Inorganic Particle Size and Content Effects on Tensile Strength of Polymer Composites
Source abstract
Abstract
The influence of inorganic filler particle size and content on tensile strength of polymer composites was discussed in this paper. Based on an interfacial model between inclusion and matrix and the work by Turcsanyi et al., an expression of interfacial adhesion parameter B was proposed, and a new tensile strength equation considering particle diameter effect for polymer composites was derived. A polypropylene (PP) filled with diatomite was fabricated by means of a twin-screw extruder, and the tensile mechanical properties were measured at room temperature to identify the effects of the filler diameter and content on the tensile mechanical properties of these composites. It was found that the tensile strength of these composite systems decreased slightly with an increase of the filler diameter. This equation was initially verified by using these measured data of tensile strength of the PP/diatomite composites. The results show that the predictions were close to the measured data of tensile strength, and the maximum relative errors between them were within 10%.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Asphalt Pavement Performance Evaluation · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical and Automobile Engineering, South China University of Technology, Guangzhou 510640, P.R. China,
School of Mechanical and Automobile Engineering, South China University of Technology, Guangzhou 510640, P.R. China
References (22)
Show source-provided references
1. Hristov, V. · Mater. Eng. · 2006 · 291 · 677
2. 10.1007/s10853-006-7171-x10.1007/s10853-006-7171-x ↗
3. 10.1002/masy.20045100910.1002/masy.200451009 ↗
4. Liang, J.Z. · Compos. · 1999 · 20 · 413
5. 10.1007/BF0116599810.1007/BF01165998 ↗
6. 10.1002/(SICI)1097-4628(19970906)65:10<2013::AID-APP19>3.0.CO;2-610.1002/(SICI)1097-4628(19970906)65:10<2013::AID-APP19>3.0.CO;2-6 ↗
7. 10.1016/j.colsurfa.2005.09.02910.1016/j.colsurfa.2005.09.029 ↗
8. 10.1002/masy.20065022010.1002/masy.200650220 ↗
9. Hui, C.Y. · Eng. Sci. · 1998 · 38 · 774
10. 10.1016/j.msea.2005.06.02610.1016/j.msea.2005.06.026 ↗
11. Liang, J.Z. · Test. · 2007 · 26 · 1025
12. 10.2118/83915-PA10.2118/83915-PA ↗
13. 10.1007/s11148-005-0077-310.1007/s11148-005-0077-3 ↗
14. 10.1061/(ASCE)1090-0241(2006)132:5(603)10.1061/(ASCE)1090-0241(2006)132:5(603) ↗
15. 10.1007/BF0240323410.1007/BF02403234 ↗
16. Vollenberg, P. · Compos. · 1988 · 9 · 382
17. 10.1177/07316840177267899510.1177/073168401772678995 ↗
18. Nicolais, L. · Eng. Sci. · 1971 · 11 · 194
19. 10.1007/BF0173060510.1007/BF01730605 ↗
20. Liang, J.Z. · Rubber Indust. · 1999 · 22 · 285
21. Wu, X.S. · Mater. · 1985 · 2 · 41
22. Pukanszky, B. , Turcsanyi, B. and Tudos, F. (1988). Interfaces in Polymer, Ceramic, and Metal Matrix Composites, pp. 467-477, Elsevier , New York.