journal article·2017-07

Improving shear strength of bolted joints in pultruded glass fiber reinforced polymer composites using carbon nanotubes

Moneeb Genedy, Rahulreddy Chennareddy, Eslam M Soliman, Usama F Kandil, Mahmoud M Reda Taha

Publisher page

Abstract

The structural design of the bolted fiber reinforced polymer elements is typically governed by the capacity of the joint rather than the fiber reinforced polymer member, while the joint capacity is typically governed by the shear strength of the fiber reinforced polymer. Here, the possibility of improving the shear strength of bolted joints is investigated in the unidirectional glass fiber reinforced polymer plates by incorporating the multiwalled carbon nanotubes during glass fiber reinforced polymer fabrication. Glass fiber reinforced polymer double-shear bolted lap joints were fabricated using up to 1.0 wt% multiwalled carbon nanotubes–-epoxy nanocomposites. Finite element modeling using multicontinuum theory and element deletion techniques was performed to explain the joint behavior. The experimental investigations show that incorporating multiwalled carbon nanotubes improved the shear strength, ductility, and energy absorption significantly. Microstructural analysis proves that a chemical reaction between multiwalled carbon nanotubes and epoxy improves the shear strength of the matrix.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Smart Materials for Construction · Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil Engineering, University of New Mexico, Albuquerque, NM, USA

Department of Civil Engineering, Assiut University, Assiut, Egypt

Egyptian Petroleum Research Institute, Nasr City, Cairo, Egypt

References (32)

Show source-provided references
1. 10.1016/S0950-0618(03)00038-210.1016/S0950-0618(03)00038-2 ↗
2. 10.1016/S0950-0618(03)00040-010.1016/S0950-0618(03)00040-0 ↗
3. Rosner C. Single-bolted connections for orthotropic fibre-reinforced composite structure members . MSc Thesis , Univeristy of Manitoba, Canada, 1992.
4. Heslehurst RB. Design and analysis of structural joints with composite materials . Lancaster, PA: DEStech Pub., Inc., 2013.
5. 10.1016/j.compscitech.2008.09.03710.1016/j.compscitech.2008.09.037 ↗
6. Mosallam AS. Design guide for FRP composite connections. ASCE Manuals and Reports on Engineering Practice No. 102 . Reston, VA: American Society of Civil Engineers, 2011.10.1061/9780784406120 ↗
7. 10.1016/j.compstruct.2012.06.01710.1016/j.compstruct.2012.06.017 ↗
8. 10.1002/978047012142910.1002/9780470121429 ↗
9. Wang MC. Connection capacity of pultruded GFRP channels in multidirectional loading . PhD dissertation, University of Colorado, USA, 2013.
10. Mottram JT. Design guidance for bolted connections in structures of pultruded shapes: Gaps in knowledge. In: Proceedings of the 17th international conference on composite materials (ICCM17), Edinburgh, UK, 27–31 July 2009, paper no. A1: 6, pp. 1–10.
11. American Composites Manufacturers Association. Pre-standard for load & resistance factor design (LRFD) of pultruded fiber reinforced polymer (FRP) structures . Arlington, VA: ACMA, 2012, p. 14.
12. 10.3390/nano303055010.3390/nano3030550 ↗
13. 10.1016/j.matdes.2014.04.04210.1016/j.matdes.2014.04.042 ↗
14. 10.1002/app.3864510.1002/app.38645 ↗
15. 10.1088/0957-4484/18/27/27570810.1088/0957-4484/18/27/275708 ↗
16. 10.1177/002199831142245610.1177/0021998311422456 ↗
17. 10.1061/(ASCE)CC.1943-5614.000050410.1061/(ASCE)CC.1943-5614.0000504 ↗
18. ASTM D3171. Standard test methods for constituent content of composite materials. In: Annual book of ASTM standards . West Conshohocken, PA: ASTM International, 2006.
19. ASTM D3528. Standard test method for strength properties of double lap shear adhesive joints by tension loading. In: Annual book of ASTM standards . West Conshohocken, PA: ASTM International, 2008.
20. ASTM D953. Standard test method for bearing strength of plastics. In: Annual book of ASTM standards . West Conshohocken, PA: ASTM International, 2010.
21. 10.1080/10759410175317250210.1080/107594101753172502 ↗
22. 10.1016/S0266-3538(03)00169-610.1016/S0266-3538(03)00169-6 ↗
23. Autodesk Help, http://help.autodesk.com/view/ACMPAN/2016/ENU/ (accessed 16 August 2015).
24. ASTM D3039/D3039M. Standard test method for tensile properties of polymer matrix composite materials. In: Annual book of ASTM standards . West Conshohocken, PA: ASTM International, 2008.
25. ASTM D3518/D3518M. Standard test method for inplane shear response of polymer matrix composite materials by tensile test of a ±45° laminate. In: Annual book of ASTM standards . West Conshohocken, PA: ASTM International, 2008.
26. ASTM D3410/ D3410M. Standard test method for compressive properties of polymer matrix composite materials with unsupported gage section by shear loading. In: Annual book of ASTM standards . West Conshohocken, PA: ASTM International, 2003.
27. 10.1016/j.compstruct.2012.06.01710.1016/j.compstruct.2012.06.017 ↗
28. Kader MA. Mechanical behavior of multi-row bolted connections of woven fabric GFRP structural members . PhD Dissertation, Nagoya University, Japan.
29. 10.1016/j.matdes.2007.05.00910.1016/j.matdes.2007.05.009 ↗
30. 10.1139/l01-08510.1139/l01-085 ↗
31. 10.5012/bkcs.2004.25.9.130110.5012/bkcs.2004.25.9.1301 ↗
32. 10.1061/(ASCE)CC.1943-5614.000066710.1061/(ASCE)CC.1943-5614.0000667 ↗