journal article·2017-08

Investigation of the effect of bonded composite patch on the mixed-mode fracture strength and stress intensity factors for an edge crack in aluminum alloy 2024-T3 plates

HN Maleki, TN Chakherlou

Publisher page

Abstract

In this research, the fracture behavior of an edge crack in aluminum alloy 2024-T3 plate repaired with bonded composite patch has been investigated under mixed-mode loading condition, numerically and experimentally. For the experimental part, two batches of simple edge crack and repaired specimen have been tested by a tensile test machine at different loading levels by using a modified Arcan fixture. According to the experimental results, applying the repair patch improved the fracture strength even as much as 44%. Also, increasing the patch thickness enhances the repair efficiency; nevertheless, increasing the adhesive thickness decreases the strength as much as 3%. Finite element simulations were performed to model the specimens and establish the stress intensity geometry/loading factors. The results indicate that a significant reduction in the geometry/loading factors at the crack tip can be occurred in the presence of the patch.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Metal Forming Simulation Techniques · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

The Faculty of Mechanical Engineering, University of Tabriz, Tabriz, Iran

References (38)

Show source-provided references
1. Rastogi N, Soni SR and Denney JJ. Analysis of bonded composite patch repaired metallic structures-An overview. In: Structural dynamics and materials conference , Long Beach, CA, USA, 1998, pp. 1578–1588.10.2514/6.1998-1883 ↗
2. Baker A. Fatigue crack propagation studies on aluminium panels patched with boron/epoxy composites. In: International conference on aircraft damage assessment and repair: 1991 . Australia: Institution of Engineers, 1991, p. 209.
3. 10.1016/j.engfracmech.2015.04.00810.1016/j.engfracmech.2015.04.008 ↗
4. 10.1016/0961-9526(95)90715-N10.1016/0961-9526(95)90715-N ↗
5. 10.1016/S0142-1123(02)00142-110.1016/S0142-1123(02)00142-1 ↗
6. 10.1016/j.compstruct.2005.11.02410.1016/j.compstruct.2005.11.024 ↗
7. 10.1016/j.compstruct.2006.08.01310.1016/j.compstruct.2006.08.013 ↗
8. 10.1016/j.compscitech.2005.04.02810.1016/j.compscitech.2005.04.028 ↗
9. 10.1111/j.1460-2695.2007.01142.x10.1111/j.1460-2695.2007.01142.x ↗
10. 10.1177/073168441244060110.1177/0731684412440601 ↗
11. 10.1016/j.compositesb.2012.07.04910.1016/j.compositesb.2012.07.049 ↗
12. 10.1177/073168441452524510.1177/0731684414525245 ↗
13. 10.1007/BF0232414610.1007/BF02324146 ↗
14. ASTM. Standard test method for measurement of fatigue crack growth rates . ASTM E647-15. West Conshohocken, PA: ASTM, 2015.
15. Broek D · 2012
16. Broek D · 2012
17. ASTM. Standard guide for preparation of metal surfaces for adhesive bonding . ASTM D2651-90. West Conshohocken, PA: ASTM, 1990.
18. ASTM. Standard test methods for tension testing of metallic materials . ASTM E8. West Conshohocken, PA: ASTM, 2001.
19. ASTM. Standard test method for tensile properties of polymer matrix composite materials . ASTM D3039. West Conshohocken, PA: ASTM, 2000.
20. ASTM. Standard test method for tensile properties of plastics . ASTM D638-02. West Conshohocken, PA: ASTM, 2003.
21. 10.1016/j.matdes.2008.05.04010.1016/j.matdes.2008.05.040 ↗
22. 10.1016/j.matdes.2010.03.04810.1016/j.matdes.2010.03.048 ↗
23. 10.1016/j.matdes.2013.08.04310.1016/j.matdes.2013.08.043 ↗
24. ASTM. Standard test method for plane strain fracture toughness and strain energy release rate of metallic materials . ASTM E399. West Conshohocken, PA: ASTM, 1983.
25. ASTM. Standard test methods for plane-strain fracture toughness and strain energy release rate of plastic materials . ASTM D5045. West Conshohocken, PA: ASTM, 1995.
26. 10.1016/j.msea.2007.05.10310.1016/j.msea.2007.05.103 ↗
27. 10.1023/A:100749522374010.1023/A:1007495223740 ↗
28. 10.1177/00219983820160050310.1177/002199838201600503 ↗
29. 10.1007/BF0232281610.1007/BF02322816 ↗
30. 10.1016/0013-7944(84)90122-X10.1016/0013-7944(84)90122-X ↗
31. 10.1007/978-94-009-6189-010.1007/978-94-009-6189-0 ↗
32. ANSYS R. 14.0, Swanson Analysis Systems Inc., Houston, USA, 2014.
33. 10.1002/nme.162010010310.1002/nme.1620100103 ↗
34. 10.1016/j.engfailanal.2003.10.00310.1016/j.engfailanal.2003.10.003 ↗
35. 10.1016/j.msea.2011.11.03610.1016/j.msea.2011.11.036 ↗
36. Swanson Analysis Systems Inc. ANSYS. User’s Guide for Revision 14, ANSYS 14 Documentation. Theory Reference, Element Library TARGET170 - 3D Target Segment . 2014.
37. Swanson Analysis Systems Inc. ANSYS. User’s Guide for Revision 14, ANSYS 14 Documentation, Theory Reference, Element Library. CONTA174 – 3D Surface-to-Surface Contact . 2014.
38. 10.1016/S0013-7944(98)00088-510.1016/S0013-7944(98)00088-5 ↗