journal article·2016-02

Investigation of peel resistance during the fibre placement process

S Rao, R Umer, J Thomas, W J Cantwell

Publisher page

Abstract

In this study, the influence of compaction load, layup speed and temperature on the adhesive properties of automated fibre placement grade towpreg has been investigated on the ply-tool interface where higher peel forces are required to permit the deposition of subsequent plies. The automated layup process was simulated on a CNC milling machine, using a roller assembly and the adhesion properties of the towpreg were determined using a floating roller peel test. The processing window for the towpreg was determined using a dynamic mechanical analyser and a two-level, full factorial design of experiments was developed for the three factors, to understand their effects on the peeling force, both individually and synergistically. The design of experiments analysis indicates a strong temperature effect, with the towpregs requiring a higher layup temperature to accommodate higher layup speeds. A strong load-temperature interaction was detected, with a negative temperature effect at lower loads and a strong positive temperature effect at higher loads. The predicted factor settings to achieve a peeling force of 246 N/m are, 1 kN compaction load, 65℃ layup temperature, and a layup speed of 120 mm/min. Experimental tests, carried out at the predicted factor settings, agree well with the analysis, yielding a peel force of 256 N/m with a standard deviation of 25 N/m.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Epoxy Resin Curing Processes · Metal Forming Simulation Techniques · Manufacturing Process and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Aerospace Research and Innovation Centre, Khalifa University of Science Technology and Research (KUSTAR), Abu Dhabi, UAE

References (33)

Show source-provided references
1. 10.1007/978-1-4615-6389-1_2310.1007/978-1-4615-6389-1_23 ↗
2. 10.1016/0010-4361(70)90009-110.1016/0010-4361(70)90009-1 ↗
3. 10.1016/j.compositesb.2011.12.00310.1016/j.compositesb.2011.12.003 ↗
4. Composites TA. Out-of-Autoclave Prepreg Systems . USA: Ten Cate, 2015.
5. Cytec. CYCOM® 5320-1, Out of Autoclave Prepreg . Woodland Park, NJ: Cytec Inc., 2014.
6. Hexcel. HexPly® M56 . 2014. Stamford, CT: Hexcel, 2014.
7. Composites C. Fiber placement robot . France, 2014.
8. 10.1016/j.compositesa.2013.05.00210.1016/j.compositesa.2013.05.002 ↗
9. 10.1177/089270570606392510.1177/0892705706063925 ↗
10. 10.1108/0144515001035324210.1108/01445150010353242 ↗
11. 10.1177/08927057970100060410.1177/089270579701000604 ↗
12. Lukaszewicz DHJA, Weaver PM, Potter KD, et al. An empirical model for the automated deposition of thermoset composite, in annual technical conference . In: 24th American society for composites , 2009, American Society for Composites.
13. 10.1016/j.compositesa.2011.10.01410.1016/j.compositesa.2011.10.014 ↗
14. Calawa R and Nancarrow J. Medium wave infrared heater for high-speed fiber placement. 2007, SAE Technical Paper.10.4271/2007-01-3842 ↗
15. 10.1002/app.1992.07045030410.1002/app.1992.070450304 ↗
16. Gutowski TG. Cost, Automation and Design. In: Gutowski TG (ed.) Advanced composites manufacturing . New York, NY: John Wiley & Sons, Inc. 1997.
17. Rao S · Polym Polym Compos · 2015 · 26 · 359
18. International ASTM · 2009
19. 10.1002/pc.75013030810.1002/pc.750130308 ↗
20. 10.1007/s11340-009-9236-710.1007/s11340-009-9236-7 ↗
21. International ASTM · 2010
22. 10.1177/00219980303518810.1177/002199803035188 ↗
23. 10.1016/j.compositesa.2014.10.00410.1016/j.compositesa.2014.10.004 ↗
24. 10.1016/j.compositesa.2014.08.01910.1016/j.compositesa.2014.08.019 ↗
25. 10.1177/00219983970310030210.1177/002199839703100302 ↗
26. 10.1007/s00170-010-3028-110.1007/s00170-010-3028-1 ↗
27. 10.1016/j.compositesa.2013.03.00310.1016/j.compositesa.2013.03.003 ↗
28. 10.1016/j.tca.2009.01.00110.1016/j.tca.2009.01.001 ↗
29. 10.1016/j.polymertesting.2012.11.00410.1016/j.polymertesting.2012.11.004 ↗
30. 10.1177/095440541141181710.1177/0954405411411817 ↗
31. Robert W · 2004
32. Lochner RH · 1990
33. 10.1080/00401706.1959.1048986610.1080/00401706.1959.10489866 ↗