A cohesive zone model for predicting the initiation of Mode II delamination in composites under cyclic loading
Source abstract
Abstract
A new approach for simulating delamination initiation under cyclic loading is proposed. This approach is based on the hysteresis cohesive zone modeling and the gradual degradation of interface properties. The initiation of delamination is predicted based on the monotonic traction–separation law of the interface. A damage criterion is proposed that depends on the bilinear traction–separation law and interlaminar stiffness is degraded by defining a damage parameter as a function of number of cycles and bilinear traction–separation law parameters. Numerical simulation is accomplished by implementing 2D finite element modeling for the case of double-notched specimen. Four-node zero-thickness interfacial cohesive elements are defined to capture the delamination behavior of midplane in the specimen. The results of numerical simulation are compared with available experimental data and a good agreement is observed. The main novelty of this research lies on assuming a cycle-by-cycle irreversible decrease in interlaminar stiffness prior to damage initiation and applying a damage criterion based on the bilinear traction–separation law in order to predict the number of cycles for initiation of delamination.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Fatigue and fracture mechanics · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Composites Research Laboratory, Faculty of New Science & Technologies, University of Tehran, Tehran, Iran
Funding
Iran National Science Foundation
References (54)
Show source-provided references
1. 10.1115/1.402764710.1115/1.4027647 ↗
2. ASTM, D6115 Standard test method for mode I fatigue delamination growth onset of unidirectional fiber-reinforced polymer matrix composites, ASTM International, West Conshohocken, PA, 2019.
3. Alderliesten RC. Fatigue crack propagation and delamination growth in Glare, PhD Thesis, Delft University of Technology, Delft, 2005.
4. 10.1088/1757-899X/388/1/01200210.1088/1757-899X/388/1/012002 ↗
5. 10.1016/j.compositesa.2014.04.00710.1016/j.compositesa.2014.04.007 ↗
6. 10.1016/j.compositesa.2018.04.01510.1016/j.compositesa.2018.04.015 ↗
7. 10.1016/j.engfracmech.2018.06.04310.1016/j.engfracmech.2018.06.043 ↗
8. 10.1016/j.engfracmech.2018.06.03010.1016/j.engfracmech.2018.06.030 ↗
9. 10.1299/jsmea.40.42310.1299/jsmea.40.423 ↗
10. 10.1520/CTR10914J10.1520/CTR10914J ↗
11. 10.1016/j.compositesa.2015.05.01610.1016/j.compositesa.2015.05.016 ↗
12. 10.1016/j.engfracmech.2006.03.01510.1016/j.engfracmech.2006.03.015 ↗
13. 10.1016/S0142-1123(01)00071-810.1016/S0142-1123(01)00071-8 ↗
14. 10.1016/0266-3538(87)90076-510.1016/0266-3538(87)90076-5 ↗
15. 10.1016/j.compositesa.2011.02.01310.1016/j.compositesa.2011.02.013 ↗
16. 10.1016/j.compositesa.2016.11.03010.1016/j.compositesa.2016.11.030 ↗
17. 10.1016/j.compscitech.2015.10.01110.1016/j.compscitech.2015.10.011 ↗
18. Yao L, Alderliesten R. Mode I fatigue delamination growth in composite laminates with fibre bridging-datasets, TU Delft – 4TU Centre for research data. 10.4121/UUID:6DA548F6-F801-41B4-8D88-DB9AE81F6913
19. 10.1016/j.ijfatigue.2017.06.00410.1016/j.ijfatigue.2017.06.004 ↗
20. 10.1016/j.compstruct.2017.05.07010.1016/j.compstruct.2017.05.070 ↗
21. 10.1016/j.compositesa.2004.07.00710.1016/j.compositesa.2004.07.007 ↗
22. 10.1016/j.compositesa.2011.11.01510.1016/j.compositesa.2011.11.015 ↗
23. Krueger R. Development and application of benchmark examples for mode II static delamination propagation and fatigue growth predictions, Langley Research Center, Technical Report No. NASA/CR-2011-217305, 2011.
