Optimization of microstructural morphology via laser processing to enhance the bond strength of Al-CFRP
Source abstract
Abstract
Generating surface-functional microstructures is an effective way to enhance the bonding strength of metal and carbon fiber-reinforced polymer (CFRP). In this study, different microstructural morphologies consisting of two different patterns were generated on the aluminum alloy (A7075) surface via laser processing. The experimental results indicated that different microstructural morphologies contribute to the enhancement of the shear strength of lap joints. The maximum shear strength of these joints was almost four times stronger than that of lap joints without the microstructures. In addition, the investigation indicated that the shear strength was not only determined by surface roughness and contact area but also by the arrangement of different microstructures. These results are mainly due to the combination of mechanical interlocking and physical adhesion. Finally, the corresponding mechanical models of Al-CFRP lap joints were proposed according to the bonding mechanisms and fracture behaviors.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Mechanical Behavior of Composites · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical & Automotive Engineering, South China University of Technology, Guangzhou, China
School of Mechatronic Engineering, Guangdong Polytechnic Normal University, Guangzhou, China
School of Mechanical Engineering, Tianjin Polytechnic University, Tianjin, China
Funding
Major Provincial Projects of Universities in Guangdong Province · National Natural Science Foundation of China
References (38)
Show source-provided references
1. 10.1007/s42114-018-0072-z10.1007/s42114-018-0072-z ↗
2. 10.1557/mrs.2015.12710.1557/mrs.2015.127 ↗
3. 10.1016/j.jmatprotec.2015.02.04010.1016/j.jmatprotec.2015.02.040 ↗
4. 10.1016/j.jmatprotec.2016.08.01710.1016/j.jmatprotec.2016.08.017 ↗
5. 10.1016/j.jmatprotec.2017.06.03410.1016/j.jmatprotec.2017.06.034 ↗
6. 10.1016/j.compstruct.2017.10.02010.1016/j.compstruct.2017.10.020 ↗
7. 10.1016/j.compositesb.2020.10776510.1016/j.compositesb.2020.107765 ↗
8. 10.1016/j.engfailanal.2017.10.01010.1016/j.engfailanal.2017.10.010 ↗
9. Wu X, Zhan L, Zhao X, et al. Effects of surface pre-treatment and adhesive quantity on interface characteristics of fiber metal laminates. Compos Interf 2020; 27: 829–843.10.1080/09276440.2019.1707023 ↗
10. 10.1016/j.compositesb.2017.09.04410.1016/j.compositesb.2017.09.044 ↗
11. 10.1016/j.compositesa.2009.11.00310.1016/j.compositesa.2009.11.003 ↗
12. 10.1016/j.compstruct.2014.07.01910.1016/j.compstruct.2014.07.019 ↗
13. 10.1016/j.ijadhadh.2015.12.00510.1016/j.ijadhadh.2015.12.005 ↗
14. 10.1016/j.compstruct.2016.07.04710.1016/j.compstruct.2016.07.047 ↗
15. 10.1016/j.compositesa.2017.03.01910.1016/j.compositesa.2017.03.019 ↗
16. 10.1016/j.compstruct.2017.12.04310.1016/j.compstruct.2017.12.043 ↗
17. 10.1016/j.jmapro.2019.09.04610.1016/j.jmapro.2019.09.046 ↗
18. 10.1016/j.apsusc.2019.14448710.1016/j.apsusc.2019.144487 ↗
19. 10.1016/j.compositesa.2018.02.04110.1016/j.compositesa.2018.02.041 ↗
20. 10.1016/j.optlastec.2018.04.02310.1016/j.optlastec.2018.04.023 ↗
21. 10.1021/acsami.9b0408010.1021/acsami.9b04080 ↗
22. 10.1007/s11666-015-0352-x10.1007/s11666-015-0352-x ↗
23. 10.1016/j.surfcoat.2017.05.00710.1016/j.surfcoat.2017.05.007 ↗
24. 10.1007/s00170-016-9646-510.1007/s00170-016-9646-5 ↗
25. 10.1016/j.jmatprotec.2017.06.03110.1016/j.jmatprotec.2017.06.031 ↗
26. 10.4028/www.scientific.net/KEM.742.36610.4028/www.scientific.net/KEM.742.366 ↗
27. 10.1016/j.compositesb.2019.10691110.1016/j.compositesb.2019.106911 ↗
28. 10.1016/j.compstruct.2019.11155910.1016/j.compstruct.2019.111559 ↗
29. 10.1016/j.matdes.2017.06.04810.1016/j.matdes.2017.06.048 ↗
30. International A. Standard test method for apparent shear strength of single-lap-joint adhesively bonded metal specimens by tension loading (metal-to-metal). ASTM International, 2010.
31. 10.1016/j.ijadhadh.2010.07.00510.1016/j.ijadhadh.2010.07.005 ↗
32. 10.1016/j.procir.2015.06.05410.1016/j.procir.2015.06.054 ↗
33. 10.1016/j.matpr.2018.06.22410.1016/j.matpr.2018.06.224 ↗
34. 10.1016/j.ijadhadh.2018.06.00110.1016/j.ijadhadh.2018.06.001 ↗
35. Sharpe LH and Schonhorn H. Surface Energetics, Adhesion, and Adhesive Joints. Contact Angle, Wettability, and Adhesion 1964; 8: 189–201.10.1021/ba-1964-0043.ch012 ↗
36. 10.1016/j.ijadhadh.2012.04.00710.1016/j.ijadhadh.2012.04.007 ↗
37. Wenzel RN. Resistance of solid surfaces to wetting by water. Ind Eng Chem 1936; 28: 988–994.10.1021/ie50320a024 ↗
38. 10.1016/j.ijadhadh.2016.10.00710.1016/j.ijadhadh.2016.10.007 ↗