Characterization and numerical simulation of laminated glass fiber–polyester composites for a prosthetic running blade
Source abstract
Abstract
The objective of this work was to explore different types of deformations (buckling, bending, and relaxation) on the properties of laminated composites based on polyester as the matrix and glass fiber in two forms: woven and chopped strand mat. The specimens were produced with the same thickness but with different number of ply. Also, a thin gelcoat based on clay particles was applied on the chopped strand mat samples to get a third series. The results showed that using the same thickness, the mechanical properties, especially in terms of bending and buckling, are influenced by the layers’ number. Furthermore, a sports application, which is the main objective of this work, is presented as an applied investigation for a leg prosthesis. Three different running blades “Flex-foot Cheetah” were manufactured to be experimentally and numerically (ANSYS ACP software) characterized to simulate real conditions. The results showed a good agreement between the experimental and numerical values in terms of total displacement, which is around 50 mm, the produced blade has been tested in quasi-static and dynamic compression, and results showed that the relaxation behavior depends on the structure design and the used materials.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Composites and Nanocomposites Center, Moroccan Foundation for Advanced Science, Innovation and Research, Rabat, Morocco
Faculty of Science, Laboratory of Mechanic and Materials (LMM), Mohammed V-Rabat, University, Rabat, Morocco
Materials Science and Nanoengineering Department (MSN), VI Polytechnic University (UM6P), Benguerir, Mohammed, Morocco
Department of chemical engineering and CERMA, Université Laval, Quebec, Canada
References (42)
Show source-provided references
1. Hassani FSA · AIP Conf Proc · 2018 · 1859
2. 10.1016/j.compositesb.2018.08.00410.1016/j.compositesb.2018.08.004 ↗
3. 10.1016/j.matdes.2013.04.09210.1016/j.matdes.2013.04.092 ↗
4. 10.1016/j.compositesb.2016.04.08510.1016/j.compositesb.2016.04.085 ↗
5. Jiang D, Smith DE. Mechanical behavior of carbon fiber composites produced with fused filament fabrication. In: 27th annual international solid free fabrication symposium 2016, pp.884–898.
6. 10.1177/073168441455986410.1177/0731684414559864 ↗
7. Bouhfid N, Raji M, Bensalah M, et al. Functionalized graphene and thermoset matrices–based nanocomposites: mechanical and thermal properties. In: Functionalized graphene nanocomposites their derivatives . Amsterdam, the Netherlands: Elsevier, 2019, pp.47–64.10.1016/B978-0-12-814548-7.00003-9 ↗
8. Osama ME. Introduction and literature review on buckling of composite laminates. vol. 5. Germany: LAP LAMBERT Academic Publishing, 2015, pp.119–122.
9. 10.15282/ijame.4.2011.11.004110.15282/ijame.4.2011.11.0041 ↗
10. 10.1177/073168441453079010.1177/0731684414530790 ↗
11. Belaid S · J Mater Environ Sci · 2015 · 6 · 2795
12. Figliolini AM · Solid Mech Appl · 2014 · 208 · 143
13. Pilato L. Phenolic resins: a century of progress. Berlin, Germany: Springer, 2010, 545p.10.1007/978-3-642-04714-5 ↗
14. 10.1016/j.compositesa.2017.12.02310.1016/j.compositesa.2017.12.023 ↗
15. Ouarhim W, Zari N, Bouhfid R, et al. Mechanical performance of natural fibers–based thermosetting composites. In: Jawaid M, Thariq M and Saba N (eds) Mechanical and physical testing of biocomposites, fibre-reinforced composites and hybrid composites . Amsterdam, the Netherlands: Elsevier, 2019, pp.43–60.10.1016/B978-0-08-102292-4.00003-5 ↗
16. Abramovich H. Introduction to composite materials. In: Stability and vibrations of thin-walled composite structures. Amsterdam, the Netherlands: Elsevier, 2017, pp.1–47.10.1016/B978-0-08-100410-4.00001-6 ↗
17. Bhaskar VV, Srinivas K. Mechanical characterization of glass fiber (woven roving/chopped strand mat E-glass fiber) reinforced polyester composites. In: International conference on functional materials, characterization, solid state physics, power, thermal and combustion energy , 2017, pp.1–5.10.1063/1.4990261 ↗
18. 10.1016/j.mechmat.2016.04.00810.1016/j.mechmat.2016.04.008 ↗
19. D790 ASTM. Standard test method for flexural properties of unreinforced and reinforced plastics and electrical insulation materials. ASTM Stand 2015, pp.1–11.
20. 10.1016/j.msea.2010.11.02810.1016/j.msea.2010.11.028 ↗
21. Raji M · Polym Polym Compos · 2016 · 16 · 101
22. 10.1021/jp408354r10.1021/jp408354r ↗
23. Saraf MN, Gupta RK, Balakrishna KJ. Effect of reinforcement on strength of fibreglass composites with isophthalic polyester resin matrix. India: NISCAIR-CSIR, 1976, pp.132–134.
24. Fallis A. · J Chem Inf Model · 2013 · 53 · 168910.1021/ci400128m ↗
25. 10.1115/1.314953410.1115/1.3149534 ↗
26. 10.1007/s42235-019-0061-010.1007/s42235-019-0061-0 ↗
27. 10.1016/j.ijimpeng.2012.04.00110.1016/j.ijimpeng.2012.04.001 ↗
28. 10.1002/(SICI)1097-4628(19990906)73:10<1993::AID-APP18>3.0.CO;2-Q10.1002/(SICI)1097-4628(19990906)73:10<1993::AID-APP18>3.0.CO;2-Q ↗
29. 10.1002/app.1264310.1002/app.12643 ↗
30. 10.1016/j.polymer.2006.07.06710.1016/j.polymer.2006.07.067 ↗
31. Kachanov LM. Delamination buckling of composite materials. Springer: Brookline, MA, 1908, pp.1–98.
32. 10.1163/156855495X0013810.1163/156855495X00138 ↗
33. 10.1016/j.polymdegradstab.2009.12.00110.1016/j.polymdegradstab.2009.12.001 ↗
34. 10.1016/j.compstruct.2005.04.03210.1016/j.compstruct.2005.04.032 ↗
35. Raji M · Handb Compos Renew Mater · 2017 · 1 · 225
36. 10.1016/S0266-3538(00)00241-410.1016/S0266-3538(00)00241-4 ↗
37. 10.1098/rspb.2011.119410.1098/rspb.2011.1194 ↗
38. 10.1016/S0003-9993(01)80036-810.1016/S0003-9993(01)80036-8 ↗
39. 10.1016/j.compscitech.2011.08.01710.1016/j.compscitech.2011.08.017 ↗
40. Wing DC · Arch Phys Med Rehabil · 1986 · 70 · 330
41. Boujmal R, Essabir H, Nekhlaoui S, et al. Composite from polypropylene and henna fiber: Structural, mechanical and thermal properties. J biobased Mater Bio 2014; 8; 246–252.10.1166/jbmb.2014.1420 ↗
42. Mary S, Keszler T, Hickman G, et al. Advances in Prosthetics and Rehabilitation of Individuals with Limb Loss. Phys Med Rehabil Cli 2019; 30; 423–437.10.1016/j.pmr.2018.12.013 ↗