Influence of end distances on the failure of composite bolted joints
Source abstract
Abstract
To explore the physical effect of end distances on mechanical behaviors of composite bolted joints, series of single-bolt composite joints designed with different end distances were tested. In conjunction with the experimental work, a numerical progressive damage method is introduced to trace the damage process from the onset and propagation up to ultimate failure of the joints. A group of material degradation factors is presented by a trial-and-error method to establish three-dimensional progressive damage models of the bolted joints. The progressive damage analyses show that the predicted load–displacement curves, failure loads, and failure patterns of bolted joints with different end distances are in good agreements with the related experimental outcomes. From the experimental and numerical results, it follows that the cleavage failure gradually switches to the bearing failure with the increasing ratio of E/ D ranged from about 2 to 4. An economic and suitable ratio of E/ D ≈ 3 is provided for the bolted joints made of X850 carbon/epoxy composites with balanced and symmetric layups [45/0/−45/0/90/0/45/0/−45/0] s . The understanding of the effect of E/ D on the mechanical behaviors including the strength, stiffness, and failure patterns of single-bolt joints is strengthened.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Fatigue and fracture mechanics · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Solid Mechanics, Beihang University, Beijing, PR China
School of Astronautics, Beihang University, Beijing, PR China
Large Aircraft Advanced Training Center, Beihang University, Beijing, PR China
References (51)
Show source-provided references
1. Deo RB, Starnes JH and Holzwarth RC. Low-cost composite materials and structures for aircraft applications. In: Meeting on “low cost composite structures, ” Loen, 2001, pp.(SM1)1-1-12. Brussels: NATO Science and Technology Organization.
2. Roeseler WG, Sarh B and Kismarton MU. Composite structures: the first 100 years. In: Sixteenth international conference on composite materials , Kyoto, 2007, pp. 1-10. Tokyo: Business Center for Academic Society.
3. 10.1177/073168441039768110.1177/0731684410397681 ↗
4. 10.1177/073168441244465310.1177/0731684412444653 ↗
5. 10.1177/073168441038503410.1177/0731684410385034 ↗
6. Hart-Smith LJ · 1976
7. 10.1016/j.compstruct.2004.04.05310.1016/j.compstruct.2004.04.053 ↗
8. 10.1016/S0266-3538(01)00043-410.1016/S0266-3538(01)00043-4 ↗
9. 10.1177/00219983930270180310.1177/002199839302701803 ↗
10. 10.1016/0010-4361(77)90027-110.1016/0010-4361(77)90027-1 ↗
11. 10.1177/07316844980170030210.1177/073168449801700302 ↗
12. 10.1016/S1359-8368(03)00065-910.1016/S1359-8368(03)00065-9 ↗
13. Chang FK · 1984
14. 10.1016/j.compstruct.2004.10.00910.1016/j.compstruct.2004.10.009 ↗
15. 10.1016/j.compscitech.2003.11.00510.1016/j.compscitech.2003.11.005 ↗
16. 10.1016/j.compositesb.2011.11.03010.1016/j.compositesb.2011.11.030 ↗
17. 10.1177/00219983870210090410.1177/002199838702100904 ↗
18. 10.1177/00219983870210090310.1177/002199838702100903 ↗
19. 10.1177/00219983960300120410.1177/002199839603001204 ↗
20. 10.1177/00219983950290050710.1177/002199839502900507 ↗
21. 10.1177/073168441350085810.1177/0731684413500858 ↗
22. 10.1177/073168440809775810.1177/0731684408097758 ↗
23. 10.1016/S1359-835X(97)00004-310.1016/S1359-835X(97)00004-3 ↗
24. 10.1016/j.compscitech.2008.09.03710.1016/j.compscitech.2008.09.037 ↗
25. Pisano AA, Fuschi P and Domenico DD. Direct Methods for Limit States in Structures and Materials , 2014. Berlin: Springer.
26. 10.1016/j.compscitech.2013.04.01810.1016/j.compscitech.2013.04.018 ↗
27. 10.1016/j.compstruct.2004.09.02510.1016/j.compstruct.2004.09.025 ↗
28. 10.1016/j.compstruct.2013.09.01910.1016/j.compstruct.2013.09.019 ↗
29. 10.1016/j.compstruct.2013.10.02610.1016/j.compstruct.2013.10.026 ↗
30. Ting R · 1983
31. 10.1177/073168441452233110.1177/0731684414522331 ↗
32. 10.1177/002199831347716910.1177/0021998313477169 ↗
33. 10.1177/002199831246071310.1177/0021998312460713 ↗
34. 10.1016/j.compstruct.2013.01.00810.1016/j.compstruct.2013.01.008 ↗
35. ASTM D 5961M-01 · 2001
36. 10.1177/00219983780120030510.1177/002199837801200305 ↗
37. 10.1115/1.315366410.1115/1.3153664 ↗
38. 10.1177/00219983990330240210.1177/002199839903302402 ↗
39. 10.1177/00219983910250050510.1177/002199839102500505 ↗
40. Shokrieh MM, Lessard LB and Poon C. Three-dimensional progressive failure analysis of pin/bolt loaded composite laminates. In: Agard conference proceedings of the 83rd meeting of the AGARD SMP on bolted joints in polymeric , Neuilly sur Seine, 1996 pp.7-1-10.
41. 10.1046/j.1460-2695.2001.00424.x10.1046/j.1460-2695.2001.00424.x ↗
42. 10.1016/S1359-8368(02)00033-110.1016/S1359-8368(02)00033-1 ↗
43. 10.1016/j.compositesb.2012.08.02510.1016/j.compositesb.2012.08.025 ↗
44. 10.1016/j.compositesb.2004.11.00310.1016/j.compositesb.2004.11.003 ↗
45. 10.1016/j.compstruct.2012.03.01110.1016/j.compstruct.2012.03.011 ↗
46. 10.1016/j.compstruct.2012.01.01610.1016/j.compstruct.2012.01.016 ↗
47. 10.1016/j.compstruct.2013.06.01710.1016/j.compstruct.2013.06.017 ↗
48. Agarwal BL. Static strength prediction of bolted joint in composite materials. AIAA J 1980; 18(11): 1371-1375.10.2514/3.50892 ↗
49. 10.1177/00219983960300120110.1177/002199839603001201 ↗
50. 10.1016/j.compscitech.2005.02.01110.1016/j.compscitech.2005.02.011 ↗
51. 10.1016/j.compositesb.2003.11.00110.1016/j.compositesb.2003.11.001 ↗