journal article·2011-12

Effect of processing variables and fiber reinforcement on the mechanical properties of wood plastic composites

Mahdi Ashrafi, Ashkan Vaziri, Hamid Nayeb-Hashemi

Publisher page

Abstract

Wood plastic composite (WPC) specimens were fabricated in shapes relevant to flute (musical instrument) production using African blackwood powder and phenolic resin in a hot compression molding setup. The roles of composition and processing parameters on the mechanical properties (flexural strength, elastic modulus, and impact failure energy) were systematically investigated. Cracks were observed in composites with more than 70% wood particles due to the formation of gas in the system during manufacturing, and lack of fluidity in the system to flush out entrapped air and the produced gases. Based on these results, the optimum temperature, pressure, and wood volume fraction for manufacturing WPC in the form of a flute is developed. A further series of experimental procedures were performed to improve the mechanical properties of WPC samples by studying the addition of short glass fibers to the molding compound prior to hot pressing. The results showed that the addition of short fiber did not improve the strength of WPC but rather reduced its strength compared to unreinforced composite. This was attributed to lack of bonding between the short fibers and composite matrix.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Innovations in Concrete and Construction Materials · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical and Industrial Engineering, Northeastern University, Boston, MA 02115, USA.

References (24)

Show source-provided references
1. 10.1002/vnl.2013510.1002/vnl.20135 ↗
2. 10.1299/jsmea.48.43210.1299/jsmea.48.432 ↗
3. 10.1016/j.compositesb.2007.10.00510.1016/j.compositesb.2007.10.005 ↗
4. 10.1007/978-3-642-14877-410.1007/978-3-642-14877-4 ↗
5. 10.1016/j.dental.2005.02.01110.1016/j.dental.2005.02.011 ↗
6. Alvarez-Valencia D, Dagher HJ, Lopez-Anido RA, Davids WG and Gardner DJ. Behavior of natural-fiber/thermoplastic sheet piling. In: Proceedings of the Composites & Polycon 2009, Tampa, FL, USA, 15–17 January 2009, pp. 1–16.
7. 10.1177/073168441036753510.1177/0731684410367535 ↗
8. 10.1007/s12221-009-0083-z10.1007/s12221-009-0083-z ↗
9. 10.1016/j.compscitech.2006.11.00910.1016/j.compscitech.2006.11.009 ↗
10. 10.1002/(SICI)1097-4628(19971121)66:8<1561::AID-APP17>3.0.CO;2-610.1002/(SICI)1097-4628(19971121)66:8<1561::AID-APP17>3.0.CO;2-6 ↗
11. Rizvi GM and Semeralul H. A study of the effects on mechanical properties of WPC due to small inclusions of glass fiber reinforcements. In: 66th Anual Technical Conference of the Society of Plastics Engineers , Milwaukee, WI, USA, 4–8 May 2008, pp. 92–94.
12. 10.1007/s00107-008-0246-410.1007/s00107-008-0246-4 ↗
13. 10.1002/app.1361810.1002/app.13618 ↗
14. 10.1016/j.compositesa.2008.10.00410.1016/j.compositesa.2008.10.004 ↗
15. Wolcott MP and Englund K. A technology review for wood-plastic composites. In: Proceedings of the 33rd International Particleboard/Composite Materials Symposium , Washington State University, Pullman, WA, 13–15 April 1999, pp. 103–111.
16. 10.1007/s00107-005-0072-x10.1007/s00107-005-0072-x ↗
17. Stark N · Wood Fiber Sci · 2003 · 35 · 167
18. 10.1177/002199831037155310.1177/0021998310371553 ↗
19. 10.1002/pen.2070510.1002/pen.20705 ↗
20. 10.1201/978148226774710.1201/9781482267747 ↗
21. 10.1063/1.12068010.1063/1.120680 ↗
22. Witmer EA. Elementary Bernoulli-Euler beam theory. MIT Unified Engineering Course Notes, MIT, 1991-1992, pp. 114–164.
23. 10.1016/j.matdes.2009.03.01110.1016/j.matdes.2009.03.011 ↗
24. 10.1177/073168440809387710.1177/0731684408093877 ↗