Drilling and mechanical performance analysis on flax-sisal hybrid composite embedded with perforated aluminum foil
Source abstract
Abstract
This paper focused on the investigation of mechanical, twist drilling performance and microstructural analysis in aluminum foil reinforced sisal flax epoxy composite. Six combinations of composite (SF1–SF6) were fabricated by hand layup method with two different orientation of circular (φ = 5 mm) geometrical patterns in aluminum foil (thickness 0.024 mm) as structural reinforcement. The mechanical properties were determined by the tensile, flexural, impact, and hardness investigation with ASTM test specimens. The machinability of the composites was studied through twist drilling operation (8 mm), and the drilling experiments were designed by the design expert 11.0. The analysis was performed on a CNC milling machine (VF-30 CNC VS) vertical milling center with the different process parameters like spindle speed (500–2000 r/min), feed rate (0.05–0.25 mm/min), and hole pitch (20, 40, and 60 mm) in sliding dry environments at room temperature. The fractured composite samples were examined through a scanning electron microscope to determine the fiber pullout, deboning, and voids between the reinforcement and matrix. The obtained results were shown that the sample with 45° staggered hole with 60 mm hole pitch (SF6) composite holds the excellent mechanical properties like tensile strength (31 MPa), flexural strength (76 MPa), impact strength (1.5 J), and hardness value (23 VHN) compared to other combinations. The effect of hole pitch and spindle speed significantly affects the circularity error.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Mechanical Engineering and Vibrations Research · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, <!---->Vellore Institute of Technology<!---->, Vellore, India
References (37)
Show source-provided references
1. Fan M, Fu F. Introduction: a perspective – natural fibre composites in construction. Adv High Strength Nat Fibre Compos Constr 2017; 1–20.
2. Sanjay MR, Yogesha B. Studies on natural/glass fiber reinforced polymer hybrid composites. An evolution. Mat Today Proc 2017; 4: 2739–2747.
3. 10.1088/2053-1591/aafb8810.1088/2053-1591/aafb88 ↗
4. Namvar F, Jawaid M, Md Tahir P, et al. Potential use of plant fibres and their composites for biomedical applications. Bio Res 2014; 9: 5688–5706.
5. Rajisha KR, Deepa B, Pothan LA, et al. Thermomechanical and spectroscopic characterization of natural fibre composites. Interface engineering of natural fibre composites for maximum performance. Wood Pub Ser Compos Sci Eng 2011; 241–274.
6. 10.1177/073168441663389810.1177/0731684416633898 ↗
7. Prabu K, Rajamurugan G, Thirumurugan M. Dynamic mechanical analysis of 304 wire mesh reinforced hybrid jute fiber/epoxy composite. J Ind Text 2019; 1–19. https://doi.org/10.1177/1528083719883057.
8. Mohammad RM, Jamir Mohammad SA, Majid AK. Natural lightweight hybrid composites for aircraft structural applications. Sust Compos Aero Appl 2018; 155–170.
9. Fink JK. Unsaturated polyester resins. React Polym: Fundam Appl 2018; 23: 1–69..
10. 10.1155/2011/80342810.1155/2011/803428 ↗
11. 10.1080/1544047080190139910.1080/15440470801901399 ↗
12. 10.1007/978-94-017-7515-1_1910.1007/978-94-017-7515-1_19 ↗
13. 10.1007/s12034-019-2018-710.1007/s12034-019-2018-7 ↗
14. 10.1177/073168441561845910.1177/0731684415618459 ↗
15. Khalil HM, Seliem AF. Risk assessment of using aluminum foil in food preparation. Ultra Chem 2014; 10: 125–128.
16. 10.1177/0892705703016003004.10.1177/0892705703016003004. ↗
17. 10.1007/s10924-010-0210-310.1007/s10924-010-0210-3 ↗
18. 10.1177/073168440404114710.1177/0731684404041147 ↗
19. 10.1016/j.jmrt.2019.06.00310.1016/j.jmrt.2019.06.003 ↗
20. Arulmurugan M, Prabu K, Rajamurugan G, et al. Viscoelastic behavior of aloevera/hemp/flax sandwich laminate composite reinforced with BaSO4: dynamic mechanical analysis. J Ind Text 2019; 1: 25.
21. 10.3390/ma811538410.3390/ma8115384 ↗
22. 10.1016/j.compositesb.2013.08.01410.1016/j.compositesb.2013.08.014 ↗
23. 10.1016/S1359-835X(99)00020-210.1016/S1359-835X(99)00020-2 ↗
24. 10.4028/www.scientific.net/AMR.410.10210.4028/www.scientific.net/AMR.410.102 ↗
25. 10.1007/s00170-004-2280-710.1007/s00170-004-2280-7 ↗
26. 10.1177/073168441349286610.1177/0731684413492866 ↗
27. 10.1016/j.matdes.2008.03.02210.1016/j.matdes.2008.03.022 ↗
28. 10.1016/j.cirp.2011.03.07810.1016/j.cirp.2011.03.078 ↗
29. 10.1016/j.compstruct.2005.09.03910.1016/j.compstruct.2005.09.039 ↗
30. Reddy Nagavally R. Composite materials - history, types, fabrication techniques, advantages, and applications. Int J Mech Prod Eng 2017; 5: 82–87.
31. Marques AT. Fibrous materials reinforced composites production techniques. In Fibrous and Composite Materials for Civil Engineering Applications. Sawston UK: Woodhead Publishing 2011 pp.191–215.10.1533/9780857095583.3.191 ↗
32. 10.1016/j.proeng.2014.12.44810.1016/j.proeng.2014.12.448 ↗
33. ASTM D3039/D3039M-17. Standard test method for tensile properties of polymer matrix composite materials. West Conshohocken PA: ASTM International 2017.
34. ASTM D790-17. Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials. West Conshohocken PA: ASTM International 2017.
35. ASTM D6110-10. Standard test method for determining the charpy impact resistance of notched specimens of plastics. West Conshohocken PA: ASTM International 2010.
36. ASTM E384-17. Standard test method for microindentation hardness of materials. West Conshohocken PA: ASTM International 2017.
37. 10.21467/ajgr.1.1.40-4810.21467/ajgr.1.1.40-48 ↗