Review on the methodologies adopted to minimize the material damages in drilling of carbon fiber reinforced plastic composites
Source abstract
Abstract
The applications of carbon fiber reinforced plastic materials have increased widely in the fields of aerospace, automotive, maritime, and sports equipment because of their excellent mechanical properties. Machining of carbon fiber reinforced plastics has a considerably more complex effect on drilling qualities than machining of conventional metals and their alloys due to the nonlinear, inhomogeneous, and abrasive nature of CFRPs. This article addresses the methodologies that have been adopted to minimize the material damages in drilling of polymeric composite materials. Key papers are reviewed with respect to tool types, materials, geometry and coatings, back-up plate, coolants, environment, unconventional machining, and high-speed drilling methodologies, which influence the hole qualities of delamination, burr, surface roughness, cylindricity, diameter error, and thermal damage with the effect of cutting variables (spindle speed and feed rate). In addition, some deburring strategies are also reviewed and discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Automobile Engineering, Kalasalingam University, Krishnankoil, India
Faculty of Mechanical Engineering, Kalasalingam University, Krishnankoil, India
School of Mechanical Engineering, Yeungnam University, Gyeongsangbuk-do, South Korea
References (97)
Show source-provided references
1. 10.1016/j.paerosci.2005.02.00410.1016/j.paerosci.2005.02.004 ↗
2. Koplev A. Cutting of CFRP with single edge tools. In: Proceedings of the 3rd international conference on advances in composite materials , Paris, 26–29 August 1980, pp. 1597–1605.10.1016/B978-1-4832-8370-8.50126-1 ↗
3. 10.1016/j.compstruct.2015.09.02810.1016/j.compstruct.2015.09.028 ↗
4. 10.1115/1.402652610.1115/1.4026526 ↗
5. 10.1016/j.dt.2018.02.00110.1016/j.dt.2018.02.001 ↗
6. 10.1080/09243046.2014.92896610.1080/09243046.2014.928966 ↗
7. 10.1080/10910344.2013.80609810.1080/10910344.2013.806098 ↗
8. 10.1016/S0261-3069(03)00062-110.1016/S0261-3069(03)00062-1 ↗
9. 10.1016/j.ijmachtools.2011.08.00910.1016/j.ijmachtools.2011.08.009 ↗
10. 10.1016/j.ijmachtools.2004.02.01910.1016/j.ijmachtools.2004.02.019 ↗
11. 10.1016/j.jmatprotec.2006.04.12610.1016/j.jmatprotec.2006.04.126 ↗
12. 10.1016/j.ijmachtools.2009.05.00910.1016/j.ijmachtools.2009.05.009 ↗
13. 10.1016/j.ijmachtools.2011.05.00410.1016/j.ijmachtools.2011.05.004 ↗
14. 10.1016/j.compstruct.2009.10.01010.1016/j.compstruct.2009.10.010 ↗
15. 10.1007/s12541-013-0252-210.1007/s12541-013-0252-2 ↗
16. 10.4028/www.scientific.net/MSF.800-801.6110.4028/www.scientific.net/MSF.800-801.61 ↗
