Evaluations of failure initiation criteria for predicting damages of composite structures under crushing loading
Source abstract
Abstract
The crushing behaviors of thin-walled composite structures subjected to quasi-static axial loading are comparatively evaluated using four different failure initiation criteria. Both available crushing tests of composite corrugated plate and square tube are used to validate the stiffness degradation-based damage model with the Maximum-stress criterion. Comparatively, Hashin, Maximum-stress, Stress-based Linde, and Modified criteria are respectively implemented in the damage model to predict crush behaviors of corrugated plate and square tube. To develop failure criteria, effects of shear coefficients and exponents in the Modified and Maximum-stress criteria on damage mechanisms of corrugated plate are discussed. Results show that numerical predictions successfully capture both of experimental failure modes and load–displacement responses. The Modified criterion and particularly Maximum-stress criterion are found to be more appropriate for present crush models of corrugated plate and square tube. When increasing the failure index, the crushing load is decreased, which also causes premature material failure. The shear coefficient and exponents have dramatic influence on the crushing load. Overall, an insight into the quantitative relation of failure initiation is obtained.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Response to Dynamic Loads · Cellular and Composite Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha, China
College of Mechanical and Vehicle Engineering, Hunan University, Changsha, China
AVIC Shenyang Aircraft Design & Research Institute, Shenyang, China
Funding
National Natural Science Foundation of China · Fundamental Research Funds for the Central Universities
References (74)
Show source-provided references
1. 10.1177/073168441562738110.1177/0731684415627381 ↗
2. 10.1007/s10853-018-2248-x10.1007/s10853-018-2248-x ↗
3. 10.1016/j.matdes.2015.09.07010.1016/j.matdes.2015.09.070 ↗
4. 10.1177/073168441769026810.1177/0731684417690268 ↗
5. 10.1007/s11029-018-9699-710.1007/s11029-018-9699-7 ↗
6. 10.1177/073168441769342910.1177/0731684417693429 ↗
7. 10.1016/j.compstruct.2017.02.06410.1016/j.compstruct.2017.02.064 ↗
8. 10.1016/j.ijmecsci.2017.06.05010.1016/j.ijmecsci.2017.06.050 ↗
9. 10.1007/s10443-017-9610-z10.1007/s10443-017-9610-z ↗
10. 10.1080/1358826080267412010.1080/13588260802674120 ↗
11. 10.1007/s11029-017-9626-310.1007/s11029-017-9626-3 ↗
12. 10.1007/s11029-018-9706-z10.1007/s11029-018-9706-z ↗
13. 10.1016/j.compstruct.2016.03.02810.1016/j.compstruct.2016.03.028 ↗
14. 10.1016/j.compositesa.2016.11.03310.1016/j.compositesa.2016.11.033 ↗
15. 10.1016/j.compositesa.2016.06.02310.1016/j.compositesa.2016.06.023 ↗
16. 10.1177/09673911120200030910.1177/096739111202000309 ↗
17. 10.1016/j.compositesa.2006.06.00210.1016/j.compositesa.2006.06.002 ↗
18. 10.1177/002199831452105810.1177/0021998314521058 ↗
19. 10.1007/s10443-015-9470-310.1007/s10443-015-9470-3 ↗
20. 10.1016/j.compositesb.2015.01.04810.1016/j.compositesb.2015.01.048 ↗
21. 10.1177/00219983870210090410.1177/002199838702100904 ↗
22. 10.1177/002199831560294710.1177/0021998315602947 ↗
23. 10.1016/S0266-3538(98)00077-310.1016/S0266-3538(98)00077-3 ↗
24. Hinton MJ · 2004
25. Kaddour AS, Hinton MJ (Guest eds). Evaluation of theories for predicting failure in polymer composite laminates under 3-D states of stress: part A of the second worldwide failure exercise (WWFE-II). J Compos Mater 2012; 46: 19–20.
