journal article·2015-12

Strength and deformation characteristics of engineered cementitious composite slabs with different polymer fibres

Shwan H Said, Hashim A Razak, Ismail Othman

Publisher page

Abstract

This paper presents a study on the compressive and flexural strength of engineered cementitious composite (ECC) cubes and slabs, reinforced with various polymer fibres. The type of fibre, fibre content and aspect ratio were the parameters considered in this study. For all types of fibre, the compressive strength of the ECC decreased as the reinforcing index increased. For the ECC polypropylene fibre (PP) slabs, the first crack strength significantly decreased with an increase in the fibre content. For the ECC polyethylene fibre (PE) slabs, the first crack strength decreased as the reinforcing index increased. For the ECC PE slabs, the usage of PE 1600D fibres showed a substantial increase in flexural strength due to their higher tensile strength and E modulus. The ECC PP slabs behaved like plane concrete due to the zero value of flexural strength, which was attributed to the weak interfacial bonding with the cement matrix, low tensile strength and E modulus of the PP fibres. The highest ductility was observed for the ECC-PE slabs with the highest recorded deflection values; these values achieved many extended multiple cracks and an extensive area under the load–deflection curve indicating high energy absorption capacity.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Engineering, StrucHMRS Group, Dept. of Civil Engineering, University of Malaya, Malaysia

Depatment of Civil Techniques, Kirkuk Technical Institute, Northern Technical University, Foundation of Technical Education, Baghdad, Iraq

References (29)

Show source-provided references
1. Li VC · 2008
2. Lepech MD · ACI Mater J · 2008 · 105 · 358
3. Li VC. Advances in ECC research. Material science to application – A tribute to Surendra P Shah , Volume 206, ACI Publication, Farmington Hills, MI: ACI Special, 2002, pp.373–400.
4. 10.1061/(ASCE)0899-1561(1998)10:2(66)10.1061/(ASCE)0899-1561(1998)10:2(66) ↗
5. Wang S · ACI Mater J · 2007 · 104 · 233
6. Yang EH · ACI Mater J · 2007 · 104 · 620
7. Naaman AE · 1996 · 1
8. Li VC · J Struct Mech Earthquake Eng JSCE · 1993 · 10 · 37
9. 10.3151/jact.1.21510.3151/jact.1.215 ↗
10. 10.1533/9780857093103.2910.1533/9780857093103.29 ↗
11. 10.1016/j.engfracmech.2011.06.00310.1016/j.engfracmech.2011.06.003 ↗
12. 10.1007/s11431-012-4990-710.1007/s11431-012-4990-7 ↗
13. 10.1007/BF0247319110.1007/BF02473191 ↗
14. 10.1617/s11527-012-9890-610.1617/s11527-012-9890-6 ↗
15. Shao Y · ACI Mater J · 1997 · 94 · 555
16. Li VC · ACI Mater J Am Concrete Inst · 2002 · 99 · 11
17. Fischer G · ACI Struct J · 2003 · 100 · 25
18. 10.1061/(ASCE)0899-1561(1994)6:4(513)10.1061/(ASCE)0899-1561(1994)6:4(513) ↗
19. Maalej M · ACI Struct J · 1995 · 92 · 167
20. Minard A. Bendable concrete heals itself-just add water. National Geographic News, National Geographic ed , National Geographic Society, 2009.
21. Wafa MA and Fukuzawa K. Characteristics of ferrocement thin composite elements using various reinforcement meshes in flexure. J Reinf Plast Compos 2010; 29: 3530-3539.10.1177/0731684410377814 ↗
22. 10.1177/073168441349829710.1177/0731684413498297 ↗
23. 10.1177/073168441351478510.1177/0731684413514785 ↗
24. 10.1061/(ASCE)MT.1943-5533.000080510.1061/(ASCE)MT.1943-5533.0000805 ↗
25. Zhou J. Performance of engineered cementitious composites for concrete repairs . Delft, The Netherlands: Delft University of Technology, 2011.
26. 10.1016/S0958-9465(00)00042-110.1016/S0958-9465(00)00042-1 ↗
27. 10.1515/rbm-2006-604010.1515/rbm-2006-6040 ↗
28. Balaguru P · ACI Mater J · 1992 · 89 · 541
29. Banthia N · ACI Mater J · 1995 · 92 · 48