journal article·2025-06

Burr constitution analysis in ultrasonic-assisted drilling of CFRP/nano-graphene via experimental and data-driven methodologies

Mohammad Baraheni, Behzad Hashemi Soudmand, Saeid Amini, Masoud Bayat, Ali Ebrahimi

Publisher page

Abstract

In this study, a comprehensive investigation was undertaken to analyze the impact of various factors on thrust force and burr damage in carbon fiber reinforced polymer laminates during drilling operations. The factors examined included the incorporation of nano-graphene, the application of ultrasonic vibration, the type of cutting tool, and the feed rate. Statistical and machine learning techniques were employed to analyze the data, and image processing was utilized to illustrate the extent of burr damage surrounding the drilled holes. The developed model exhibited satisfactory prediction accuracy with minimal error rates. Statistical analysis revealed that the feed rate exerted the greatest influence on thrust force and facilitated the burr generation. Likewise, the addition of nano-graphene resulted in an increased thrust force due to improved rupture limits, consequently leading to cleaner holes with minimal burr damage. Furthermore, the implementation of ultrasonic vibration and the use of high-cobalt cutting tools were found to enhance drilling performance by reducing thrust force and minimizing the burr formation. The best hole quality was achieved at the lowest feed rate, in combination with a cutting tool containing 8% cobalt and the utilization of ultrasonic vibration.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Tunneling and Rock Mechanics · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Manufacturing, Faculty of Mechanical Engineering, Arak University of Technology, Arak, Iran

Division of Plastics and Composites Engineering, Department of Mechanical Engineering, University of Tabriz, Tabriz, Iran

Department of Manufacturing, Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran

Department of Mechanical Engineering, Arak Branch, Islamic Azad University, Arak, Iran

References (94)

