journal article·2017-09

In-plane flexural behaviour and failure prediction of carbon fibre-reinforced aluminium laminates

Ruohang Xu, Yaxin Huang, Yuan Lin, Binsheng Bai, Teng Huang

Publisher page

Abstract

This paper investigated the in-plane bending behaviour of carbon fibre-reinforced aluminium laminates (CARALL). The flexural progressive damage and failure mechanisms were analysed numerically and experimentally. Four types of CARALL specimens with a 3/2 configuration were prepared via hot-pressing using different aluminium alloy materials (2024-T3, 7075-T6 aluminium alloy) and fibre orientations ([0°/90°/0°] 3 , [45°/0°/−45°] 3 ). The three-point bending tests were conducted under static loading. It was found that the primary damage modes were aluminium layer yielding in the mid-span and delamination between the aluminium and carbon fibre-reinforced polymer (CFRP) layers. A user-defined FORTRAN subroutine VUMAT based on ABAQUS was used to simulate the failure of the CFRP, a cohesive zone model was used to predict the inter-laminar failure, and a von Mises plastic model was used to define the isotropic hardening behaviour of the aluminium layers. The predicted results agreed well with the experimental ones. Two convenient calculation methods based on the elasticity mechanics and material mechanics were derived. And the non-linear behaviour of aluminium was considered in the elasticity mechanics method. The theoretical results matched closely with the experimental findings during the linear elastic deformation process.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete · Structural Analysis and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Field Engineering, PLA University of science & Technology, Nanjing, China

The First Research Division, General Equipment Department of the PLA, Wuxi, China

References (25)

Show source-provided references
1. Asundi A · J Mater Process Technol · 1997 · 63 · 38410.1016/S0924-0136(96)02652-0 ↗
2. Botelho EC · Mater Res · 2006 · 9 · 24710.1590/S1516-14392006000300002 ↗
3. Vogelesang LB · J Mater Process Technol · 2000 · 103 · 110.1016/S0924-0136(00)00411-8 ↗
4. Beumler T · Airbus Deutschland GmbH · 2006 · 1 · 1
5. Vlot A · Int J Impact Eng · 1996 · 18 · 29110.1016/0734-743X(96)89050-6 ↗
6. 10.1177/002199831245447810.1177/0021998312454478 ↗
7. Hu YB · Compos Part B Eng · 2015 · 69 · 58710.1016/j.compositesb.2014.11.011 ↗
8. 10.1177/073168441663260610.1177/0731684416632606 ↗
9. Fan J · Compos Struct · 2011 · 93 · 243010.1016/j.compstruct.2011.04.008 ↗
10. Hashin Z · J Appl Mech · 1980 · 47 · 32910.1115/1.3153664 ↗
11. Guan ZW · Eng Struct · 2009 · 31 · 39410.1016/j.engstruct.2008.09.007 ↗
12. 10.1177/00219983870210090410.1177/002199838702100904 ↗
13. Morinière FD · Int J Impact Eng · 2014 · 67 · 2710.1016/j.ijimpeng.2014.01.004 ↗
14. Systemès D · 2014
15. Du D · Compos Part B Eng · 2016 · 91 · 6510.1016/j.compositesb.2015.12.049 ↗
16. Linde P · Compos Struct · 2006 · 73 · 22110.1016/j.compstruct.2005.11.062 ↗
17. Jia L · Compos Part B Eng · 2016 · 105 · 810.1016/j.compositesb.2016.08.017 ↗
18. Turon A · Mech Mater · 2006 · 11 · 107210.1016/j.mechmat.2005.10.003 ↗
19. Benzeggagh ML · Compos Sci Technol · 1996 · 4 · 43910.1016/0266-3538(96)00005-X ↗
20. Camanho PP and Dávila CG. Mixed-mode decohesion finite elements for the simulation of delamination in composite materials . NASA/TM-2002-211737, 2002.
21. Ramberg W and Osgood WR. Description of stress–strain curves by three parameters, Technical Note No. 902, National Advisory Committee For Aeronautics, Washington DC, 1943.
22. Yokoyama T · J Jpn Soc Exp Mech · 2013 · 13 · s114
23. Anand L and Parks DM. Mechanics and materials II defect-free fatigue, 2004. Available at: https://ocw.mit.edu/courses/mechanical-engineering/2-002-mechanics-and-materials-ii-spring-2004/lecture-notes/lec21_notes.pdf (accessed 10 January 2017).
24. Ashton JE · 1970
25. Beer J and DeWolf. Mechanics of materials . New York: McGraw Hill, 2006.