26. Kaddour AS. · J Compos Mater · 2013 · 47 · 64110.1177/0021998313481399 ↗
27. 10.1177/002199831347871010.1177/0021998313478710 ↗
28. 10.1177/002199831244988510.1177/0021998312449885 ↗
29. 10.1177/002199831349947510.1177/0021998313499475 ↗
30. 10.1177/00219983730070040410.1177/002199837300700404 ↗
31. 10.1016/S0266-3538(96)00140-610.1016/S0266-3538(96)00140-6 ↗
32. 10.1177/00219983710050010610.1177/002199837100500106 ↗
33. 10.1098/rspa.1948.004510.1098/rspa.1948.0045 ↗
34. Tsai SW. Strength characteristics of composite materials , 1965.
35. 10.1177/00219980303518710.1177/002199803035187 ↗
36. 10.1016/S0266-3538(99)00126-810.1016/S0266-3538(99)00126-8 ↗
37. 10.1016/j.compstruct.2009.05.00610.1016/j.compstruct.2009.05.006 ↗
38. 10.1016/j.compositesb.2004.04.00310.1016/j.compositesb.2004.04.003 ↗
39. 10.1016/j.matdes.2009.09.04310.1016/j.matdes.2009.09.043 ↗
40. 10.1016/S0266-3538(99)00092-510.1016/S0266-3538(99)00092-5 ↗
41. 10.1080/13588265.2011.64851610.1080/13588265.2011.648516 ↗
42. 10.1016/j.compscitech.2007.12.00710.1016/j.compscitech.2007.12.007 ↗
43. 10.1016/j.compstruct.2009.09.03510.1016/j.compstruct.2009.09.035 ↗
44. 10.1016/j.compstruct.2015.05.03710.1016/j.compstruct.2015.05.037 ↗
45. 10.1016/j.compscitech.2012.08.00710.1016/j.compscitech.2012.08.007 ↗
46. 10.1177/002199831245148010.1177/0021998312451480 ↗
47. 10.1016/j.compstruct.2014.11.01110.1016/j.compstruct.2014.11.011 ↗
48. 10.1016/j.compositesa.2011.04.01710.1016/j.compositesa.2011.04.017 ↗
49. 10.1016/j.compositesa.2011.08.00410.1016/j.compositesa.2011.08.004 ↗
50. 10.1016/j.compstruct.2010.03.00410.1016/j.compstruct.2010.03.004 ↗
51. 10.1016/j.compositesb.2011.06.01810.1016/j.compositesb.2011.06.018 ↗
52. 10.1016/j.compstruct.2012.03.03910.1016/j.compstruct.2012.03.039 ↗
53. 10.1016/j.compscitech.2016.07.01510.1016/j.compscitech.2016.07.015 ↗
54. 10.1016/j.compstruct.2012.07.01610.1016/j.compstruct.2012.07.016 ↗
55. 10.1016/j.compscitech.2014.04.00910.1016/j.compscitech.2014.04.009 ↗
56. 10.1016/j.compositesa.2009.05.02110.1016/j.compositesa.2009.05.021 ↗
57. CMH-17 meeting results. In: 6th CMH-17 crashworthiness working group, meeting , Ottawa, CA, 5 August 2008.
58. 10.1016/j.compositesa.2005.04.01610.1016/j.compositesa.2005.04.016 ↗
59. Maimí P, Camanho PP, Dávila CG. A thermodynamically consistent damage model for advanced composites. Tech Rep NASA/TM-2006-214282, NASA, 2006.
60. 10.1520/JTE12694J10.1520/JTE12694J ↗
61. 10.1115/1.315366410.1115/1.3153664 ↗
62. 10.1177/00219983780120030510.1177/002199837801200305 ↗
63. Linde P, Pleitner J, De-Boer H, et al. Modelling and simulation of fibre metal laminates. In: ABAQUS users′ conference , 2004, pp.421–439. Boston Massachusetts: ABAQU Inc.
64. 10.1016/j.compstruct.2007.06.00310.1016/j.compstruct.2007.06.003 ↗
65. 10.1016/0167-6636(94)00053-010.1016/0167-6636(94)00053-0 ↗
66. Abaqus 6.13 Analysis user’s manual. Dassault Systemes, 2013.
67. 10.1016/j.compositesb.2017.09.07210.1016/j.compositesb.2017.09.072 ↗
68. Camanho PP, Davila CG. Mixed-Mode decohesion finite elements for the simulation of delamination in composite materials. Tech Rep NASA/TM-2002-211737, 2002.10.2514/6.2001-1486 ↗
69. Tomblin J, Sherraden J, Seneviratne W, et al. A-basis and B-basis design allowables for epoxy-based prepreg Toray T700SC-12K-50C/#2510 plain weave fabric, AGATE-WP3.3-033051-131, September 2002.
70. 10.1016/j.compscitech.2005.12.02310.1016/j.compscitech.2005.12.023 ↗
71. 10.1016/j.tws.2017.12.02010.1016/j.tws.2017.12.020 ↗
72. 10.1016/j.compstruct.2017.03.04710.1016/j.compstruct.2017.03.047 ↗
73. 10.1016/j.mechmat.2014.05.00210.1016/j.mechmat.2014.05.002 ↗
74. 10.1016/j.compstruct.2015.01.03410.1016/j.compstruct.2015.01.034 ↗