journal article·2015-01

Computational analysis and material selection in cross-section of a composite wind turbine blade

Efstathios E Theotokoglou, Georgios A Balokas

Publisher page

Abstract

In wind turbines, blades are critical design members because performance depends on blade material, shape, twist angle, etc. The problem of internal, mechanical design and material selection for a prototypical high-power horizontal axis wind turbine blade under static, flap-wise loading is investigated in this study. At first a materials selection methodology has been proposed. A very detailed computational analysis based on finite element modes is developed representing the load-carrying box girder of the blade with a given airfoil shape, size, and the type and position of the interior load-bearing longitudinal beams–shear webs. Results concerning displacements and stresses are generated using both plane and shell elements with linear and nonlinear analyses.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Wind Energy Research and Development · Structural Load-Bearing Analysis · Structural Analysis and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanics, Laboratory of Testing and Materials, School of Applied Mathematical and Physical Sciences, The National Technical University of Athens (NTUA), Athens, Greece

References (30)

Show source-provided references
1. 10.1002/047084606210.1002/0470846062 ↗
2. Patel MR · 1999
3. 10.1080/1537649090278222310.1080/15376490902782223 ↗
4. 10.1007/s11665-009-9558-810.1007/s11665-009-9558-8 ↗
5. Griffin DA and Ashwill TD. Alternative composite materials for megawatt-scale wind turbine blades: design considerations and recommended testing. In: 41st Aerospace Sciences Meeting and Exhibit , Reno, Nevada, 6–9 January 2003, paper no. AIAA-2003-0696, pp. 1–11. Reston, VA: AIAA.10.2514/6.2003-696 ↗
6. 10.1146/annurev.matsci.35.100303.11064110.1146/annurev.matsci.35.100303.110641 ↗
7. 10.1177/109963620809971010.1177/1099636208099710 ↗
8. Ong C-H and Tsai SW. The use of carbon fibers in wind turbine blade design: a seri-8 blade example . Report no. SAND2000-0478, California, CA: Sandia National Laboratories, 2000, pp.1–74.10.2172/752054 ↗
9. 10.1007/BF0013497610.1007/BF00134976 ↗
10. 10.1177/07316844990180030210.1177/073168449901800302 ↗
11. 10.1007/s10443-005-1117-310.1007/s10443-005-1117-3 ↗
12. 10.1016/j.compositesa.2009.10.01210.1016/j.compositesa.2009.10.012 ↗
13. 10.1016/S0266-3538(03)00227-610.1016/S0266-3538(03)00227-6 ↗
14. 10.1177/002199830504645210.1177/0021998305046452 ↗
15. 10.1177/002199831244013210.1177/0021998312440132 ↗
16. Mandell JF, Samborsky DD, Combw DW, et al. Fatigue of composite material beam elements representative of wind turbine blade substructure . Report National Renewable Energy Laboratory, Colorado, CO: NREL, 1998, pp. 1–159.10.2172/14386 ↗
17. Sorrensen BF · 2004
18. 10.1177/073168441039151510.1177/0731684410391515 ↗
19. 10.1016/j.compstruct.2006.06.00810.1016/j.compstruct.2006.06.008 ↗
20. 10.1260/030952405435370010.1260/0309524054353700 ↗
21. 10.1177/073168441143135710.1177/0731684411431357 ↗
22. Risoe National Laboratory and Det Norske Veritas · 2002
23. Sorensen BF · 2004
24. Hansen PL, Giannis S and Martin RH. Testing and analysis of advanced composite materials and structures in wind turbine applications. In: Proceedings of ICCM17 , Edinburgh, UK, 2010, paper no. TP/2/MS/6/I/10060. Swindon, UK: UK Technology Strategy Board.
25. ANSYS Engineering Analysis System. User’s manual . Swanson Analysis System Inc., Houston, USA, 2007.
26. 10.1002/we.21510.1002/we.215 ↗
27. 10.1002/fld.245410.1002/fld.2454 ↗
28. 10.4028/www.scientific.net/AMR.418-420.60610.4028/www.scientific.net/AMR.418-420.606 ↗
29. 10.4028/www.scientific.net/KEM.525-526.22510.4028/www.scientific.net/KEM.525-526.225 ↗
30. 10.1002/we.160310.1002/we.1603 ↗