journal article·2024-05Open access

Microstructure and mechanical properties of filament and fused deposition modelling printed polylactic-acid and carbon-fiber reinforced polylactic-acid

Adarsh K Shah, Atul Jain

Abstract

Fused deposition modelling (FDM) is a popular additive manufacturing method involving the deposition of a molten filament along a specific path. In this paper, the microstructure and properties of the filament and the printed part are compared to understand the microstructure and property evolution during the printing process. Two commonly used materials Poly-lactic acid (PLA) and carbon fiber-reinforced PLA (CF + PLA) are used for the study. A thorough experimental campaign is undertaken to compare different properties including elastic properties (modulus, ultimate tensile strength, strain to failure), fiber length distribution, fiber orientation distribution, X-ray diffraction (XRD) analysis, and multiscale characterization of damage/mode of failure. The addition of CF reinforcement led to an increase in Young’s modulus and a reduction of the tensile strength for both the filament as well as printed coupons. There is extensive microstructural change during the printing process with major fiber breakage and increased misalignment. In general, Young’s modulus of the printed part is significantly lower than the filament whereas the strength depends on the printing orientation. Both the filament and printed part display complex modes of failure at multiple length scales. The damage modes for the filament and corresponding printed part are different with a strong dependence on the raster orientation for the latter. XRD confirms somewhat different amorphous behavior for the filament and printed part.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Manufacturing Process and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mechanical Engineering Department, Indian Institute of Technology, Kharagpur, India

Funding

Indian Institute of Technology Kharagpur

References (86)