17. Ismail SO · Eng Sci Technol · 2016 · 19 · 2043
18. 10.1016/j.jmrt.2014.10.00310.1016/j.jmrt.2014.10.003 ↗
19. 10.1177/073168441770935910.1177/0731684417709359 ↗
20. 10.1007/s00170-013-4817-010.1007/s00170-013-4817-0 ↗
21. Ogawa K · Adv Mater Process Technol 2015; 1 · 192
22. 10.1007/s00170-014-6199-310.1007/s00170-014-6199-3 ↗
23. 10.1016/j.compositesb.2011.08.05410.1016/j.compositesb.2011.08.054 ↗
24. 10.1007/s12541-015-0222-y10.1007/s12541-015-0222-y ↗
25. 10.1177/073168441244465310.1177/0731684412444653 ↗
26. 10.1016/j.ijrmhm.2013.04.01710.1016/j.ijrmhm.2013.04.017 ↗
27. 10.1016/j.jmrt.2017.06.00310.1016/j.jmrt.2017.06.003 ↗
28. 10.1007/s00170-017-0880-210.1007/s00170-017-0880-2 ↗
29. 10.1016/j.compscitech.2009.01.02510.1016/j.compscitech.2009.01.025 ↗
30. Dharan C. Lecture on composite materials machining . PhD Thesis, INEGI, Porto, 2000.
31. 10.1016/j.compstruct.2009.10.03510.1016/j.compstruct.2009.10.035 ↗
32. 10.1016/j.ijmachtools.2015.04.00610.1016/j.ijmachtools.2015.04.006 ↗
33. 10.1016/j.compositesb.2012.07.05710.1016/j.compositesb.2012.07.057 ↗
34. 10.3390/ma910082810.3390/ma9100828 ↗
35. 10.1007/s00170-016-8967-810.1007/s00170-016-8967-8 ↗
36. 10.1016/j.compstruct.2016.02.08410.1016/j.compstruct.2016.02.084 ↗
37. 10.1016/j.ijmachtools.2004.08.00110.1016/j.ijmachtools.2004.08.001 ↗
38. 10.1016/j.ijmachtools.2004.09.01010.1016/j.ijmachtools.2004.09.010 ↗
39. 10.1016/j.ijmachtools.2016.08.00610.1016/j.ijmachtools.2016.08.006 ↗
40. 10.1016/j.compositesa.2012.11.02010.1016/j.compositesa.2012.11.020 ↗
41. 10.1080/10426914.2017.140171510.1080/10426914.2017.1401715 ↗
42. 10.1007/s00170-015-7124-010.1007/s00170-015-7124-0 ↗
43. 10.1007/s00170-018-1981-210.1007/s00170-018-1981-2 ↗
44. 10.1016/j.compstruct.2013.04.02610.1016/j.compstruct.2013.04.026 ↗
45. 10.1016/j.jmatprotec.2012.05.01710.1016/j.jmatprotec.2012.05.017 ↗
46. 10.1016/j.wear.2013.01.04610.1016/j.wear.2013.01.046 ↗
47. 10.1016/j.compstruct.2016.07.02510.1016/j.compstruct.2016.07.025 ↗
48. 10.1016/j.jmatprotec.2015.03.04010.1016/j.jmatprotec.2015.03.040 ↗
49. 10.1177/168781401667028110.1177/1687814016670281 ↗
50. 10.1016/j.jmatprotec.2007.10.05010.1016/j.jmatprotec.2007.10.050 ↗
51. 10.1016/j.msea.2007.03.02310.1016/j.msea.2007.03.023 ↗
52. 10.1016/0043-1648(95)06831-710.1016/0043-1648(95)06831-7 ↗
53. 10.1177/002199830809220510.1177/0021998308092205 ↗
54. 10.1016/j.matdes.2008.03.01410.1016/j.matdes.2008.03.014 ↗
55. 10.1016/j.wear.2009.01.03110.1016/j.wear.2009.01.031 ↗
56. 10.1016/j.cirp.2009.03.10010.1016/j.cirp.2009.03.100 ↗
57. 10.4028/www.scientific.net/AMR.102-104.72910.4028/www.scientific.net/AMR.102-104.729 ↗
58. 10.1016/j.compositesb.2012.01.00710.1016/j.compositesb.2012.01.007 ↗
59. 10.1007/s00170-016-9268-y10.1007/s00170-016-9268-y ↗
60. 10.1016/S0007-8506(07)61472-310.1016/S0007-8506(07)61472-3 ↗