Show source-provided references
1. 10.1016/j.triboint.2020.10643910.1016/j.triboint.2020.106439 ↗
2. 10.1016/j.wear.2020.20341210.1016/j.wear.2020.203412 ↗
3. 10.1016/j.triboint.2022.10765410.1016/j.triboint.2022.107654 ↗
4. 10.1016/j.wear.2022.20459510.1016/j.wear.2022.204595 ↗
5. 10.1016/j.engfailanal.2022.10660610.1016/j.engfailanal.2022.106606 ↗
6. 10.1016/j.engfailanal.2020.10511310.1016/j.engfailanal.2020.105113 ↗
7. 10.1002/app.4926010.1002/app.49260 ↗
8. 10.1007/s10853-018-03244-310.1007/s10853-018-03244-3 ↗
9. 10.1016/j.compscitech.2012.05.00510.1016/j.compscitech.2012.05.005 ↗
10. Yazici M, Tİyek İ, Ersoy MS, et al. Modifiye hummers yontemiyle grafen oksit (GO) sentezi ve karakterizasyonu. GU J Sci Part C 2016; 4: 41–48.
11. 10.1016/j.pmatsci.2011.03.00310.1016/j.pmatsci.2011.03.003 ↗
12. 10.1038/s41598-018-20799-y10.1038/s41598-018-20799-y ↗
13. 10.1002/pc.2326210.1002/pc.23262 ↗
14. 10.1016/j.compscitech.2021.10888410.1016/j.compscitech.2021.108884 ↗
15. 10.1016/j.compositesb.2013.05.03410.1016/j.compositesb.2013.05.034 ↗
16. 10.1002/adem.20210078610.1002/adem.202100786 ↗
17. 10.1002/pc.2659810.1002/pc.26598 ↗
18. Soudmand BH, Shelesh-Nezhad K. Experimental investigation on the mechanical properties of co-polypropylene/GF/CaCO3 hybrid nanocomposites. Polym Sci 2016; 58: 454–463.
19. 10.1016/j.tafmec.2020.10266210.1016/j.tafmec.2020.102662 ↗
20. 10.1177/073168441562282010.1177/0731684415622820 ↗
21. Baraheni M, Shelesh-Nezhad K, Miralami A, et al. Experimental studies on morphology and impact behavior of PA6/ABS/CaCO3 nanocomposites. Journal of Science and Technology of Composites 2016; 3: 43–50.
22. 10.1016/j.mechmat.2019.04.00810.1016/j.mechmat.2019.04.008 ↗
23. 10.1016/j.engstruct.2020.11149010.1016/j.engstruct.2020.111490 ↗
24. 10.1016/j.compositesa.2017.02.00410.1016/j.compositesa.2017.02.004 ↗
25. 10.1016/j.compositesa.2019.04.01710.1016/j.compositesa.2019.04.017 ↗
26. 10.1016/j.compscitech.2017.07.03010.1016/j.compscitech.2017.07.030 ↗
27. 10.1016/j.compositesb.2018.02.00410.1016/j.compositesb.2018.02.004 ↗
28. 10.1016/j.compositesb.2018.04.03410.1016/j.compositesb.2018.04.034 ↗
29. 10.1016/j.compstruct.2017.02.07910.1016/j.compstruct.2017.02.079 ↗
30. 10.3390/ma1103044210.3390/ma11030442 ↗
31. 10.1016/j.measurement.2017.06.00810.1016/j.measurement.2017.06.008 ↗
32. 10.1016/j.compositesb.2021.10915510.1016/j.compositesb.2021.109155 ↗
33. 10.1016/j.jmapro.2019.03.00110.1016/j.jmapro.2019.03.001 ↗
34. Islam MM, Li CP, Ko TJ. Dry electrical discharge machining for deburring drilled holes in CFRP composite. Int J Pr Eng Man-Gt 2017; 4: 149–154.
35. 10.1016/j.compstruct.2018.06.05110.1016/j.compstruct.2018.06.051 ↗
36. 10.1016/j.compstruct.2018.07.00710.1016/j.compstruct.2018.07.007 ↗
37. 10.1016/j.compositesb.2012.01.00710.1016/j.compositesb.2012.01.007 ↗
38. 10.1177/095440891772719910.1177/0954408917727199 ↗
39. 10.1007/s00170-018-1981-210.1007/s00170-018-1981-2 ↗
40. 10.1016/j.ijmachtools.2005.10.00410.1016/j.ijmachtools.2005.10.004 ↗
41. 10.1016/j.ijlmm.2019.03.00310.1016/j.ijlmm.2019.03.003 ↗
42. 10.3390/ma1407162810.3390/ma14071628 ↗
43. 10.1016/j.jmapro.2016.12.00910.1016/j.jmapro.2016.12.009 ↗
44. 10.1016/j.compstruct.2014.06.03410.1016/j.compstruct.2014.06.034 ↗
45. 10.1016/j.compstruct.2017.12.00510.1016/j.compstruct.2017.12.005 ↗
46. 10.1007/s00170-019-04872-y10.1007/s00170-019-04872-y ↗
47. Dixit US, Pandey PM, Verma GC. Ultrasonic-assisted machining processes: a review. Int J Mechatron Manuf Syst 2019; 12: 227–254.
48. 10.1016/j.compositesb.2013.04.02210.1016/j.compositesb.2013.04.022 ↗