Show source-provided references
1. ISO/ASTM · Rapid Manuf Assoc · 2013 · 10
2. 10.1108/RPJ-06-2016-009010.1108/RPJ-06-2016-0090 ↗
3. 10.1016/j.procir.2016.02.31310.1016/j.procir.2016.02.313 ↗
4. 10.3390/ma1210166410.3390/ma12101664 ↗
5. 10.1016/j.compositesb.2017.05.01310.1016/j.compositesb.2017.05.013 ↗
6. 10.1016/j.mechmat.2020.10337210.1016/j.mechmat.2020.103372 ↗
7. 10.1002/pat.478710.1002/pat.4787 ↗
8. 10.1016/j.matpr.2017.11.37510.1016/j.matpr.2017.11.375 ↗
9. 10.1016/j.mspro.2014.07.14610.1016/j.mspro.2014.07.146 ↗
10. Hernandez R, Slaughter D, Whaley D, et al. Analyzing the tensile, compressive, and flexural properties of 3D printed ABS P430 plastic based on printing orientation using fused deposition modeling. In: 2016 international solid freeform fabrication symposium, Austin, TX, 8–10 August 2016, 939–950.
11. 10.1016/j.matdes.2020.10879910.1016/j.matdes.2020.108799 ↗
12. 10.1016/j.promfg.2019.09.06410.1016/j.promfg.2019.09.064 ↗
13. 10.1002/pen.2541910.1002/pen.25419 ↗
14. 10.3390/polym1314236210.3390/polym13142362 ↗
15. 10.1016/j.matdes.2020.10895310.1016/j.matdes.2020.108953 ↗
16. Abeykoon C · Int. J. Lightweight Mater. Manuf · 2020 · 3 · 284
17. Gupta A, Hasanov S, Fidan I. Processing and characterization of 3d-printed polymer matrix composites reinforced with discontinuous fibers. In: 2019 international solid freeform fabrication symposium, Austin, TX, 12–14 August 2019, 1054–1066.
18. 10.1016/j.polymertesting.2018.04.02910.1016/j.polymertesting.2018.04.029 ↗
19. 10.1108/RPJ-08-2018-019210.1108/RPJ-08-2018-0192 ↗
20. 10.1016/j.jmapro.2021.02.01910.1016/j.jmapro.2021.02.019 ↗
21. 10.3390/polym1310158710.3390/polym13101587 ↗
22. 10.1080/17452759.2017.131721410.1080/17452759.2017.1317214 ↗
23. 10.1016/j.jcomc.2021.10011210.1016/j.jcomc.2021.100112 ↗
24. 10.1016/j.compositesb.2015.06.01310.1016/j.compositesb.2015.06.013 ↗
25. 10.1016/j.compositesb.2017.11.01810.1016/j.compositesb.2017.11.018 ↗
26. 10.1016/j.compscitech.2014.10.00910.1016/j.compscitech.2014.10.009 ↗
27. 10.1016/j.addma.2018.04.03910.1016/j.addma.2018.04.039 ↗
28. Striemann P · Addit Manuf · 2021 · 46 · 102095
29. 10.1016/j.pnucene.2021.10366510.1016/j.pnucene.2021.103665 ↗
30. Kannan S · J Chem Technol Metall · 2021 · 56 · 955
31. 10.1016/j.coco.2022.10116310.1016/j.coco.2022.101163 ↗
32. Cueto CIA · 2017
33. 10.1007/s11665-021-05694-410.1007/s11665-021-05694-4 ↗
34. 10.1007/s11665-021-06566-710.1007/s11665-021-06566-7 ↗
35. 10.1002/app.4878610.1002/app.48786 ↗
36. 10.1016/j.dt.2018.05.00810.1016/j.dt.2018.05.008 ↗
37. 10.1007/s00170-018-2148-x10.1007/s00170-018-2148-x ↗
38. 10.3390/polym1302023710.3390/polym13020237 ↗
39. Jatti VS · Int J Sci Technol Res · 2019 · 8 · 689
40. 10.3390/ma1108133310.3390/ma11081333 ↗
41. 10.1016/j.ijfatigue.2019.02.04210.1016/j.ijfatigue.2019.02.042 ↗
42. 10.1007/s11668-016-0067-410.1007/s11668-016-0067-4 ↗
43. 10.3390/app1009319510.3390/app10093195 ↗
44. 10.1007/s00170-019-03965-y10.1007/s00170-019-03965-y ↗
45. 10.1007/s00170-020-05555-910.1007/s00170-020-05555-9 ↗
46. 10.1016/j.compositesb.2020.10833610.1016/j.compositesb.2020.108336 ↗
47. 10.1016/S1359-835X(02)00114-810.1016/S1359-835X(02)00114-8 ↗
48. 10.1016/j.compositesa.2016.02.02510.1016/j.compositesa.2016.02.025 ↗
49. 10.1002/pc.2627510.1002/pc.26275 ↗
50. Asoodeh F · J Ind Text · 2021 · 51 · 8452S
51. 10.1108/1355254031048963110.1108/13552540310489631 ↗
52. 10.1016/j.mechmat.2020.10337210.1016/j.mechmat.2020.103372 ↗
53. 10.1016/j.jmapro.2015.11.00210.1016/j.jmapro.2015.11.002 ↗
54. 10.1016/j.matdes.2016.05.07810.1016/j.matdes.2016.05.078 ↗
55. Imagesoftware J, 2023; https://imagej.nih.gov/ij/download.html
56. American Society for Testing and Materials · ASTM Int · 2016 · 82 · 1
57. 10.3390/ma1515520510.3390/ma15155205 ↗
58. 10.1080/14658011.2017.139730810.1080/14658011.2017.1397308 ↗
59. 10.1007/s11595-020-2250-410.1007/s11595-020-2250-4 ↗
60. 10.1007/s11665-022-07188-310.1007/s11665-022-07188-3 ↗
61. 10.1088/2053-1591/abe8f310.1088/2053-1591/abe8f3 ↗
62. 10.1002/pc.2587410.1002/pc.25874 ↗
63. 10.1002/pc.2497110.1002/pc.24971 ↗
64. 10.1504/IJRAPIDM.2015.07480910.1504/IJRAPIDM.2015.074809 ↗
65. 10.1002/app.4915210.1002/app.49152 ↗
66. 10.1002/pc.75013061010.1002/pc.750130610 ↗
67. 10.1088/2051-672X/3/1/01400210.1088/2051-672X/3/1/014002 ↗
68. 10.1088/2051-672X/3/1/01400210.1088/2051-672X/3/1/014002 ↗
69. 10.2514/6.2020-192410.2514/6.2020-1924 ↗
70. Chen J · Addit Manuf · 2021 · 47 · 102208
71. 10.3390/jcs501002910.3390/jcs5010029 ↗
72. 10.1002/pc.2605310.1002/pc.26053 ↗
73. 10.1016/j.engfracmech.2022.10876610.1016/j.engfracmech.2022.108766 ↗
74. 10.1088/2053-1591/ab3ff310.1088/2053-1591/ab3ff3 ↗
75. 10.1016/j.egypro.2016.05.04310.1016/j.egypro.2016.05.043 ↗
76. 10.1108/RPJ-11-2019-030010.1108/RPJ-11-2019-0300 ↗
77. 10.1002/pat.464510.1002/pat.4645 ↗
78. 10.1177/073168441775047710.1177/0731684417750477 ↗
79. 10.1177/089270571986940710.1177/0892705719869407 ↗
80. Jain A · J Thermoplast Compos Mater [Internet] · 2023 · 089270572311558
81. 10.3390/ma1004033910.3390/ma10040339 ↗
82. 10.1002/app.5214910.1002/app.52149 ↗
83. 10.3390/polym1423523010.3390/polym14235230 ↗
84. 10.1007/s10118-018-2098-710.1007/s10118-018-2098-7 ↗
85. 10.1016/j.compositesb.2021.10889810.1016/j.compositesb.2021.108898 ↗
86. 10.1016/j.compositesb.2019.10734110.1016/j.compositesb.2019.107341 ↗