journal article·2019-05

Influence of ply angle and length on buckling behavior of composite shells under hydrostatic pressure

Ranfeng Wei, Guang Pan, Jun Jiang, Kechun Shen

Publisher page

Abstract

This paper is devoted to the buckling problem of the composite cylindrical shell subjected to hydrostatic pressure. Both analytical and numerical methods are applied to investigate the buckling behavior. Based on the study of analytical formulas, it is found that the composite cylindrical shells with the same length-to-diameter ratio, diameter-to-thickness ratio, and type of layup have the same buckling pressure. Thus, a scale model experiment method is then proposed, which uses the scale model to replace the full-scale model in pressure test experiment to reduce the manufacturing cost of the test specimen. The feasibility of this method is verified by numerical calculation. The influences of ply orientation angle and length of shell on buckling shape and critical buckling pressure have been investigated numerically and demonstrated by several examples. Based on the study of the influence of shell length on critical buckling pressure, a modified finite element model, which can overcome the conservatism of optimization result due to the stress concentration caused by boundary conditions, is combined with the genetic algorithm to optimize the laminations for mass reduction.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Composite Structure Analysis and Optimization · Structural Analysis and Optimization · Topology Optimization in Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Marine Science and Technology, Northwestern Polytechnical University, Xi’an, PR China

Key Laboratory for Unmanned Underwater Vehicle, Xi’an, PR China

Funding

National Natural Science Foundation of China · National Key Research and Development Project of China · Natural Science Basic Research Plan in Shaanxi Province of China

References (31)

Show source-provided references
1. Davies P · J Press Vess Technol-Trans ASME · 2016 · 138
2. 10.1016/j.oceaneng.2016.10.03110.1016/j.oceaneng.2016.10.031 ↗
3. 10.1016/j.compstruct.2018.03.06310.1016/j.compstruct.2018.03.063 ↗
4. Shen KC · Sci Eng Compos Mater · 2017
5. 10.1016/j.compstruct.2008.03.02810.1016/j.compstruct.2008.03.028 ↗
6. Donnell LH. · 1933
7. 10.2472/jsms.38.137810.2472/jsms.38.1378 ↗
8. Koiter WT. The stability of elastic equilibrium . Thesis, Stanford University, USA, 1970.
9. 10.1007/978-3-642-88291-310.1007/978-3-642-88291-3 ↗
10. Kasuya H · Trans Jpn Soc Aeronaut Space Sci Jpn · 1982 · 30 · 664
11. 10.1016/j.compstruct.2017.03.10910.1016/j.compstruct.2017.03.109 ↗
12. 10.1016/j.tws.2014.09.01410.1016/j.tws.2014.09.014 ↗
13. 10.1016/j.compstruct.2011.05.02010.1016/j.compstruct.2011.05.020 ↗
14. 10.1016/S0263-8223(02)00162-910.1016/S0263-8223(02)00162-9 ↗
15. 10.1016/j.tws.2015.05.01710.1016/j.tws.2015.05.017 ↗
16. Li B · Int J Naval Archit Ocean Eng · 2016 · 9 · 1
17. 10.1115/1.292878210.1115/1.2928782 ↗
18. 10.1016/j.tws.2017.03.00910.1016/j.tws.2017.03.009 ↗
19. 10.1016/j.compstruct.2012.08.05510.1016/j.compstruct.2012.08.055 ↗
20. 10.1155/2014/98790310.1155/2014/987903 ↗
21. 10.1016/S1359-8368(02)00106-310.1016/S1359-8368(02)00106-3 ↗
22. 10.1016/S1359-8368(00)00063-910.1016/S1359-8368(00)00063-9 ↗
23. 10.1007/s12541-010-0110-410.1007/s12541-010-0110-4 ↗
24. 10.1016/S0263-8223(99)00133-610.1016/S0263-8223(99)00133-6 ↗
25. 10.1016/j.compscitech.2007.07.02010.1016/j.compscitech.2007.07.020 ↗
26. 10.1016/j.compstruct.2009.08.00510.1016/j.compstruct.2009.08.005 ↗
27. 10.1016/j.tws.2015.04.02410.1016/j.tws.2015.04.024 ↗
28. 10.1016/j.compositesb.2017.09.06510.1016/j.compositesb.2017.09.065 ↗
29. Lemanh T, Lee J. Stacking sequence optimization for maximum strengths of laminated composite plates using genetic algorithm and isogeometric analysis. Наука, 2014.10.1016/j.compstruct.2014.05.011 ↗
30. Jones RM. · 2014
31. Davies P, Chauchot P. Composites for marine applications. In: Soares CAM, et al. (eds) Mechanics of composite materials and structures . New York: Springer, 1999, pp. 249–260.10.1007/978-94-011-4489-6_13 ↗