A comparison of mechanical properties and X-ray tomography analysis of different out-of-autoclave manufactured thermoplastic composites
Source abstract
Abstract
Three different out-of-autoclave manufacturing processes of CF/poly-ether-ether-ketone thermoplastic composites were characterized, including innovative laser-assisted automated fibre placement with in situ consolidation. Characterization techniques included differential scanning calorimetry, ultrasonic non-destructive testing and matrix digestion, in addition to 3D X-ray microcomputed tomography to investigate the void distribution, size and shape. The results revealed that in situ consolidation process can lead to the accumulation of large voids between the upper layers. Interlaminar shear, in-plane shear, tensile and flexure testing were used for mechanical evaluation. A reduction in the mechanical properties was observed for in situ consolidation laminates when compared to the other out-of-autoclave methods. The drop in mechanical properties of in situ consolidation laminates was mainly attributed to the differences found in void distribution and size. Optimization of processing parameters along with higher quality prepreg raw material could be of assistance for the improvement of mechanical properties of in situ consolidation structures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Mechanical Behavior of Composites · Nanofabrication and Lithography Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
FIDAMC, Foundation for the Research, Development and Application of Composite Materials, Spain
Departamento de Materiales y Producción Aeroespacial, E.T.S.I. Aeronáutica y del Espacio, Universidad Politécnica de Madrid, Spain
Centre for Advanced Composite Materials, Department of Mechanical Engineering, University of Auckland, New Zealand
Centre for Advanced Composite Materials, Department of Engineering Science, University of Auckland, New Zealand
References (57)
Show source-provided references
1. 10.1016/S1359-835X(97)00072-910.1016/S1359-835X(97)00072-9 ↗
2. 10.1016/0956-7143(95)95010-V10.1016/0956-7143(95)95010-V ↗
3. 10.1016/S1359-835X(99)00030-510.1016/S1359-835X(99)00030-5 ↗
4. 10.1177/00219983990330040110.1177/002199839903300401 ↗
5. 10.1016/j.optlaseng.2015.03.01610.1016/j.optlaseng.2015.03.016 ↗
6. 10.1016/j.compositesa.2015.08.00810.1016/j.compositesa.2015.08.008 ↗
7. 10.1016/j.compositesa.2013.03.00310.1016/j.compositesa.2013.03.003 ↗
8. 10.1016/j.compositesa.2014.10.00310.1016/j.compositesa.2014.10.003 ↗
9. Rodriguez-Lence F, Martin MI, Horcajo KF. In-situ consolidation of integrated thermoplastic fuselage panels: the future in structural commercial aerocomposites. In: ECCM18 – 18th European conference on composite materials , Athens, Greece, 2018.
10. 10.1016/j.compositesa.2018.05.00610.1016/j.compositesa.2018.05.006 ↗
11. Hoang MD, Simpson JF, Hoa SV. Mechanical properties of thermoplastic composites made by automated fiber placement. In: ICCM20 , Copenhagen, 2015.
12. 10.1177/089270571666251610.1177/0892705716662516 ↗
13. Rodriguez-Lence F, Lorenzo E, Zuazo M, et al. Activities on in-situ consolidation by automated placement technologies. In: Proceedings of 16th the European conferences on composites materials (ECCM16) , Seville, Spain, 2014.
14. 10.1177/09673911100180010110.1177/096739111001800101 ↗
15. 10.1177/089270571769778110.1177/0892705717697781 ↗
16. Francesco MD, Giddings PF, Scott M, et al. Influence of laser power density on the meso-structure of thermoplastic composite preforms manufactured by automated fibre placement. In: SAMPE 2016 , Long Beach, CA, 23–26 May 2016.
17. 10.1016/j.compositesa.2019.03.03510.1016/j.compositesa.2019.03.035 ↗
18. 10.1179/146580109X1254099504580410.1179/146580109X12540995045804 ↗
19. Schledjewski R. · VDI Ber · 245
20. 10.1016/j.compositesa.2018.05.00710.1016/j.compositesa.2018.05.007 ↗
21. 10.1177/002199831244181010.1177/0021998312441810 ↗
22. Zhang D, Heider D, Advani SG, et al. Out of autoclave consolidation of voids in continuous fiber reinforced thermoplastic composites. In: SAMPE , Long Beach, CA, 2013.