24. Krueger R. Development of benchmark examples for delamination onset and fatigue growth prediction, Langley Research Center, Technical Report No. NASA/NF-1676L-11493, 2011.
25. 10.1016/j.compscitech.2007.09.01210.1016/j.compscitech.2007.09.012 ↗
26. 10.1016/j.ijfatigue.2015.07.00310.1016/j.ijfatigue.2015.07.003 ↗
27. 10.1016/0022-5096(60)90013-210.1016/0022-5096(60)90013-2 ↗
28. Barenblatt GI. The mathematical theory of equilibrium cracks in brittle fracture. In: Advances in applied mechanics 1962; 7: 55–129.10.1016/S0065-2156(08)70121-2 ↗
29. 10.1023/A:101083952292610.1023/A:1010839522926 ↗
30. 10.1016/S0020-7683(03)00076-310.1016/S0020-7683(03)00076-3 ↗
31. 10.1016/j.ijsolstr.2015.10.01510.1016/j.ijsolstr.2015.10.015 ↗
32. 10.1016/j.ijfatigue.2010.04.00610.1016/j.ijfatigue.2010.04.006 ↗
33. 10.1016/j.ijsolstr.2012.03.03410.1016/j.ijsolstr.2012.03.034 ↗
34. 10.1016/j.ijsolstr.2013.12.00910.1016/j.ijsolstr.2013.12.009 ↗
35. 10.1016/j.mee.2003.11.00910.1016/j.mee.2003.11.009 ↗
36. 10.1016/j.engfracmech.2006.01.00310.1016/j.engfracmech.2006.01.003 ↗
37. 10.1016/j.compscitech.2005.04.02610.1016/j.compscitech.2005.04.026 ↗
38. 10.1016/j.engfracmech.2011.05.01110.1016/j.engfracmech.2011.05.011 ↗
39. 10.1016/j.compositesa.2010.08.01510.1016/j.compositesa.2010.08.015 ↗
40. 10.1016/j.compstruct.2011.03.02210.1016/j.compstruct.2011.03.022 ↗
41. TK · 1984
42. 10.1177/07316844880070040310.1177/073168448800700403 ↗
43. Dávila CG, Rose CA, Murri GB, et al. Evaluation of fatigue damage accumulation functions for delamination initiation and propagation, Langley Research Center, Technical Report No. NASA/TP-2020-220584, 2020.
44. 10.1177/07316840177267874210.1177/073168401772678742 ↗
45. 10.1016/S0020-7683(00)00253-510.1016/S0020-7683(00)00253-5 ↗
46. 10.1016/j.ijfatigue.2012.03.01610.1016/j.ijfatigue.2012.03.016 ↗
47. 10.1016/j.compstruct.2016.02.06010.1016/j.compstruct.2016.02.060 ↗
48. Mandell JF, Meier U. Fatigue crack propagation in 0/90 E-glass/epoxy composites, In J. Hancock (Ed.), Fatigue of Composite Materials , (pp. 28–44), West Conshohocken, PA: ASTM International, 1975.10.1520/STP33163S ↗
49. 10.1016/j.engfracmech.2008.06.01910.1016/j.engfracmech.2008.06.019 ↗
50. 10.1016/j.cma.2006.06.02010.1016/j.cma.2006.06.020 ↗
51. 10.1016/j.scriptamat.2005.07.01510.1016/j.scriptamat.2005.07.015 ↗
52. ASTM D3846-08, Standard test method for in-plane shear strength of reinforced plastics . ASTM International, West Conshohocken, PA, 2008.
53. 10.1016/j.compositesa.2007.11.00510.1016/j.compositesa.2007.11.005 ↗
54. 10.1016/j.engfracmech.2017.05.02110.1016/j.engfracmech.2017.05.021 ↗