journal article·2017-07

Energy Absorption Capability of Axially Compressed Woven Natural Ramie/Green Epoxy Square Composite Tubes

Majid J Ghoushji, Rahim A Eshkoor, Rozli Zulkifli, Abu B Sulong, Shahrum Abdullah, Che H Azhari

Publisher page

Abstract

This study focuses on failure response and energy absorption of woven ramie epoxy square composite tubes when exposed to the axial quasi-static compression test. Hand lay-up technique was used to prepare the rectangular composite tubes composed of 12 layers of ramie fabric with a thickness of 1.7 mm and 50-, 80-, and 120-mm-long tubes. The measured parameters were specific energy absorption, energy absorption, and peak load. The total energy absorption increased with the increase in the length of the tubes. The failure mode of the tested tubes was examined, and the mid-length and local buckling were considered as the main sources of failure. The woven natural ramie was used in the textiles for years. However, the results of this paper can be significant because of the limited research employing woven ramie as reinforcement for composites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Textile materials and evaluations · Tree Root and Stability Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical and Materials Engineering, Faculty of Engineering, Universiti Kebangsaan Malaysia, Malaysia

References (28)

Show source-provided references
1. 10.1016/j.compstruct.2004.07.02110.1016/j.compstruct.2004.07.021 ↗
2. 10.1177/073168441558893810.1177/0731684415588938 ↗
3. 10.1177/002199830203600716410.1177/0021998302036007164 ↗
4. 10.1002/app.2033610.1002/app.20336 ↗
5. 10.1016/j.compstruct.2012.09.05210.1016/j.compstruct.2012.09.052 ↗
6. 10.1177/073168441349532210.1177/0731684413495322 ↗
7. 10.1016/j.compositesb.2009.04.01410.1016/j.compositesb.2009.04.014 ↗
8. Wallenberger FT · 2003
9. 10.1007/BF0287576910.1007/BF02875769 ↗
10. 10.1002/(SICI)1439-2054(20000301)276:1<1::AID-MAME1>3.0.CO;2-W10.1002/(SICI)1439-2054(20000301)276:1<1::AID-MAME1>3.0.CO;2-W ↗
11. Nakamura R · Int J Plast Technol · 2005 · 9 · 406
12. 10.1016/j.ijimpeng.2013.09.00410.1016/j.ijimpeng.2013.09.004 ↗
13. Irawan AP · Int J Mech Mater Eng · 2011 · 6 · 46
14. 10.1016/S0997-7538(00)00158-310.1016/S0997-7538(00)00158-3 ↗
15. 10.1177/073168441665457910.1177/0731684416654579 ↗
16. 10.1016/j.compositesb.2015.03.01710.1016/j.compositesb.2015.03.017 ↗
17. 10.1177/00219983920260010510.1177/002199839202600105 ↗
18. 10.1016/j.compstruct.2004.06.00210.1016/j.compstruct.2004.06.002 ↗
19. 10.1016/S0263-8223(03)00183-110.1016/S0263-8223(03)00183-1 ↗
20. 10.1016/0266-3538(91)90031-J10.1016/0266-3538(91)90031-J ↗
21. 10.1080/1358826090348875010.1080/13588260903488750 ↗
22. 10.1179/174329307X24934210.1179/174329307X249342 ↗
23. 10.1016/j.compositesb.2016.05.04810.1016/j.compositesb.2016.05.048 ↗
24. 10.1016/j.matdes.2012.11.03010.1016/j.matdes.2012.11.030 ↗
25. 10.1016/j.compstruct.2004.06.00110.1016/j.compstruct.2004.06.001 ↗
26. 10.1016/j.compstruct.2012.03.03110.1016/j.compstruct.2012.03.031 ↗
27. 10.1016/j.tws.2013.04.00310.1016/j.tws.2013.04.003 ↗
28. 10.1177/073168440809777910.1177/0731684408097779 ↗