Reinforced performances of polymethyl methacrylate/silica fume composite spherical particles used as ultra-lightweight proppants
Source abstract
Abstract
Polymethyl methacrylate/silica fume composite particles with different silica fume contents were prepared via in situ suspension polymerization. Morphological, mechanical, acid resisting, and thermal performances of the synthesized material were investigated. The results revealed that the polymethyl methacrylate/silica fume composite particles presented 0.6–0.9 mm sphericity in diameter. When the contents of silica fume were about between 20 and 50 wt%, the measurements of apparent density (1.072–1.156 g/cm 3 ) were obviously lower than its theoretical values (1.163–1.278 g/cm 3 ) due to abundant micron-sized macropores (>50 nm) existing inside the composite particles. Furthermore, the crushing rate and acid solubility of composite particles were all less than 5%, which reached the requirements of the standard of SY/T 5108-2006. With increasing the silica fume content from 0 to 60 wt%, the T g of the composite particles increased from 105.21 to 223.50℃, and the mass loss decreased from 24.46 to 4.25% as the temperature increased to 400℃. The reinforced performances including of spherical millimetric size, light weight, high strength, good acid resistance, and excellent thermal stability confirmed that the polymethyl methacrylate/silica fume composite particles have a great potential application as proppants in petroleum and gas exploration.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Spacecraft and Cryogenic Technologies · Fluid Dynamics Simulations and Interactions · Enhanced Oil Recovery Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Material and Chemistry, China University of Geosciences, Wuhan, China
Engineering Research Center of Nano-Geomaterials, Ministry of Education, Faculty of Material and Chemistry, China University of Geosciences, Wuhan, China
References (39)
Show source-provided references
1. 10.1016/j.corsci.2012.06.02510.1016/j.corsci.2012.06.025 ↗
2. 10.1016/j.chemer.2010.05.01610.1016/j.chemer.2010.05.016 ↗
3. 10.1016/j.jhazmat.2014.04.04010.1016/j.jhazmat.2014.04.040 ↗
4. 10.1016/j.ijrmms.2014.04.01110.1016/j.ijrmms.2014.04.011 ↗
5. 10.1016/j.petrol.2010.07.00810.1016/j.petrol.2010.07.008 ↗
6. 10.1016/j.petrol.2012.06.01010.1016/j.petrol.2012.06.010 ↗
7. 10.1016/j.jhazmat.2008.03.03210.1016/j.jhazmat.2008.03.032 ↗
8. 10.1016/j.petrol.2012.08.00710.1016/j.petrol.2012.08.007 ↗
9. 10.1016/j.compscitech.2012.02.01710.1016/j.compscitech.2012.02.017 ↗
10. 10.1016/j.proenv.2012.01.28510.1016/j.proenv.2012.01.285 ↗
11. 10.1016/j.petrol.2010.08.00710.1016/j.petrol.2010.08.007 ↗
12. 10.1016/j.matlet.2012.10.12410.1016/j.matlet.2012.10.124 ↗
13. 10.1016/j.jpowsour.2013.05.04810.1016/j.jpowsour.2013.05.048 ↗
14. 10.1016/j.apenergy.2009.10.01110.1016/j.apenergy.2009.10.011 ↗
15. 10.1016/j.enbuild.2013.11.04610.1016/j.enbuild.2013.11.046 ↗
16. 10.1016/j.polymdegradstab.2014.03.03110.1016/j.polymdegradstab.2014.03.031 ↗
17. 10.1016/j.eurpolymj.2011.12.01510.1016/j.eurpolymj.2011.12.015 ↗
18. 10.1016/j.matlet.2014.04.04910.1016/j.matlet.2014.04.049 ↗
19. 10.1016/j.radmeas.2013.10.00910.1016/j.radmeas.2013.10.009 ↗
20. 10.1016/j.enbuild.2013.02.05310.1016/j.enbuild.2013.02.053 ↗
21. 10.1016/j.jcis.2010.08.06110.1016/j.jcis.2010.08.061 ↗
22. 10.1016/j.polymertesting.2007.11.00510.1016/j.polymertesting.2007.11.005 ↗
23. 10.1016/j.eurpolymj.2007.05.01110.1016/j.eurpolymj.2007.05.011 ↗
24. 10.1016/j.msec.2014.05.01610.1016/j.msec.2014.05.016 ↗
25. Specification and recommended testing practice for proppants used in hydraulic fracturing operations. The standards of petroleum and gas industry in China (SY/T 5108-2006).
26. 10.1016/j.apsusc.2014.03.13010.1016/j.apsusc.2014.03.130 ↗
27. 10.1016/j.colsurfb.2013.09.05110.1016/j.colsurfb.2013.09.051 ↗
28. 10.1016/j.matlet.2012.10.05010.1016/j.matlet.2012.10.050 ↗
29. 10.1016/j.ceramint.2012.06.04110.1016/j.ceramint.2012.06.041 ↗
30. 10.1016/j.compositesa.2013.02.01010.1016/j.compositesa.2013.02.010 ↗
31. 10.1016/j.compscitech.2012.11.01410.1016/j.compscitech.2012.11.014 ↗
32. Aboud RS and Melo RCB. Past technologies emerge due to lightweight proppant technology: case histories applied on mature fields. In: SPE 107184. Presented at the 2007 SPE Latin American and Caribbean Petroleum Engineering Conference Buenos Aires, Argentina, 15–18 April 2007.10.2118/107184-MS ↗
33. 10.1016/S0142-9418(03)00073-410.1016/S0142-9418(03)00073-4 ↗
34. 10.1016/j.gca.2009.08.02710.1016/j.gca.2009.08.027 ↗
35. 10.1016/j.jiec.2012.09.02010.1016/j.jiec.2012.09.020 ↗
36. 10.1016/j.matlet.2014.05.01010.1016/j.matlet.2014.05.010 ↗
37. 10.1016/j.matchemphys.2007.11.00310.1016/j.matchemphys.2007.11.003 ↗
38. 10.1016/j.cej.2012.04.00810.1016/j.cej.2012.04.008 ↗
39. 10.1016/j.matlet.2009.01.05610.1016/j.matlet.2009.01.056 ↗