Experimental investigation of friction between prepreg tape and compaction roller for prepreg tape hoop winding
Source abstract
Abstract
As an inevitable issue in the filament winding technology, the process-induced friction has gained increasing attention. The purpose of this study is to illustrate the experimental investigation of friction between prepreg tape and hot compaction roller in prepreg tape hoop winding system. Based on the modified version of Howell’s equation, the friction model is established to offer an indirect method for measuring the frictional coefficient during the actual composite fabricating process. Three types of prepreg tapes, namely T300/Y69 unidirectional prepreg tape, T300/DFQS-3 and BWT260-82/DFQS-3 orthogonal prepreg tapes are selected to discuss the effect of process parameters on friction under different processing conditions. The experimental results reveal that the friction behavior transfers from resin-dominated friction to fiber-governed friction as the temperature rises. Besides, acceleration of the spindle speed on the frictional coefficient can be markedly improved due to the increase of resin strain rate. Meanwhile, the fiber has a stronger ability to increase friction than resin. It is also observed that the friction plays a role in amplifying the winding tension by comparing the winding tension with the outgoing winding tension.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Vibration and Dynamic Analysis · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Ministry of Education, Northwestern Polytechnical University, Xi’an, People’s Republic of China
Funding
National Natural Science Foundation of China
References (26)
Show source-provided references
1. 10.1016/j.compstruct.2014.06.00910.1016/j.compstruct.2014.06.009 ↗
2. 10.1016/j.compstruct.2013.07.00410.1016/j.compstruct.2013.07.004 ↗
3. 10.1016/j.compstruct.2015.07.05910.1016/j.compstruct.2015.07.059 ↗
4. Cheng J · J Reinf Plast Compos · 2017 · 3610.1177/0731684416680456 ↗
5. 10.1007/s12221-015-5447-y10.1007/s12221-015-5447-y ↗
6. Miaris A, Paessler M, Lichtner J, et al. Siphon impregnation: the development of a new method for impregnation during filament winding. In: Proceedings of the ICCM , Edinburgh, United kingdom, 27–31 July 2009, p. 17. Canada: ICCM.
7. Miaris A, Paessler M, Schledjewski R, et al. Modeling the impregnation process of a siphon impregnation system during filament winding. In: ASME 2011 pressure vessels and piping conference , American Society of Mechanical Engineers, Baltimore, USA, 17–21 July, 2011, pp. 79–87. New York, USA: ASME.10.1115/PVP2011-57543 ↗
8. 10.1177/089270570604956110.1177/0892705706049561 ↗
9. Finkenwerder FA · Adv Manuf Polym Compos Sci · 2016 · 2 · 103
10. 10.1016/j.compstruct.2011.11.02710.1016/j.compstruct.2011.11.027 ↗
11. 10.1016/j.compstruct.2017.03.09410.1016/j.compstruct.2017.03.094 ↗
12. 10.1016/j.compositesa.2010.12.00210.1016/j.compositesa.2010.12.002 ↗
13. 10.1016/j.jmatprotec.2015.10.01310.1016/j.jmatprotec.2015.10.013 ↗
14. 10.1007/s00170-017-0049-z10.1007/s00170-017-0049-z ↗
15. Toptas E and · Int J Adv Manuf Technol · 2017
16. 10.1080/1042691060074601510.1080/10426910600746015 ↗
17. Hazra T, Gu J and, Taheri F. An innovative cost effective approach towards tension control in automated filament winding composite manufacturing. In: 2011 international conference on mechatronics and automation (ICMA) , Beijing, China, 7–10 August, 2011. NJ, USA: IEEE.10.1109/ICMA.2011.5985790 ↗
18. Wang Q, Zou W, Xu D, et al. Analysis on the influence factors of fiber tension in fiber placement. In: 2016 Chinese control and decision conference (CCDC) , Yinchuan, China, 28–30 May, 2016. USA: IEEE.10.1109/CCDC.2016.7531158 ↗
19. Engelfried M, Fial J, Tartler M, et al. A mesoscopic approach for draping simulation of preforms manufactured by direct fibre placement. In: AIP conference proceedings , vol. 1896, Dublin, Ireland, 26–28 April 2017, p. 030016. USA: AIP Publishing.10.1063/1.5008003 ↗
20. 10.1177/073168441667574710.1177/0731684416675747 ↗
21. 10.1177/00405175930630080610.1177/004051759306300806 ↗
22. 10.1016/S0043-1648(99)00293-810.1016/S0043-1648(99)00293-8 ↗
23. 10.1016/j.compscitech.2014.05.02710.1016/j.compscitech.2014.05.027 ↗
24. 10.1007/s10973-015-5090-210.1007/s10973-015-5090-2 ↗
25. 10.1016/j.compositesa.2011.04.01010.1016/j.compositesa.2011.04.010 ↗
26. 10.1177/002199831347632010.1177/0021998313476320 ↗