Preparation and mechanical characterization of jute reinforced polypropylene/natural rubber composite
Source abstract
Abstract
Poly(propylene) (PP) matrix jute fiber reinforced composites were prepared by compression molding. Tensile strength (TS), tensile modulus (TM), percentage elongation at break (Eb%), bending strength (BS), bending modulus (BM), impact strength (IS) and hardness of the prepared composites (50% fiber by weight) were found to be 45 MPa, 2305 MPa, 12%, 52 MPa, 4267 MPa, 18 kJ/m 2 and 95 shore-A, respectively. Non-vulcanized natural rubber (NR) was blended (10—50% by weight) with PP using extruder, and films (PP + NR) were prepared by heat press for composite fabrication. Jute fiber reinforced blended PP + NR based composites (50% fiber by weight) were fabricated and characterized. It was found that TS, TM, BS, BM and hardness of the composites were decreased with the increase of NR in PP but IS and Eb% were improved significantly.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Polymer Nanocomposites and Properties · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Nuclear and Radiation Chemistry Division, Institute of Nuclear Science and Technology, Bangladesh Atomic Energy Commission, GPO Box 3787, Dhaka 1000, Bangladesh,
Nuclear and Radiation Chemistry Division, Institute of Nuclear Science and Technology, Bangladesh Atomic Energy Commission, GPO Box 3787, Dhaka 1000, Bangladesh
Department of Applied Chemistry and Chemical Technology, Dhaka University, Dhaka-1000, Bangladesh
Rubber Research Institute of Malaysia, Malaysian Rubber Board, Box: 10150, 50908, Kuala Lumpur, Malaysia
References (5)
Show source-provided references
1. Mohanty AK · Macromol Mater Eng · 2000 · 276 · 2776
2. 10.1016/S0266-3538(03)00094-010.1016/S0266-3538(03)00094-0 ↗
3. 10.1177/073168440910314810.1177/0731684409103148 ↗
4. 10.1002/app.2473810.1002/app.24738 ↗
5. Martuscelli E. · Polypropylene: Structure, Blends and Composites · 1995 · 2 · 1