49. 10.1016/j.ultras.2016.12.01210.1016/j.ultras.2016.12.012 ↗
50. 10.1016/j.jsv.2014.05.04210.1016/j.jsv.2014.05.042 ↗
51. 10.1080/10426914.2016.119802710.1080/10426914.2016.1198027 ↗
52. 10.1016/j.procir.2016.04.02610.1016/j.procir.2016.04.026 ↗
53. 10.1016/j.compchemeng.2017.11.02010.1016/j.compchemeng.2017.11.020 ↗
54. 10.1016/j.measurement.2011.07.02310.1016/j.measurement.2011.07.023 ↗
55. 10.1016/j.measurement.2012.11.03410.1016/j.measurement.2012.11.034 ↗
56. 10.1016/j.procir.2018.09.07210.1016/j.procir.2018.09.072 ↗
57. 10.1108/MMMS-07-2022-012310.1108/MMMS-07-2022-0123 ↗
58. Kaveh A, Hashemi SB, Sheikholeslami R. Optimal design of laminated composite structures via hybrid charged system search and particle swarm optimization. Asian J Civ Eng 2013; 14: 587–604.
59. Kamath G, Mishra B, Tiwari S, et al. Experimental and statistical evaluation of drilling induced damages in glass fiber reinforced polymer composites–Taguchi integrated supervised machine learning approach. Engineered Science 2022; 19: 312–318.
60. 10.1177/002199832098424510.1177/0021998320984245 ↗
61. 10.1007/978-981-16-3297-6_1510.1007/978-981-16-3297-6_15 ↗
62. 10.1109/COMPENG50184.2022.990543810.1109/COMPENG50184.2022.9905438 ↗
63. 10.1080/15397734.2020.172917810.1080/15397734.2020.1729178 ↗
64. 10.2514/6.2020-185910.2514/6.2020-1859 ↗
65. 10.1016/j.dss.2017.05.01210.1016/j.dss.2017.05.012 ↗
66. 10.1016/j.asoc.2020.10703810.1016/j.asoc.2020.107038 ↗
67. 10.1023/A:101093340432410.1023/A:1010933404324 ↗
68. 10.1016/j.compstruct.2021.11467610.1016/j.compstruct.2021.114676 ↗
69. 10.1016/j.scitotenv.2018.09.19610.1016/j.scitotenv.2018.09.196 ↗
70. 10.1016/j.autcon.2023.10479310.1016/j.autcon.2023.104793 ↗
71. 10.1007/978-1-4419-9326-7_110.1007/978-1-4419-9326-7_1 ↗
72. 10.1016/j.patrec.2005.08.01110.1016/j.patrec.2005.08.011 ↗
73. 10.1016/j.ijpvp.2022.10482110.1016/j.ijpvp.2022.104821 ↗
74. 10.1016/j.compstruct.2019.01.03910.1016/j.compstruct.2019.01.039 ↗
75. Wong YJ, Mustapha KB, Shimizu Y, et al. Development of surrogate predictive models for the nonlinear elasto-plastic response of medium density fibreboard-based sandwich structures. Interna Jou Lig Mat Manu 2021; 4: 302–314.
76. Liaw A, Wiener M. Classification and regression by randomForest. R News 2002; 2: 18–22.
77. Belete DM, Huchaiah MD. Grid search in hyperparameter optimization of machine learning models for prediction of HIV/AIDS test results. Int J Comput Appl 2022; 44: 875–886.
78. Wu J, Chen X-Y, Zhang H, et al. Hyperparameter optimization for machine learning models based on Bayesian optimization. Jour Elect Sci Tec 2019; 17: 26–40.
79. 10.1016/j.compscitech.2016.09.00710.1016/j.compscitech.2016.09.007 ↗
80. 10.1007/s00170-018-2875-z10.1007/s00170-018-2875-z ↗
81. 10.1007/s00170-021-07750-810.1007/s00170-021-07750-8 ↗
82. 10.1016/j.procir.2018.09.02510.1016/j.procir.2018.09.025 ↗
83. 10.1007/s40430-019-1658-210.1007/s40430-019-1658-2 ↗
84. 10.1177/002199831349442910.1177/0021998313494429 ↗
85. 10.1177/002199831984481110.1177/0021998319844811 ↗
86. 10.1016/j.jmatprotec.2007.10.05010.1016/j.jmatprotec.2007.10.050 ↗
87. 10.1016/S1359-835X(99)00065-210.1016/S1359-835X(99)00065-2 ↗
88. 10.1016/j.compositesb.2019.10769810.1016/j.compositesb.2019.107698 ↗
89. 10.1016/j.compstruct.2017.11.07310.1016/j.compstruct.2017.11.073 ↗
90. 10.1016/j.compstruct.2016.10.01510.1016/j.compstruct.2016.10.015 ↗
91. 10.1016/j.compstruct.2019.02.09910.1016/j.compstruct.2019.02.099 ↗
92. 10.1007/s00170-017-1520-610.1007/s00170-017-1520-6 ↗
93. 10.1177/073168441244465310.1177/0731684412444653 ↗
94. 10.1016/S0266-3538(99)00067-610.1016/S0266-3538(99)00067-6 ↗