Effect of phosphoric acid molarity on the structural, thermal, mechanical, and electrical properties of polyimide/polyaniline nanocomposites
Source abstract
Abstract
In this paper, we used two monomers, 3,3',4,4'-benzophenone tetracarboxylic dianhydride (BTDA) and m,m'-diaminobenzophenone (m, m’-DABP), to produce polyamide acid and then converted it to polyimide (PI). The effects of phosphoric acid (H 3 PO 4 ) molarity (1, 2, and 3 M) on the structural, thermal, mechanical, and electrical characteristics of the polyimides/polyaniline (PI/PANI) nanocomposites were studied. Two sharp reflection peaks were developed by the addition of PANI to PI. When 3 M H 3 PO 4 is added, the crystalline sharp peak loses some of its intensity. The complex formation of PI/PANI-H 3 PO 4 was confirmed by Fourier transform infrared spectroscopy studies. The surface morphologies of the H 3 PO 4 complex with nanocomposites were investigated by using a scanning electron microscope. From differential scanning calorimetry studies, the glass transition temperatures of nanocomposites decrease dramatically with an increase in H 3 PO 4 . Microhardness, flexural strength, and young modulus all dropped as acid molarity increased, although elongation at break increased as H 3 PO 4 molarity increased. After the addition of H 3 PO 4 , a drop in the dielectric constant and an increase in ionic conductivity were observed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Physics, College of Science, University of Baghdad, Baghdad, Iraq
Department of Physics, BVRIT HYDERABAD College of Engineering for Women, Hyderabad, India
References (35)
Show source-provided references
1. 10.2478/msp-2019-008110.2478/msp-2019-0081 ↗
2. 10.24996/ijs.2020.61.12.1210.24996/ijs.2020.61.12.12 ↗
3. 10.1016/j.compstruct.2020.11330510.1016/j.compstruct.2020.113305 ↗
4. 10.1007/BF0321906410.1007/BF03219064 ↗
5. 10.1515/joc-2018-002410.1515/joc-2018-0024 ↗
6. 10.1016/j.apsusc.2019.06.17110.1016/j.apsusc.2019.06.171 ↗
7. Kareem AA · Polym Polym Compos · 2022 · 30 · 1
8. 10.1016/j.synthmet.2003.12.01610.1016/j.synthmet.2003.12.016 ↗
9. 10.1039/D0RA07800J10.1039/D0RA07800J ↗
10. 10.1021/ja301061a10.1021/ja301061a ↗
11. 10.1016/j.polymer.2014.05.02410.1016/j.polymer.2014.05.024 ↗
12. 10.1002/anie.20046061610.1002/anie.200460616 ↗
13. 10.1016/j.mseb.2006.07.03710.1016/j.mseb.2006.07.037 ↗
14. 10.1134/S107042721407011810.1134/S1070427214070118 ↗
15. 10.1021/acssensors.8b0058910.1021/acssensors.8b00589 ↗
16. kumar NM · Indian J Chem Technol · 2012 · 19 · 434
17. 10.1007/s00289-021-03830-710.1007/s00289-021-03830-7 ↗
18. 10.1007/s00289-018-2649-710.1007/s00289-018-2649-7 ↗
19. 10.2478/msp-2018-004710.2478/msp-2018-0047 ↗
20. 10.1177/152808371769259210.1177/1528083717692592 ↗
21. 10.1021/jp311471f10.1021/jp311471f ↗
22. 10.1016/j.compositesb.2011.11.03110.1016/j.compositesb.2011.11.031 ↗
23. 10.1515/ijcre-2019-008810.1515/ijcre-2019-0088 ↗
24. 10.1080/00914037.2014.88622010.1080/00914037.2014.886220 ↗
25. 10.1016/j.matlet.2013.10.07510.1016/j.matlet.2013.10.075 ↗
26. 10.1016/j.rinp.2018.02.00810.1016/j.rinp.2018.02.008 ↗
27. 10.1007/s42452-021-04182-710.1007/s42452-021-04182-7 ↗
28. 10.1039/c2jm34529c10.1039/c2jm34529c ↗
29. Jiang Q · J Reinforced Plastics Compos · 2015 · 35 · 1
30. Sharmin K · J Elastomers Plastics · 2012 · 46 · 1
31. 10.1177/073168441558855110.1177/0731684415588551 ↗
32. 10.24996/ijs.2021.62.11(SI).810.24996/ijs.2021.62.11(SI).8 ↗
33. 10.1177/073168441140445710.1177/0731684411404457 ↗
34. 10.1002/app.2576310.1002/app.25763 ↗
35. Rashid IA · J Reinforced Plastics Compos · 2021 · 41 · 1