61. 10.4028/www.scientific.net/AMR.325.36910.4028/www.scientific.net/AMR.325.369 ↗
62. 10.1177/073168441141626610.1177/0731684411416266 ↗
63. 10.1007/s00170-015-7284-y10.1007/s00170-015-7284-y ↗
64. 10.3390/aerospace501000910.3390/aerospace5010009 ↗
65. 10.1016/j.jallcom.2016.12.27510.1016/j.jallcom.2016.12.275 ↗
66. 10.3390/app707066710.3390/app7070667 ↗
67. 10.1177/002199831142462510.1177/0021998311424625 ↗
68. 10.1080/10426914.2017.141545210.1080/10426914.2017.1415452 ↗
69. 10.1016/j.ijmachtools.2011.04.00710.1016/j.ijmachtools.2011.04.007 ↗
70. 10.1016/j.ijmachtools.2005.01.01510.1016/j.ijmachtools.2005.01.015 ↗
71. 10.4028/www.scientific.net/AMR.479-481.21310.4028/www.scientific.net/AMR.479-481.213 ↗
72. 10.1016/j.cirp.2012.03.03610.1016/j.cirp.2012.03.036 ↗
73. 10.1016/j.cirp.2014.03.07010.1016/j.cirp.2014.03.070 ↗
74. 10.1016/j.compstruct.2015.11.04310.1016/j.compstruct.2015.11.043 ↗
75. 10.1115/1.144831710.1115/1.1448317 ↗
76. 10.1016/S0890-6955(03)00127-510.1016/S0890-6955(03)00127-5 ↗
77. 10.1016/j.ijmachtools.2005.08.01510.1016/j.ijmachtools.2005.08.015 ↗
78. 10.1016/j.ijmachtools.2007.05.00810.1016/j.ijmachtools.2007.05.008 ↗
79. Miguel L, Durão P, Tavares JMRS, et al. Damage analysis of carbon / epoxy plates after drilling. International Journal of Materials and Product Technology 2008; 32: 226–242.10.1504/IJMPT.2008.018983 ↗
80. Faraz A, Biermann D. Experimental investigations on drilling of woven CFRP epoxy laminates: the effect of pilot-hole or drill chisel edge on delamination. In: Proceedings of the 36th international MATADOR conference . London: Springer, 2010, pp. 223–226.10.1007/978-1-84996-432-6_51 ↗
81. 10.1177/095440541141333510.1177/0954405411413335 ↗
82. 10.1177/002199831772636610.1177/0021998317726366 ↗
83. 10.1016/j.procir.2014.03.05010.1016/j.procir.2014.03.050 ↗
84. 10.1177/073168441142741910.1177/0731684411427419 ↗
85. 10.1016/j.compositesb.2013.04.02210.1016/j.compositesb.2013.04.022 ↗
86. 10.1016/j.jmapro.2016.12.00910.1016/j.jmapro.2016.12.009 ↗
87. 10.1016/j.jallcom.2017.07.10810.1016/j.jallcom.2017.07.108 ↗
88. 10.1007/s00170-017-1488-210.1007/s00170-017-1488-2 ↗
89. 10.1016/j.phpro.2012.10.02610.1016/j.phpro.2012.10.026 ↗
90. 10.1007/s12206-017-0741-910.1007/s12206-017-0741-9 ↗
91. 10.1007/s00339-016-9607-810.1007/s00339-016-9607-8 ↗
92. 10.1080/10426914.2017.127929610.1080/10426914.2017.1279296 ↗
93. 10.1016/j.ultras.2014.03.01210.1016/j.ultras.2014.03.012 ↗
94. 10.1016/j.jallcom.2017.02.00110.1016/j.jallcom.2017.02.001 ↗
95. 10.1007/s40684-017-0018-x10.1007/s40684-017-0018-x ↗
96. Kurniawan R, et al. Measurement of burr removal rate and analysis of machining parameters in ultrasonic assisted dry EDM (US-EDM) for deburring drilled holes in CFRP composite. Measurement 2017; 110: 98–115.10.1016/j.measurement.2017.06.008 ↗
97. 10.1016/j.measurement.2018.03.07610.1016/j.measurement.2018.03.076 ↗