Contribution of carbon nanotubes to vibration damping behavior of epoxy and its carbon fiber composites
Source abstract
Abstract
The main objective of this study was to investigate contribution of the non-functionalized multi-walled carbon nanotubes on the vibration damping behavior of first neat epoxy resin and then unidirectional and bidirectional continuous carbon fiber reinforced epoxy matrix composites. Epoxy/carbon nanotubes nanocomposites were produced by ultrasonic solution mixing method, while the continuous carbon fiber reinforced composite laminates were obtained via resin-infusion technique. Vibration analysis data of the specimens were evaluated by half-power bandwidth method; and the mechanical properties of the specimens were determined with three-point bending flexural tests, including morphological analyses under scanning electron microscopy. It was generally concluded that when even only 0.1 wt% carbon nanotubes were incorporated into neat epoxy resin, they have contributed not only to the mechanical properties (flexural strength and modulus), but also to the vibration behavior (damping ratio) of the epoxy. When 0.1 or 0.5 wt% carbon nanotubes were incorporated into continuous carbon fiber reinforced epoxy matrix composites, although they have no additional contribution to the mechanical properties, their contribution in terms of damping ratio of the composites were significant.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Tribology and Wear Analysis · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials and Metallurgical Engineering, Middle East Technical University, Ankara, Turkey
Faculty of Aeronautics and Astronautics, Ankara Yildirim Beyazit University, Ankara, Turkey
References (34)
Show source-provided references
1. 10.1016/j.compositesa.2013.04.01110.1016/j.compositesa.2013.04.011 ↗
2. 10.1016/j.compositesa.2014.10.00810.1016/j.compositesa.2014.10.008 ↗
3. 10.1016/j.compscitech.2009.06.02010.1016/j.compscitech.2009.06.020 ↗
4. 10.1016/S0263-8223(98)00073-710.1016/S0263-8223(98)00073-7 ↗
5. 10.1016/j.compositesb.2015.03.08110.1016/j.compositesb.2015.03.081 ↗
6. 10.1177/073168441665248810.1177/0731684416652488 ↗
7. 10.1016/j.cja.2015.09.00110.1016/j.cja.2015.09.001 ↗
8. 10.1016/j.compstruct.2014.05.04710.1016/j.compstruct.2014.05.047 ↗
9. 10.1016/j.compscitech.2017.03.00810.1016/j.compscitech.2017.03.008 ↗
10. 10.1016/j.compscitech.2004.06.00110.1016/j.compscitech.2004.06.001 ↗
11. 10.1016/j.compositesb.2008.05.00310.1016/j.compositesb.2008.05.003 ↗
12. 10.1002/pc.2460610.1002/pc.24606 ↗
13. 10.1016/j.compscitech.2004.05.00610.1016/j.compscitech.2004.05.006 ↗
14. 10.1016/j.compstruct.2017.07.09310.1016/j.compstruct.2017.07.093 ↗
15. 10.1177/002199831882270810.1177/0021998318822708 ↗
16. 10.1002/pc.2525110.1002/pc.25251 ↗
17. 10.1016/j.compstruct.2015.06.03810.1016/j.compstruct.2015.06.038 ↗
18. 10.1016/j.polymertesting.2018.05.03710.1016/j.polymertesting.2018.05.037 ↗
19. 10.1016/j.compositesb.2013.12.04110.1016/j.compositesb.2013.12.041 ↗
20. 10.1177/073168441142939410.1177/0731684411429394 ↗
21. 10.1177/073168441562628510.1177/0731684415626285 ↗
22. 10.1080/15376494.2013.83409110.1080/15376494.2013.834091 ↗
23. 10.1016/j.compscitech.2005.05.01510.1016/j.compscitech.2005.05.015 ↗
24. 10.1007/s10853-011-6066-710.1007/s10853-011-6066-7 ↗
25. 10.1177/073168441772858510.1177/0731684417728585 ↗
26. 10.1016/j.compscitech.2011.03.02210.1016/j.compscitech.2011.03.022 ↗
27. 10.1016/j.compositesb.2017.04.00310.1016/j.compositesb.2017.04.003 ↗
28. 10.1177/002199831244551310.1177/0021998312445513 ↗
29. Bert CW, Clary RR. Evaluation of experimental methods for determining dynamic stiffness and damping of composite materials. In: 3rd ASTM international conference on composite materials: testing and design (ASTM STP546) , Williamsburg, VA, USA, 21–22 March 1973, pp. 250–265.10.1520/STP35493S ↗
30. Vanwalleghem J, Baere ID, Loccufier M, et al. Practical aspects in measuring vibration damping of materials. In: 15th international conference on experimental mechanics , Porto, Portugal, 22–27 July 2012.
31. Kadıoğlu F, Coşkun T, Şekerci HU. A novel method to measure dynamic properties of composite materials. In: AIAA/ASCE/AHS/ASC structures, structural dynamics, and materials conference , Kissimmee, Florida, USA, 8–12 January 2018. doi: 10.2514/6.2018-0226.10.2514/6.2018-0226 ↗
32. 10.5923/j.mechanics.20140403.0310.5923/j.mechanics.20140403.03 ↗
33. Hosseinpour K · J Sandwich Struct Mater · 2019 · 0 · 1
34. 10.1016/j.compositesb.2019.03.02810.1016/j.compositesb.2019.03.028 ↗