Thermoplastic pultrusion process: Modeling and optimal conditions for fibers impregnation
Source abstract
Abstract
Pultrusion is a crucial method for continuous production of fiber-reinforced composites. It was developed several years ago for thermosetting polymer matrices, but the challenge is now to extend it to thermoplastic matrices, with a much higher viscosity. In this paper, we propose an analysis of the parameters influencing fiber impregnation in the conditions of this process. A semi-analytical one-dimensional axisymmetric model based on Darcy’s law and Stokes equations is developed to predict the impregnation profile inside the fibrous phase in the case of a natural impregnation governed by capillary forces. Thanks to a dimensional analysis, it enables to quantify the influence of all the material and testing parameters under the assumption of a slow variation of the geometry of the impregnation die. The cases of a straight and conical dies are discussed. For the first case, an exhaustive numerical study enables to define the optimal processing conditions for a perfect impregnation. Those results are shown to be useful tools for finding an optimal pulling velocity and die length for a given fluid/fibers pair. For the second case, we show that section reductions do not improve impregnation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Mechanical Behavior of Composites · Composite Material Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
LUNAM, Ecole Centrale de Nantes, Institut de recherche en Génie Civil et Mécanique, Nantes, France
LUNAM, Université de Nantes, Laboratoire de Thermocinétique, Nantes, France
References (24)
Show source-provided references
1. 10.1016/S0263-8223(01)00110-610.1016/S0263-8223(01)00110-6 ↗
2. 10.1002/pen.76028050710.1002/pen.760280507 ↗
3. 10.1016/S0263-8223(00)00029-510.1016/S0263-8223(00)00029-5 ↗
4. 10.1016/S1359-835X(98)00196-110.1016/S1359-835X(98)00196-1 ↗
5. 10.1016/S1359-835X(03)00101-510.1016/S1359-835X(03)00101-5 ↗
6. 10.1002/pen.76026201310.1002/pen.760262013 ↗
7. 10.1016/S1359-835X(97)00115-210.1016/S1359-835X(97)00115-2 ↗
8. 10.1177/00219983980320100210.1177/002199839803201002 ↗
9. Simacek P · Compos Sci Technol · 2002 · 60 · 1725
10. 10.1177/089270570201500520210.1177/0892705702015005202 ↗
11. 10.1016/j.compscitech.2006.02.02510.1016/j.compscitech.2006.02.025 ↗
12. 10.1016/j.compscitech.2007.09.01010.1016/j.compscitech.2007.09.010 ↗
13. 10.1016/S1359-835X(97)00002-X10.1016/S1359-835X(97)00002-X ↗
14. 10.1016/S0266-3538(98)00015-310.1016/S0266-3538(98)00015-3 ↗
15. 10.1016/S0266-3538(00)00234-710.1016/S0266-3538(00)00234-7 ↗
16. 10.1016/S0266-3538(01)00104-X10.1016/S0266-3538(01)00104-X ↗
17. Agassant JF, Avenas P, Sergent JF, La mise en forme des matières plastiques, Paris: Tec and Doc Lavoisier, 1996, pp. 355–369.
18. 10.1016/S1359-835X(00)00037-310.1016/S1359-835X(00)00037-3 ↗
19. 10.1002/pc.75012030310.1002/pc.750120303 ↗
20. Dullien FAL · 1992
21. 10.1177/00405175870570110410.1177/004051758705701104 ↗
22. 10.1016/0263-8223(94)90071-X10.1016/0263-8223(94)90071-X ↗
23. Liu HL · Korea-Australia Rheology J · 2009 · 21 · 71
24. 10.1016/j.compscitech.2010.06.00410.1016/j.compscitech.2010.06.004 ↗