Improved mechanical performance of three-dimensional woven glass/epoxy spacer composites with carbon nanotubes
Source abstract
Abstract
Three-dimensional polymer composites offer various features and design options due to their hollow structure and lightweight. However, to exploit their advantages, it is a must to improve their structural features and mechanical performances including out-plane direction. Although introducing thermoplastic fillers between the plies or multilayered design addresses on this critical issue, the benefits offered by the nanoparticles with superior mechanical properties come a step forward as an another engineering solution. Based on this motivation, the goal of this study is to investigate the impact of multiwalled carbon nanotubes on the mechanical and thermomechanical performances of three-dimensional woven glass/epoxy spacer composites. Therefore, multiwalled carbon nanotubes at various content were introduced into epoxy matrix, and the multiwalled carbon nanotubes–epoxy mixture was infused to three-dimensional woven fabric with the vacuum-assisted resin transfer method. The obtained results indicated that the three-point bending strength and modulus were enhanced up to 25 and 80% for warp direction and enhanced up to 44 and 85% for weft direction with carbon nanotube addition, respectively. Tensile strength developed in the warp direction by 7%, while the strength value in the weft direction did not change. The tensile strain values for warp and weft directions enhanced up to 19 and 12% with carbon nanotube addition, respectively. In addition, thermomechanical analysis has revealed that the glass transition temperature and storage modulus were also improved. Particle dispersion detection with color measurement and scanning electron microscopy analyses revealed the effectiveness of the ultrasonic mixing on the dispersion of carbon nanotubes in the epoxy matrix. The consequences of carbon nanotube addition on microscale morphology were discussed based on the fracture morphologies to nanoscale and microscale toughening mechanisms in the existence of carbon nanotube reinforcement.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Mechanical Behavior of Composites · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Machinery and Metal Technologies Department, Biga Vocational School, Çanakkale Onsekiz Mart University, Çanakkale, Turkey
Mechanical Engineering Department, Hasan Ferdi Turgutlu Technology Faculty, Manisa Celal Bayar University, Manisa, Turkey
Biomedical Engineering Department, Engineering and Architecture Faculty, Necmettin Erbakan University, Konya, Turkey
References (64)
Show source-provided references
1. 10.1016/j.matdes.2013.10.08310.1016/j.matdes.2013.10.083 ↗
2. 10.1016/j.compositesa.2016.09.01710.1016/j.compositesa.2016.09.017 ↗
3. 10.1016/j.compositesa.2019.01.02310.1016/j.compositesa.2019.01.023 ↗
4. 10.1016/j.compositesb.2018.10.03610.1016/j.compositesb.2018.10.036 ↗
5. 10.1016/j.compscitech.2013.07.02810.1016/j.compscitech.2013.07.028 ↗
6. 10.1016/j.compstruct.2013.12.02610.1016/j.compstruct.2013.12.026 ↗
7. 10.1007/s10443-008-9072-410.1007/s10443-008-9072-4 ↗
8. 10.1016/j.compositesb.2013.06.03010.1016/j.compositesb.2013.06.030 ↗
9. 10.1016/j.compscitech.2012.04.01710.1016/j.compscitech.2012.04.017 ↗
10. 10.1016/j.compositesb.2010.07.00410.1016/j.compositesb.2010.07.004 ↗
11. Bilişik K, Yolaçan G. Flexural properties of woven e-glass/polyester nano silica composites, XIII. In: International İzmir Textile and Clothing Symposium, Antalya, Turkey, 2–5 April 2014, pp. 229–234.
