives 1999; 19(2): 91–105.10.1016/S0143-7496(98)00026-8 ↗
12. Brent Strong A SWB Joining composite materials- mechanical or adhesive?.
13. 10.1177/089270570403333610.1177/0892705704033336 ↗
14. 10.3763/asre.2007.502710.3763/asre.2007.5027 ↗
15. Hota G and Liang R. Advanced fiber reinforced polymer composites for sustainable civil infrastructures. In: Proceedings of the International Symposium on Innovation & Sustainability of Structures in Civil Engineering Xiamen University China 2011.
16. 10.1016/j.compscitech.2007.11.00610.1016/j.compscitech.2007.11.006 ↗
17. 10.1007/s10853-008-2646-610.1007/s10853-008-2646-6 ↗
18. 10.1016/j.compstruct.2005.04.00610.1016/j.compstruct.2005.04.006 ↗
19. 10.1007/BF0274998210.1007/BF02749982 ↗
20. Kelly G. Load introduction in carbon fibre composites for automotive applications. Report Royal Institute of Technology. Stockholm Sweden 2002.
21. 10.1016/j.mseb.2006.02.04610.1016/j.mseb.2006.02.046 ↗
22. 10.1016/j.jsv.2007.03.08810.1016/j.jsv.2007.03.088 ↗
23. Davalos JF Qiao P and Shan L. Advanced fibre-reinforced polymer (FRP) composites for use in civil engineering. In: Bai J (ed.) Advanced civil infrastructure materials: Science mechanics and applications. 2006 pp.118--202.10.1533/9781845691172.118 ↗
24. Humphreys M.F. The use of polymer composites in construction. In: International Conference on Smart and Sustainable Built Environment Brisbane Australia November 2003.
25. 10.1520/CTR10895J10.1520/CTR10895J ↗
26. 10.1016/S0143-7496(00)00044-010.1016/S0143-7496(00)00044-0 ↗
27. 10.1016/j.compositesa.2005.02.01210.1016/j.compositesa.2005.02.012 ↗
28. Flinn B and Phariss M. Effect of peel-ply surface preparation variables on bond quality. Report U.S. Department of Transportation 2006.
29. 10.1080/0021846050041851610.1080/00218460500418516 ↗
30. 10.1023/B:JMSC.0000007726.58758.e410.1023/B:JMSC.0000007726.58758.e4 ↗
31. 10.1080/0021846060068394410.1080/00218460600683944 ↗
32. 10.1163/016942410X50764110.1163/016942410X507641 ↗
33. 10.1016/S0143-7496(01)00020-310.1016/S0143-7496(01)00020-3 ↗
34. 10.1080/00218464.2011.56211410.1080/00218464.2011.562114 ↗
35. 10.1016/j.ijadhadh.2014.02.00610.1016/j.ijadhadh.2014.02.006 ↗
36. 10.1016/j.compstruct.2005.01.02310.1016/j.compstruct.2005.01.023 ↗
37. 10.1016/S0143-7496(98)00033-510.1016/S0143-7496(98)00033-5 ↗
38. 10.1016/1359-835X(95)00064-910.1016/1359-835X(95)00064-9 ↗
39. 10.1163/15685610777997613210.1163/156856107779976132 ↗
40. 10.1163/016942410X50762310.1163/016942410X507623 ↗
41. 10.1016/j.apsusc.2013.07.02810.1016/j.apsusc.2013.07.028 ↗
42. Kim SJ Smith ST and Young B. Effect of surface preparation on the strength of FRP-to-mild steel and FRP-to-stainless steel joints. In: Ye L Feng P and Yue Q (eds) Advances in FRP composites in civil engineering. Springer Berlin Heidelberg 2011 pp.869–872.10.1007/978-3-642-17487-2_191 ↗
43. 10.1016/j.conbuildmat.2012.09.11210.1016/j.conbuildmat.2012.09.112 ↗
44. 10.1007/s10800-004-8330-x10.1007/s10800-004-8330-x ↗
45. 10.1023/A:102265332845010.1023/A:1022653328450 ↗
46. 10.1016/S0263-8223(01)00057-510.1016/S0263-8223(01)00057-5 ↗
47. 10.1016/j.ijadhadh.2006.09.01610.1016/j.ijadhadh.2006.09.016 ↗
48. 10.1016/j.ijadhadh.2008.09.00110.1016/j.ijadhadh.2008.09.001 ↗
49. 10.1016/j.ijadhadh.2012.10.01010.1016/j.ijadhadh.2012.10.010 ↗
50. 10.1016/j.ijfatigue.2013.01.01410.1016/j.ijfatigue.2013.01.014 ↗
51. 10.3103/S105261880804015810.3103/S1052618808040158 ↗
52. 10.1016/j.tafmec.2007.10.00210.1016/j.tafmec.2007.10.002 ↗
53. 10.1115/1.274439310.1115/1.2744393 ↗
54. 10.1007/s10443-005-1324-y10.1007/s10443-005-1324-y ↗
55. 10.1016/j.compstruct.2006.06.00610.1016/j.compstruct.2006.06.006 ↗
56. 10.1016/j.ijadhadh.2006.01.01210.1016/j.ijadhadh.2006.01.012 ↗
57. 10.1016/j.ijadhadh.2012.10.00510.1016/j.ijadhadh.2012.10.005 ↗
58. 10.1016/j.jcsr.2008.03.01210.1016/j.jcsr.2008.03.012 ↗
59. 10.1061/(ASCE)1090-0268(2005)9:4(304)10.1061/(ASCE)1090-0268(2005)9:4(304) ↗
60. 10.1016/j.compositesa.2005.05.02610.1016/j.compositesa.2005.05.026 ↗
61. 10.1061/(ASCE)1090-0268(2003)7:4(311)10.1061/(ASCE)1090-0268(2003)7:4(311) ↗
62. 10.1016/j.conbuildmat.2012.11.02410.1016/j.conbuildmat.2012.11.024 ↗
63. 10.1016/j.ijadhadh.2010.12.00310.1016/j.ijadhadh.2010.12.003 ↗
64. 10.1163/156856108X30958510.1163/156856108X309585 ↗
65. 10.1016/j.compstruct.2007.12.00510.1016/j.compstruct.2007.12.005 ↗
66. 10.1016/j.compscitech.2006.04.00710.1016/j.compscitech.2006.04.007 ↗
67. 10.1016/j.compstruct.2009.09.05610.1016/j.compstruct.2009.09.056 ↗
68. 10.1016/j.compositesb.2012.01.02410.1016/j.compositesb.2012.01.024 ↗
69. 10.1163/15685610074236610.1163/156856100742366 ↗
70. 10.1016/j.compositesa.2008.02.00210.1016/j.compositesa.2008.02.002 ↗
71. 10.1016/S1359-835X(03)00005-810.1016/S1359-835X(03)00005-8 ↗
72. 10.1016/j.conbuildmat.2011.12.00110.1016/j.conbuildmat.2011.12.001 ↗