23. Biron M. Thermoplastics and thermoplastic composites. 2nd ed. New York: William Andrew, 2012, pp. 1–1044.
24. Thermoplastic aromatic polymer composites – 1st ed. https://www.elsevier.com/books/thermoplastic-aromatic-polymer-composites/cogswell/978-0-7506-1086-5 (accessed 20 October 2018).
25. 10.1179/174328008X32522310.1179/174328008X325223 ↗
26. Valverde MA, Kupfer R, Kawashita LF, et al. Effect of processing parameters on quality and strength in thermoplastic composite injection overmoulded components. In: ECCM18 – 18th European conference on composite materials , Athens, Greece, 2018, p. 8.
27. 10.5028/jatm.2012.04030391210.5028/jatm.2012.040303912 ↗
28. 10.1177/00219980303518810.1177/002199803035188 ↗
29. Oromiehie E. · 2017
30. 10.1002/adv.2017710.1002/adv.20177 ↗
31. 10.1016/S1359-835X(00)00009-910.1016/S1359-835X(00)00009-9 ↗
32. Schledjewski R, Miaris A. Thermoplastic tape placement by means of diode laser heating. In: International SAMPE symposium and exhibition (proceedings ), Baltimore, MD, USA, 2009.
33. Gruber MB, Lockwood IZ, Dolan TL, et al. Thermoplastic in-situ placement requires better impregnated tapes and tows. In: Proceedings of the 2012 SAMPE conference and exhibition , Baltimore, MD, 2012.
34. Lamontia MA, Gruber MB, Systems A, et al. Remaining developments required for commercializing in situ thermoplastic ATP. In: SAMPE , Baltimore, MD, USA, 2007, p. 15.
35. 10.4028/www.scientific.net/AMR.795.6410.4028/www.scientific.net/AMR.795.64 ↗
36. 10.1520/JAI1207610.1520/JAI12076 ↗
37. 10.1016/j.ndteint.2011.11.01110.1016/j.ndteint.2011.11.011 ↗
38. 10.1016/j.compscitech.2013.06.00510.1016/j.compscitech.2013.06.005 ↗
39. 10.1016/j.compositesa.2019.04.02910.1016/j.compositesa.2019.04.029 ↗
40. Ramesh A, Battley M, Allen T, et al. Characterising voids and wrinkles in curved carbon fibre reinforced polymer parts using µ-CT and optical microscopy. In: 18th European conferences of composite materials, ECCM18 , Athens, Greece, 2018.
41. APC-2 PEEK thermoplastic polymer Technical Data Sheet, https://www.cytec.com/sites/default/files/datasheets/APC-2_PEEK_031912-01.pdf.
42. Cytec. Technical data sheet. APC-2-PEEK thermoplastic polymer.
43. Solvay Group. Technical data sheet. APC-2 PEEK thermoplastic polymer prepreg.
44. Martín MI. Modelización del proceso de laminación automática y consolidación in-situ con materiales compuestos termoplásticos APC2/AS4 . Thesis Manuscript, ETSIAE, Universidad Politécnica de Madrid, 2019.
45. ISO 11357-3:2018(E). Plastics – differential scanning calorimetry (DSC), part 3: determination of temperature and enthalpy of melting and crystallization.
46. 10.1016/0032-3861(87)90382-X10.1016/0032-3861(87)90382-X ↗
47. 10.1002/mrd.2248910.1002/mrd.22489 ↗
48. 10.1784/insi.46.11.681.5228010.1784/insi.46.11.681.52280 ↗
49. Ghiorse SR. · SAMPE Q · 1993 · 24 · 54
50. Landro LD · Polym Compos · 2017 · 25 · 10
51. 10.1016/j.compstruct.2005.02.00110.1016/j.compstruct.2005.02.001 ↗
52. Sloan J. OOA: thermoplastic alternative targets performance spec. CompositesWorld , 18 February 2016.
53. 10.1016/j.jsg.2017.07.01310.1016/j.jsg.2017.07.013 ↗
54. Lamontia MA, Gruber MB, Drive S, et al. In situ thermoplastic ATP needs flat tapes and tows with few voids. In: SEICO 09 – Paris, France , 2009.
55. 10.1016/0266-3538(95)00128-X10.1016/0266-3538(95)00128-X ↗
56. 10.1016/j.compscitech.2004.05.01410.1016/j.compscitech.2004.05.014 ↗
57. Rodríguez-Lence F, Zuazo M, Calvo S. In-situ consolidation of PEEK composites by automated placement technologies. In: 20th international conference on composite materials , Copenhagen, 2015, p. 9.