12. 10.1016/j.mspro.2014.07.11510.1016/j.mspro.2014.07.115 ↗
13. 10.1016/j.carbon.2010.06.01010.1016/j.carbon.2010.06.010 ↗
14. 10.1016/j.compositesa.2005.02.00710.1016/j.compositesa.2005.02.007 ↗
15. 10.1016/j.msea.2006.04.03110.1016/j.msea.2006.04.031 ↗
16. 10.1021/la062743p10.1021/la062743p ↗
17. 10.1016/j.compositesa.2010.06.00210.1016/j.compositesa.2010.06.002 ↗
18. 10.1016/j.compositesb.2017.12.01310.1016/j.compositesb.2017.12.013 ↗
19. 10.1016/j.compstruct.2010.05.00310.1016/j.compstruct.2010.05.003 ↗
20. 10.1016/j.compscitech.2014.08.01610.1016/j.compscitech.2014.08.016 ↗
21. 10.1016/j.compscitech.2010.04.01010.1016/j.compscitech.2010.04.010 ↗
22. 10.1016/j.compstruct.2012.03.01410.1016/j.compstruct.2012.03.014 ↗
23. 10.1016/j.msea.2006.07.10610.1016/j.msea.2006.07.106 ↗
24. 10.1016/j.progpolymsci.2010.03.00210.1016/j.progpolymsci.2010.03.002 ↗
25. 10.1016/S0266-3538(01)00094-X10.1016/S0266-3538(01)00094-X ↗
26. 10.1080/09243046.2015.105218810.1080/09243046.2015.1052188 ↗
27. 10.1016/j.compositesb.2016.04.03110.1016/j.compositesb.2016.04.031 ↗
28. 10.1016/j.compositesb.2012.09.06310.1016/j.compositesb.2012.09.063 ↗
29. 10.1016/j.compositesb.2016.07.01110.1016/j.compositesb.2016.07.011 ↗
30. 10.1016/j.compositesb.2016.10.03210.1016/j.compositesb.2016.10.032 ↗
31. Salam MBA · J Compos Mater · 2013 · 3 · 1
32. 10.1016/j.compscitech.2005.04.02110.1016/j.compscitech.2005.04.021 ↗
33. 10.1016/j.powtec.2016.05.05210.1016/j.powtec.2016.05.052 ↗
34. 10.3139/146.11147910.3139/146.111479 ↗
35. 10.1016/j.compositesb.2011.03.00810.1016/j.compositesb.2011.03.008 ↗
36. 10.1016/j.msea.2007.03.06410.1016/j.msea.2007.03.064 ↗
37. 10.1016/S1359-835X(00)00017-810.1016/S1359-835X(00)00017-8 ↗
38. 10.1016/j.compositesb.2011.08.03410.1016/j.compositesb.2011.08.034 ↗
39. Parabeam 3-d Glass Fabrics. Technical data sheet. https://romar-voss.nl/archief/Composites/kern/pdf/Parabeam%203-D%20glasweefsel%201/ParaGlass/Technical%20Data%20Sheet%20Metric.pdf (accessed 27 September 2020).
40. 10.1016/j.polymer.2006.11.03810.1016/j.polymer.2006.11.038 ↗
41. 10.1016/j.compscitech.2014.09.00710.1016/j.compscitech.2014.09.007 ↗
42. 10.3144/expresspolymlett.2008.610.3144/expresspolymlett.2008.6 ↗
43. 10.1016/j.compscitech.2014.07.00610.1016/j.compscitech.2014.07.006 ↗
44. 10.1016/j.compositesa.2009.07.00510.1016/j.compositesa.2009.07.005 ↗
45. 10.1016/j.compositesb.2013.07.01010.1016/j.compositesb.2013.07.010 ↗
46. 10.1016/j.powtec.2015.07.05010.1016/j.powtec.2015.07.050 ↗
47. Koynov S · Technol · 2016 · 292 · 298
48. User manual of the color measurement device. 2014, http://mepteknik.com/bg/assets/images/kkilavuz/RENK%20OLCUM%20CIHAZI%20KULLANMA%20KILAVUZU.pdf, (accessed 12 March 2020).
49. Ülkü S, Korkmaz B. Farklı Kompozisyonlardaki Polyesterin Mekanik Özelliklerinin Yapıya Bağlı Olarak Deneysel ve Teorik Olarak İncelenmesi. In: Balıkesir Symposium, Turkey, 1988.
50. 10.1016/j.compscitech.2004.04.00210.1016/j.compscitech.2004.04.002 ↗
51. 10.1016/j.msea.2007.04.04310.1016/j.msea.2007.04.043 ↗
52. 10.1016/j.compscitech.2005.04.00210.1016/j.compscitech.2005.04.002 ↗
53. 10.1016/j.compositesa.2009.04.02110.1016/j.compositesa.2009.04.021 ↗
54. 10.1016/j.compscitech.2016.12.02010.1016/j.compscitech.2016.12.020 ↗
55. Ashby MF. Material Selection in Mechanical Design. 2nd ed. Oxford, England: Butterworth-Heinemann, 1999, pp. 43–44.
56. WangQ, WangX, SunDL, et al. Study on dimensional stability of SiCp/Al composite, JO - ECCM 2012 - composites at Venice. In: Proceedings of the 15th European Conference on Composite Materials, Venice, January 2012.
57. 10.1016/j.indcrop.2015.08.05610.1016/j.indcrop.2015.08.056 ↗
58. Abdalla FH · J Eng Appl Sci · 2008 · 4 · 7
59. 10.1016/0010-4361(95)91140-Z10.1016/0010-4361(95)91140-Z ↗
60. 10.1177/002199831877215210.1177/0021998318772152 ↗
61. Daniel IM · 2006
62. 10.1016/j.msea.2007.08.05010.1016/j.msea.2007.08.050 ↗
63. 10.1016/j.matdes.2010.01.05110.1016/j.matdes.2010.01.051 ↗
64. 10.1016/j.jiec.2011.11.14010.1016/j.jiec.2011.11.140 ↗