Multiplexed FBG and etched fiber sensors for process and health monitoring of 2-&3-D RTM components
Source abstract
Abstract
This paper presents research being conducted on the use of a combination of fiber optic sensors for process and health monitoring of resin transfer molded (RTM) composite structures. A laboratory scale RTM apparatus has been designed and built with the capability of visually monitoring the resin filling process and embedding fiber optic sensors into the composite. Fiber Bragg gratings (FBG) and etched fiber sensors (EFS) have been multiplexed and embedded in quasi-2-D panels and 3-D hollow semicircular structures using a novel ingress/egress technique for the purpose of both process and structural health monitoring. The objective of this work is to demonstrate the simultaneous usage of FBGs and etched fiber sensors on a single optical fiber for resin flow monitoring and strain monitoring throughout the life of the composite. Three specimens are presented: one quasi-2D panel with two FBGs and three etched fiber sensors, one semicircular tube with two etched fiber sensors and one semicircular tube with two FBGs. Etched fiber sensors have been correlated with visual inspection to detect the presence of resin. Specimens with embedded FBG sensors have been tested in a tensile test machine to characterize the FBGs for strain monitoring.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Fiber Optic Sensors · Material Properties and Processing · Structural Health Monitoring Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
University of Victoria, Department of Mechanical Engineering Victoria, Canada.
University of Victoria, Department of Mechanical Engineering Victoria, Canada., Sabanci University, Faculty of Engineering and Natural Sciences, Advanced Composites and Polymer Processing Laboratory, Turkey.
University of Victoria, Department of Mechanical Engineering Victoria, Canada.,
References (27)
Show source-provided references
1. Marks P. · 2005
2. Hawk J.
3. Graf NA
4. Schwartz MM · 1997
5. Udd E. · 1995
6. 10.1098/rspa.2007.183410.1098/rspa.2007.1834 ↗
7. Ahn SH · J Compos Mater · 1995 · 29
8. 10.1088/0964-1726/9/2/30410.1088/0964-1726/9/2/304 ↗
9. Green AK · Proc Soc Photo Opt Instrum Eng · 1996 · 2779
10. Kosaka T. · ProcSPIE · 2003 · 5056
11. Dennison CR · Meas Sci Technol · 2008 · 19
12. 10.1063/1.8988110.1063/1.89881 ↗
13. Novo C. · Proc Soc Photo Opt Instrum Eng · 2000 · 4185
14. Dweynter-Marty V. · J Intell Mater Syst Struct · 1998 · 9
15. 10.1016/S0924-4247(99)00266-610.1016/S0924-4247(99)00266-6 ↗
16. 10.1177/002199830606808810.1177/0021998306068088 ↗
17. 10.1016/S0924-4247(02)00429-610.1016/S0924-4247(02)00429-6 ↗
18. Sundaram R. · Proc Soc Photo Opt Instrum Eng · 2005 · 5764
19. Guo ZS · Struct Health Monitor · 2007 · 6
20. Othonos A. · 1999
21. 10.1016/S0266-3538(99)00160-810.1016/S0266-3538(99)00160-8 ↗
22. Hect J. · 2006
23. Novo C., Frazao O., Costa AN, Vieira A., Correia N., Dias I., et al. Progression monitoring of the flow front in RTM process using fibre Bragg grating sensors. Proc SPIE 2000; 4185.10.1117/12.2302292 ↗
24. Eum S., Kageyama K., Murayama H., Ohsawa I., Uzawa K., Kanai M., et al. Resin flow monitoring in vacuum-assisted resin transfer molding using optical fiber distributed sensor. Proc SPIE 2007; 6526.10.1117/12.715339 ↗
25. Eum S., Kageyama K., Murayama H., Uzawa K., Ohsawa I., Kanai M., et al. Process/health monitoring for wind turbine blade by using FBG sensors with multiplexing techniques. Proc SPIE 2008; 7004.10.1117/12.786240 ↗
26. 10.1016/j.sna.2005.01.02110.1016/j.sna.2005.01.021 ↗
27. Wheeler AJ · 2004